Bitcoin Diamond (BCD) X13 | Mining Pools

Bitcoin Rhodium Mining Guide

Bitcoin Rhodium Mining Guide
Happy Mining!

All available XRC pools can be found on MiningPoolStats

Bitcoin Rhodium Mining Hardware

Baikal Giant+: 1.6 GH/s
Baikal Quad Cube: 1.2 GH/s
Baikal Giant: 900 MH/s
Baikal Quadruple Mini Miner: 600 MH/s
Baikal Miner Cube: 300 MH/s
Baikal Mini Miner: 150 MH/s

Mining Setup

To mine Bitcoin Rhodium you need to set up an XRC wallet and configure your miner of choice. You can choose between Web wallet, Electrum-XRC or Magnum wallet. To set up a web wallet please visit wallet.bitcoinrh.org. Or download and install Electrum-XRC wallet (recommended) for Windows, Linux and MacOS.
Web wallet: wallet.bitcoinrh.org
Electrum-XRC wallet: electrum.bitcoinrh.org
Magnum wallet: https://magnumwallet.co

Sign up for XRC web wallet if not yet done so

  1. Create an account, with your username, password and secure question.
  2. Sign in and click “Create Wallet”.
  3. Set up a strong transaction password. Make sure you store it securely in a secure password manager of choice.
  4. Copy the seed somewhere safe. It’d be a good idea to write seed on a hardcopy and keep it safe.
  5. Paste it to confirm you got it right.
  6. Grab an address for the mining step. Your wallet is now ready to mine XRC.

Instructions for mining XRC on the official pool

Pool link: poolcore.bitcoinrh.org
  1. Any miner that supports X13 will be able to mine XRC. We have a few examples below of miners that are well tested with Bitcoin Rhodium network.
  2. For any miner, configure the miner to point to:
(0–0.8 GH/s) stratum+tcp://poolcore.bitcoinrh.org:3061
(0.8–2 GH/s) stratum+tcp://poolcore.bitcoinrh.org:3062
(3–4 GH/s) stratum+tcp://poolcore.bitcoinrh.org:3063
(5+ GH/s) stratum+tcp://poolcore.bitcoinrh.org:3064
with your XRC address as username and x as password. You don’t need to open an account on pool. You will be mining to XRC address and mined coins will be transferred to your wallet
after blocks reach 10 block maturity
after you mined up minimal amount of coins (currently 0.1 XRC)
sometimes mined blocks could get rejected by network (orphaned) after they were counted as valid blocks. This is normal network behavior to follow longest chain
  1. http://poolcore.bitcoinrh.org is used to follow your miner and network statistics.

CPU Miner-Multi

Source: https://github.com/tpruvot/cpuminer-multi
Sample configuration with CPU Miner tested on UBUNTU.
{
“url” : “stratum+tcp://poolcore.bitcoinrh.org:3061”, “user” : “YOUR XRC ADDRESS”,
“pass” : “x”,
“algo” : “x13”, “threads” : 1,
“cpu-priority” : 5,
“cpu-affinity” : 1, “benchmark” : false, “debug” : true, “protocol”: true, “show-diff”: true, “quiet” : false
}
Command to run your CPUMiner: cpuminer -c cpuminer.json

SGMiner (ATI GPU)

SGMiner is a GPU-based mine: https://github.com/nicehash/sgminereleases
The configuration below was tested on Windows:
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
cd C:\Software\sgminer-5.6.1-nicehash-51-windowsamd64 sgminer.exe
— gpu-platform 1 — algorithm x13mod -url stratum+tcp://poolcore.bitcoinrh. org:3062 — pool-user — userpass :x — auto-fan — temp-target 70 — temp-over- heat 82 — temp-cutoff 85 — gpu-fan 65–85 — log-file log.txt — no-adl — no-extra- nonce -P –T

CCMiner (NVIDIA GPU)

