Best Bitcoin Mining Software - 2020 Edition | CaptainAltcoin

How To Mine Doge with Ubuntu 13.10. (Part 1, for AMD Graphics Cards)

I feel the community really needs a resource like this. Because if I had a Doge for every-time taught a newbie how to Mine on Ubuntu, I would be a very rich doge!
EDIT: Sorry if it looks funny, Reddit doesn't like the numbers I put in for some reason.
If you have Ubuntu you have likely not upgraded because you think you cant mine on 13.10, and while that has been true in the past, a few people have got it figured out. So feel free to upgrade. If you are not on Ubuntu, Seriously you should consider using it. Even if its just on an older desktop.
Alright, so lets get a few things clear, I am assuming that you just FRESHLY installed Ubuntu 13.10 x64 on your system. I am assuming that you have no drivers, and no miners. You will need at least a key board and a mouse. The guide will be done in several parts, this first part is for most AMD Graphics cards. If you have an Nvidia, or just want to mine with your CPU, please check back later for those guides!
When reading this guide, please remember that as I give you commands to type into the terminal, Anything between { and} must be included. Do not copy and paste the {}.
Lets get started, If you have not already done so, Install Ubuntu 13.10 64Bit From Here (
*1. Lets start by making sure you are up to date. Open up the terminal and enter this:
{sudo apt-get update && sudo apt-get upgrade} 
Let that run for a bit.
*2. Once that has finished we are going to download some applications we will need:
{sudo apt-get install dh-make dh-modaliases execstack libxrandr2 libice6 libsm6 libfontconfig1 libxi6 libxcursor1 libgl1-mesa-glx libxinerama1 libqtgui4} 
*3. Once that has run its course we are going to install the ssh server. Remember this command is going to make your computer shut down. While it is shut down, carefully install your graphics cards. If you don't have any experience with this, I suggest you 3 minutes to watch this guide, because failure to install a graphics card the right way can destroy it.
{sudo apt-get install openssh-server sudo shutdown now} 
*4.Install your Card(s) and turn the computer back on.
*5. Make a new folder called "AMD DRIVERS123" inside of your download folder. Downoad the following 3 things into that folder. (1. AMD Drivers: (2. AMD APP SDK: (3. AMD ADL SDK:
*6. Ok, now we need to unzip and compile those drivers. So, open a terminal my right clicking inside of "AMD DRIVERS123". The enter this:
{unzip amd-catalyst*.zip chmod +x amd-catalyst*.run} {sudo ./amd-catalyst*.run --buildpkg Ubuntu/saucy} 
*7. Now we need to install the drivers. Enter the code exactly as you see it, don't worry, the first command will fail, we are expecting it too.
{sudo dpkg -i fglrx*.deb} {sudo apt-get -f install} {sudo dpkg -i fglrx*.deb} {sudo reboot} 
Your computer should now reboot.
(If this failed, you probibly need to remove the old drivers. Do this
{cd /etc/default sudo pico grub} 
Change the line:
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash nomodeset" 
Now save by pressing [CTRL+x]
{sudo update-grub} this will make the change perminent. {sudo reboot -n} Reboot with new settings. Once it starts back up try installing the new drivers again.) 
*8.GREAT! You are really on a roll! Now we need to update AtiConfig
{sudo aticonfig --initial --adapter=all} 
*9.Time to install the APP ADK:
{tar xvf AMD-APP-SDK*.tgz} {sudo ./} {sudo reboot} 
*10. WOOT! You are so close to diggin that sweet Doge!! Its time to download CGMiner. IMPORTANT NOTE! You need to get CGminer 3.7, IT IS THE ONLY ONE THAT WILL WORK. Do not get any older or newer, Just this. :
{sudo apt-get install git unzip git clone -b 3.7} 
*11. Ok, now go back to "AMD DRIVERS123", Unzip AMD SDL SDK 6.0. Once you have it unzipped, go the file called "include", open it up, copy everything inside, then go find CGminer. Copy these files into the CGminer file called ADL_SDK.