CCMiner is a GPU-based miner (NVIDIA)
Command to run your CCMINER:
ccminer-x64.exe -a x13 -o stratum+tcp://poolcore.bitcoinrh.org:3062 -O :without -D — show-diff

Baikal miner

Settings: Url:
(0–2 GH/s) stratum+tcp://poolcore.bitcoinrh.org:3062
(3–4 GH/s) stratum+tcp://poolcore.bitcoinrh.org:3063
(5+ GH/s) stratum+tcp://poolcore.bitcoinrh.org:3064
Algo: x13User: your XRC receiving address (make sure you set 2 distinct addresses for each hashing board)
Pass: x
Extranonce: leave off Priority set to 0 and 1
Once pool stratum address and your wallet as user are set up you should see your miner mining against XRC pool. When miner is working the status column is green. The pool and miner are incorrectly configured now as status says “Dead” highlighted in red.

Instructions for mining XRC on BSOD pool

Pool link: bsod.pw/en/pool/dashboard/XRC/
Use this code for your miner: -a x13 -o stratum+tcp://pool.bsod.pw:2582 -u WALLET.rig
BSOD pool allows both solo and party mining.
For solo mining use code: -a x13 -o stratum+tcp://pool.bsod.pw:2582 -u WALLET.rig -p m=solo And for party mining use: -a x13 -o stratum+tcp://pool.bsod.pw:2582 -u WALLET.rig -p m=party.yourpassword
NOTICE: You can use us for North America and asia for Asia instead of euin your .bat file or config.
You can also use BSOD pool’s monitor app for Android and iOS.

Instructions for mining XRC on ZERGPOOL

Zergpool offers low fees (just 0.5%) and also SOLO and PARTY mining with no extra fees.
To mine XRC on Zergpool use this command lines for your miner:
Regular: -a x13 -o stratum+tcp://x13.mine.zergpool.com:3633 -u -p c=XRC,mc=XRC Solo: -a x13 -o stratum+tcp://x13.mine.zergpool.com:3633 -u -p c=XRC,mc=XRC,m=solo Party: -a x13 -o stratum+tcp://x13.mine.zergpool.com:3633 -u -p c=XRC,mc=XRC,m=party
Use your coin wallet address as username in mining software. Specify c=SYMBOL as password to identify payout wallet coin, and the same coin in mc=SYMBOL to specify mining coin.
For more information and support please visit http://zergpool.com
Notice that when there are more pools mining XRC in different geographic/availability locations choose the nearest to you as lowest priority and then add desirable fall back pool options in different geographic locations or pools. This is useful when one pool experiences issues, to fall back to different pool in Bitcoin Rhodium network.

Calculate your Bitcoin Rhodium mining profitability

WhatToMine: https://whattomine.com/coins/317-xrc-x13
CoinCalculators: https://www.coincalculators.io/coin/bitcoin-rhodium

Feel free to ask questions in Discord community. There are lots of helpful people around the world watching XRC 24x7.

Bitcoin Rhodium Dev Team
submitted by BitcoinRh to BitcoinRhodium [link] [comments]

[US-WA][H] 11-GPUs, My 2-in-1 Mobile Mining Rig [W] BTC/BCC/USD/PayPal

I have this posted on Craigslist at the moment, though I would be willing to ship as long as you're willing to piece it all back together once it all arrives, and pay for shipping lol.
I'll add the link so anybody can see photos, but I'll just copy/paste the entire listing below as well.
https://seattle.craigslist.org/see/sys/d/selling-11-gpu-mining-rig/6370381005.html
I'm selling my pride and joy of the last 4-6 months of my life, sadly I can't keep it in my apartment another day and have to hear my girlfriend nag about how much time I'm spending mining any longer.
This is really two separate rigs that I have combined into a single entity (see pictures for details).

RIG #1

Motherboard: Gigabyte GA-X99-Phoenix SLI CPU: 6th Gen. Intel Core i7-6800K (6-Core/12-Thread) (15M L3 Cache | 3.60 GHz) RAM: Corsair Vengeance 8GB DDR4 2400 MHz (x2 for a total of 16GB) Heatsink: Cooler Master Hyper 212 EVO (w/2 Fans) PSU: Corsair HX1000 1000W 80 Plus Platinum Grade Fully Modular GPU #1: MSI GTX 1060 Armor 6gb GDDR5 GPU #2: MSI GTX 1060 Armor 6gb GDDR5 GPU #3: MSI GTX 1060 Gaming X 6gb GDDR5 GPU #4: MSI GTX 1060 Gaming X 6gb GDDR5 GPU #5: EVGA GTX 1060 6gb FTW (Tri-Fan) Risers: Explomos Multi-Powered USB 3.0 (VER 008S) <----Newest Model

HDD: 2.5" Laptop SATA 7200rpm 1.0 TB HDD w/Windows 10 Pro

RIG #2

Motherboard: Asrock H110 Pro BTC+ (x13 PCIe Slots) CPU: 7th Gen. Intel Celeron Dual Core @ 2.60 GHz RAM: Corsair Vengeance 8GB DDR4 2400 MHz (x1 for a total of 8GB) PSU: Corsair HX1000 1000W 80 Plus Platinum Grade Fully Modular GPU #1: MSI GTX 1060 OCV1 Mining Optimized 6GB GDDR5 GPU #2: MSI GTX 1060 OCV1 Mining Optimized 6GB GDDR5 GPU #3: MSI GTX 1060 OCV1 Mining Optimized 6GB GDDR5 GPU #4: EVGA GTX 1060 SC Gaming 6GB GDDR5 GPU #5: XFX RX 480 8GB RS Hard Swap Edition (Custom BIOS Mod for 29-31 MH/s + Undervolted for Lower Power Draw) GPU #6: Red Devil RX 480 8GB (Tri-Fan) (Custom BIOS Mod for 29-31 MH/s + Undervolted for Lower Power Draw) Risers: Explomos Multi-Powered USB 3.0 (VER 008S) <----Newest Model

HDD: Western Digital 7200rpm 500gb 2.5" Laptop SATA HDD w/Windows 10 Pro

The features that set this rig apart from most others is the fact that it is 100% portable and easy to move. Its compact design makes for an easy-to-manage mining experience, doubly so with the fact that the entire rig is on wheels! From RIG #1 to RIG #2 I have connected an Ethernet cable; doing this I am able to create a Bridged Network Adapter and effectively enable a constant internet connection to RIG #2 from RIG #1 without ever having to do anything more than simply power each device on. Of course, you'll have to have some way to give internet access to RIG #1 for this to work properly, though this should come as no problem considering RIG #1 has built-in Wi-Fi access, as well as a second Ethernet port on the motherboard.
If you're wondering how much effort you'll have to put in from the time you buy it and get home, I'll say that this rig takes absolutely ZERO effort to install. The entire rig is ran headless, with Teamviewer installed onto both rigs, so you don't have to have anything plug into it except for the x2 power cords from each PSU, and an Ethernet cord from your router into RIG #1. That's literally it. 3 plugs, then connect to each rig with Teamviewer from a separate device (there's an app for that).
This rig can literally mine anything you want, I have a multitude of mining software already available on the device, and custom made batch files in each folder so literally all it takes is for you to decide which coin you want to mine, then double click a single file and start raking in the coins!
Here are a few hashrates that you can expect to get if you choose to utilize all 11 GPUs to a single coin:
ETHEREUM (Ethash Algorithm) - 240 MH/s ZCASH (Equihash Algorithm) - 3300 sol/s NICEHASH (Auto Profit Switcher Software) - $20+/day in Bitcoin (which is over $7000 if you didn't know!)
I'd be happy to help you get everything squared away, and would honestly just like to see this thing go to somebody that will appreciate its glory. I spent a LOT of time building this rig, and I'm sad to have to see it go, but my girlfriend is constantly bitching about it and I'm beginning to procrastinate homework these days because of it, so sadly it is time to see it go...
I have about 90% of the original boxes that the hardware came in when I purchased it, and I've only had it up and running for about a month total, so there is massive life left to be enjoyed with this guy. With the way the crypto is going (or at least Bitcoin), it is a wise investment to get into it now while you still can ;)
SERIOUS BUYERS ONLY!!!!!
You may contact me either by email via this Craigslist listing, or by phone @ show contact info .
I will accept cash, PayPal (in-person ONLY), or Bitcoin/Ethereum and other Cryptocurrencies as form of payment.
submitted by therealjayvi90 to MinerSwap [link] [comments]

Looking back, ASICs were bad for Doge.

Dogecoin mining used to be amazing. Miners all over the world building these rigs, connecting to this global network of computers coming together to support this crazy idea of a decentralized/distributed crypto currency based off of a Shiba Inu. Our stupid little dog coin actually had some value, which was enough to fuel this crazy passion of mining. Then the ASICs came. They took dogecoin mining away from the common man. How long has it been since anyone has been able to break even? The only ones who really mine are a few shibes with already outdated ASICs and the big guys. The big guys like GAW and ZEUS. We can no longer profitably mine with off the shelf parts. All of mining is at the mercy of a few corporations and the silicon they develop. We have turned from a global community of miners, to the whims of a big few. I used to be able to roll over in my sleep and hear the noise of my GPU fans, to feel the heat of 100% load. I would chuckle to myself that I was crazy enough to spend my hard earned money and research enough to build this crazy machine to support Doge. Those days have passed. No ASIC on the market for a while now has been able to even suggest breaking even, and No one can recommend buying one. The few corporations we put our trust with ASICs have now actually shifted their focus to cloud mining; Literally opposite in philosophy to decentralized mining. At any moment, your cloud mining provider could take your miner from you, and you couldn't stop them. But what about the x11 coins!? What will happen when ASICs come out for x11 coins, and then x13 coins? The main reason for the creation of litecoin was it was GPU profitable as the Bitcoin ASICs started rolling in. Will we mine and kill every coin on our destructive path of ASICs? Coin mining, to be truly successful as a long term strategy should be feasible with off the shelf computing parts, and not custom silicon thats useless once its outdated.
submitted by ibayibay1 to dogemining [link] [comments]

[GUIDE] How you can help decentralize the network using p2pool and rented hashing power.

Hey guys,
After seeing this ghash.io 51% drama play out for the second time I've decided to start contributing to the network using P2pool. I don't own any SHA256 mining hardware aside from a 330mh block erupter, so I started looking around for hashpower for rent that wouldn't cost me too much. I settled on using Betarigs and Nicehash, services that I already use to lease X13 hashpower on my GPU rigs. I found cheap hashing power on these services that would put me close to breaking even. So far the costs have been very small and I have put an average of 2TH on a local p2pool node. It's not much but every GH counts!
I've made instructions for renting on both websites. Be warned that P2Pool has a high variance due to their low hashrate, so ideally you would want to mine for a sustained period with a lower hashrate to balance it out.
The NiceHash method:
You will need:
  1. Create an account at NiceHash.com and add 0.01BTC on the deposit page.
  2. go to http://www.bitcoinx.com/profit/ and work out the amount of coins you will earn per terahash (0.0428 at the time of writing) This is the target price for your order. (please note that orders at a higher price take priority so matching the highest order guarantees that you will get your hashrate but is more expensive)
  3. Click the orders tab at the top of the page and create an order. Select SHA256 from the algorithm dropdown menu. The price per terahash should be slightly higher than the estimate you found on BitcoinX. Check which orders are going through on the front page and try to match that price. Limit the amount of mining power to 1 terahash per second to ensure your miner is going for as long as possible (this means there is less potential for variance).
  4. Find a p2pool node that is close to you. You can use http://p2pool-nodes.info/ for this. Find a node that is close to you and click on the url. Check the efficiency is around 100%. If it isn't, go back and find another node. If the node does fit the criteria you can proceed to the next step.
  5. Put the node URL (minus the http:// and port) into the pool address box on Nicehash. The port (usually 9332) should be put in the port box to the right.
  6. Put your BTC address in the user field and x in the password field. Double check to verify everything is correct and place the order.
You should soon see the hashrate of the p2pool node you are connected to go up and your address show up in the stats field. If this doesn't happen within 20 minutes, either edit your order to have a higher price per TH or wait for the higher priced orders to finish.
The Betarigs method
This method is cheaper than using Nicehash as you are renting hardware rather than raw hashrate, which you pay a 'convenience fee' for. This is not as straightforward but will cost you less and give you more choice of the rig you want to rent.
You will need:
  • Some Bitcoin
  • A P2Pool node to connect to (You can use http://p2pool-nodes.info/)
  • A Betarigs.com account (Sign up on their site for free)
  1. Sign up for a Betarigs account using the register link in the top right of the page and follow the steps to sign up.
  2. At the top left of the page, go to rent a rig and select SHA-256.
  3. Turn on results for all of the available rig sizes and hit search. You will see a list of rigs and their price per day, hashrate and price per TH on the right. The rigs displayed first are the cheapest per TH, placing them closer to breaking even with mining profit (while helping the network. Sweet!)
  4. Find a rig with a low price per TH that is within your price range. You can pick up an Antminer S1 for around 0.008 per 24h, often cheaper. When you've found a rig you would like to rent, click the green 'Rent Rig!' button to the right of the result.
  5. Double check that the information is correct and confirm that you would like to rent the rig. You will be taken to a page with fields for your pool, user and password.
  6. Find a p2pool node that is close to you. You can use http://p2pool-nodes.info/ for this. Find a node that is close to you and click on the url. Check the node's efficiency is close to or above 100%. If it isn't, go back and find another node. If the node does fit the criteria you can proceed to the next step.
  7. Put the node URL (minus the http://) into the pool address box on Nicehash. The port should go on the end of the url in this format - url:port
  8. Put your BTC address in the user field and x in the password field. Double check to verify everything is correct and click 'update the target mining pool'.
  9. Send the exact amount of BTC specified by Betarigs to the address displayed at the top of the control panel. After one confirmation, the rig will start to mine and you will be able to check your status on the p2pool node page soon!
I have around 1.5 TH (!1.2TH from NiceHash, ~300GH from Betarigs) pointed at a local p2pool node, 2-400gh of which should last for 3 days to 1 week. I decided to do this to decentralize the network rather than for profit although I do seem to be breaking even so far. P2Pool varies wildly so a lot of it is down to luck. I may add a picture tutorial if this picks up enough interest, as I aim to make this guide as noob friendly as possible. Please reply with any additions and I will add them to the OP.
Thanks for reading and keep hashing! :)
submitted by ch33s3mast3r to Bitcoin [link] [comments]

Instead of Merge-Mining Scrypt, why don't we switch to a new PoW algo like X15 or X17 for Dogecoin?

-langer_hans: why don't we switch to a new algo like X15 or X17. There are no successful coins using it so we won't be competing for Scrypt miners, it runs on nvidia and AMD GPUs through sgminer 5, uses 45% less electricity than Scrypt (on GPUs) and outputs 45% less heat. Merge mining with Litecoin might increase hashrate pointlessly and would also most likely drop the price to 0. We need to be independent, preferably GPU mined and not competing for other miners. There are no competing coins for X15 or X17 right now.
http://getpimp.org/community/blog/144-what-are-all-these-x11,-x13,-x15-algorithms-made-of.html
I forgot to mention, this would bring back hundreds of GH/s of GPU miners that are now mostly pointlessly mining random pump and dump coins on multipools for Bitcoin or lease their rigs out for Bitcoin to launch new PoW/PoS coins that die within a few weeks as soon as they go on the exchange. Aka GPU miners have nowhere to go to mine something meaningful besides X11/Darkcoin (and their hashrate and profitability is at break-even/loss category already).
Doing X15 or X17 for Dogecoin would create a new sustaineable mining market for GPU miners that already have millions of $ invested in GPU farms and are eager to find something useful to mine as Scrypt Asics pushed them out.
http://www.reddit.com/dogecoin/comments/2b11po/what_is_dev_team_going_do_about_dogecoins/cj19fkh?context=3
submitted by blockchaintechnology to dogecoindev [link] [comments]

The Serious Problem with a "Easy Mining Algorithm" such as X11

A lot of people lately have been arguing for an easier algorithm, as its getting to summer as their rigs run so hot - and that with X11 / X13 / Some other algo - their rigs are X% cooler. There is a serious problem with this.
In order for a PoW network to be secure, the mining equipment needs to be utilised as efficiently as possible - as if it isn't, then it makes it even easier to 51% control a network by making an efficient miner for the algorithm. This is why ASICs exist for Bitcoin, and ultimately Scrypt now - they are more efficient at doing the work than GPUs.
This is also the serious issue with X11 - There is quite a bit of evidence to support the fact of the existence of FPGAs for X11 now that can mine the algorithm at far better efficiencies than CPU/GPUs - if this is the case, then X11 is a very insecure algorithm, until sufficient people can purchase/make/build FPGAs to make sure that it is distributed/decentralised.
Any coin built on such an insecure foundation, stands the very high risk of having its network subverted with far less effort by an efficient miner.
This is the reason that "easy mining algorithms" are not good, and why vertcoin if/when it does adapt to a new algorithm - will need to pick again a sufficiently hard working heat-producing gpu maxing out algorithm, to ensure it stays secure.
submitted by darrenturn90 to vertcoin [link] [comments]

X11 and other algo cloud hashing contract

{Wasn't sure if this is allowed, but I didnt see anything in the side bar, and I assume those interested in alternative currency markets may also be interested in mining some coins, and have flexibility over the mining of those coins.}
Cointersect, a Saint Louis, MO based altcoin mining company is selling annual hashing contracts using the x11 algorithm, with plans to add x13, x15, n-scrypt and mgroestl.
Our website is www.cointersect.com. We are located downtown, using professional racks, cooling, monitoring systems, and fiberoptic internet with redundancy.
We currently have about ~250 m/hs to sell. The pricing below is in USD, but we will accept Litecoin, Bitcoin, Darkcoin, or Bluecoin alongside cash or Paypal. I cannot find another company/website that currently offers x11 for annual contracts. If someone locates one, please post below!
Rates
We use the MiningRigRentals interface so you can login to control your miners, rent to other miners, speculate with different coins etc. We will provide you with your login information.
In addition to annual contracts, we will also do monthly contracts.
Rates
Again, we will give you access to a miningrigrentals account for you to go ahead and point your miners wherever you want them to be!
Please feel free to ask any questions.
submitted by lmaonade80 to CryptoMarkets [link] [comments]

X11 and more Cloud Hashing Contracts

Want to mine a coin but don't wanna deal with the hardware? Cointersect, a Saint Louis, MO based altcoin mining company is selling annual hashing contracts using the x11 algorithm, with plans to add x13, x15, n-scrypt and myriad-groestl. If there is any interest in any of these other algorithms now, I will be happy to work with you. In addition, if there is interest in monthly mining contracts, I will also work with you.
Our website is www.cointersect.com. There are some pictures of standalone rigs as we also build them for clients and install them in their homes. Cointersect's main server is located downtown STL, using professional racks, cooling, monitoring systems, and fiberoptic internet with redundancy.
We currently have about ~250 m/hs and expanding to sell. The pricing below is in USD, but we will accept Litecoin, Bitcoin, Darkcoin, or Bluecoin alongside cash or Paypal. I cannot find another company/website that currently offers x11 for annual contracts, so I thought I would offer up my services.
Rates
We use the MiningRigRentals interface so you can login to control your miners, rent to other miners, speculate with different coins etc. We will provide you with your login information.
Please feel free to ask any questions.
submitted by lmaonade80 to CryptoCurrency [link] [comments]

X11 Cloud Hashing Contracts

Cointersect, a Saint Louis, MO based altcoin mining company is selling annual hashing contracts using the x11 algorithm, with plans to add x13, x15, n-scrypt and myriad-groestl. If there is any interest in any of these other algorithms now, I will be happy to work with you. In addition, if there is interest in monthly mining contracts, I will also work with you.
Our website is www.cointersect.com. There are some pictures of standalone rigs as we also build them for clients and install them in their homes. Cointersect's main server is located downtown STL, using professional racks, cooling, monitoring systems, and fiberoptic internet with redundancy.
We currently have about ~250 m/hs and expanding to sell. The pricing below is in USD, but we will accept Litecoin, Bitcoin, Darkcoin, or Bluecoin alongside cash or Paypal. I cannot find another company/website that currently offers x11 for annual contracts, so I thought I would offer up my services.
Rates
16 m/hs — $2,000/year
20 m/hs — $2,400/year
40 m/hs — $4,600/year
80 m/hs — $9,000/year
We use the MiningRigRentals interface so you can login to control your miners, rent to other miners, speculate with different coins etc. We will provide you with your login information.
In addition to annual contracts, we will also do monthly contracts.
Rates
16 m/hs — $200
20 m/hs — $240
40 m/hs — $450
80 m/hs — $800
Again, we will give you access to a miningrigrentals account for you to go ahead and point your miners wherever you want them to be!
Please feel free to ask any questions.
submitted by lmaonade80 to altcoinmining [link] [comments]

wooden mining rig frame build bitcoin What Do YOU Need to MINE ONE BITCOIN In 2020?! Mining Rigs Cooling Solution Bitcoin Mining Rig - 24 Machine Setup - 48Gh MSI AERO RX 560 4GB X13 MINING RIG

List of known Bitcoin Diamond pools (BCD) X13 PoW algorithm. Live network hashrate distribution, pool fees & minimum payment comparison. Mining Pools & Block Explorer X13 mining calculator, pools, and coins. 2.2595 TH/s network hashrate and 8 coins. Check profitability for ASICs. For the purposes of this guide, we will be using a mining pool. To mine Bitcoin Diamond (BCD), you will need: A mining rig/contract; A wallet to store and manage your funds; A miner that is compatible with the X13-BCD algorithm; An uninterrupted power supply; Mining Rig Step One: Connect your hardware. MiningRigRentals.com focuses on providing a top level crypto mining rig hashpower rental service. The focus is to unite renters and rig owners for the purpose of exchanging Crypto-currency for mining time. A secure, safe, better alternative to similar services online. Join our community today! With the official sph-sgminer we were getting around 1.5 MHS mining MaruCoin (X13 coin) and with the windows binary we have compiled (source here) we are able to get up to about 2.65 MHS on a Radeon R9 280X GPU as you can see on the screenshot. Just edit the included config file that is already setup for X13 mining and you are ready to mine X13

[index] [21826] [14032] [8264] [31014] [25041] [27146] [18194] [1120] [19753] [31230]

wooden mining rig frame build bitcoin

I built a wooden mining rig frame for free with scrap wood. A nice little DIY project to help keep my cards cool as i mine for that sweet crypto. This setup currently only mines zcash and bitcoin ... bitcoin, bitcoin generator, bitcoin mining, free bitcoin mining, free bitcoin, free bitcoin generator, btc generator, free btc, mining, cryptocurrency, bitcoin generator 2020, bitcoin miner, earn ... This video is unavailable. Watch Queue Queue. Watch Queue Queue Here is the followup to my custom HVAC cooling solution video. Here I briefly show the insides of our mining rig setup. How to mine Bitcoin is a hot topic, especially with the Bitcoin BTC block reward halving coming up which will reduce the Bitcoins mined each day from 1,800 coins to 900 BTC coins.

Flag Counter