*12. To install CGminer, we are going to need a few things. Get all of these.
{sudo apt-get install build-essential autoconf libtool libcurl4-openssl-dev libncurses5-dev pkg-config libudev-dev} 
*13. Lets go ahead and compile CGminer.
{cd cgminer} {./} 
*14. Ok, when you did that, it told you GPU was not supported, time to fix it.
{./configure --enable-opencl --enable-scrypt} 
(if you did it right you should now get this: OpenCL...............: FOUND. GPU mining support enabled scrypt...............: Enabled ADL..................: SDK found, GPU monitoring support enabled)
*15. If everything has been good so far then
*16. MATHEMATICAL! Now lets get it set up to run a test.
{nano} {!/bin/bash export DISPLAY=:0 export GPU_MAX_ALLOC_PERCENT=100 export GPU_USE_SYNC_OBJECTS=1} {./cgminer -n} 
*17. Now save by hitting [Control+x][y][Enter]
*18.Lastly lets CHmod
(If your output looks like this your ready to go!!! CL Platform 0 vendor: Advanced Micro Devices, Inc. CL Platform 0 name: AMD Accelerated Parallel Processing CL Platform 0 version: OpenCL 1.2 AMD-APP (1214.3) Platform 0 devices: 1 0 Tahiti GPU 0 AMD Radeon HD 7900 Series hardware monitoring enabled 1 GPU devices max detected)
*20. Excellent! Now we have it installed, its time to pick 2-3 pools, and get accounts set up at each of them. I currently use These 2, and If I find another I like I'll update. If you have a really awesome pool you would like me to include on the list, feel free to message me.
Pools: (great community, server not super stable, but they have a chat. I hang out here a lot under the handle 'StrongBad' feel free to stop buy and ask questions) (Super stable pool, Great contests, super friendly, and they pay your miner a bonus if you find the block!)
Choose your pools, go to their sites and sign up. VERY IMPORTANT!!! Use different usernames and passwords for every mining site. If one site gets hacked, you don't want to give them a way to steal everything!!!!! Don't worry about the worker names and passwords being unique or complex tho, the most they can do with this is mine for you.
*21. Ok, now go to the CGminer folder, and open up a Terminal Window.
{sudo ./cgminer} 
This should start ./cgminer up with some really basic settings, and not pointed at any pool. Lets fix that: First press [p] to go to pool settings Now [A] and enter the information for the 1st pool. For instance if you are signing on for dogehouse: (Input server details: stratum+tcp:// Username: 'yourusername.workername password: 'yourpassword') If you got no errors, you did it right! Your miner should now connect and start to mine very slowly.
Now, do the same thing for all your other pools. the reason we do this is because Doge Coin pools are constantly being DDoS attacked, and this way your worker automatically switches over to a good pool if one go's down.
*22. time to save your current settings press [Enter] to get back out to the main menu, then [s] to bring up settings. Now press [W] to write a Config file. Name it DogeCoin.conf, and make sure to save it in the location it directs you too.
*23.OK! So, now we have everything set up to its basics. What you need to do now is sit down, and fine tune your Card(s). Its really early in the morning, and I need to get some sleep, I will add more on how to tune your card tomorrow in another post, and link it HERE:
Or, I will help you find the best configuration for your card(s). However as this is quite a bit of work, I do charge a small fee. Contact me with your card(s) information and I will get back to you right away. I generally let you decide how much to pay me.
This is my first ever guide on reddit! If you enjoyed it, or if it helped you please remember to upvote! I am going to start doing an educational YouTube series about Bitcoin, and will likely be doing a side program about Doge, if I find time and funding!! You can find that here: All tips are appreciated! DPTwcQreASwzt6TeWBWFb6Kz9ZU5Sezvr9 If you have any Questions, feel free to ask, I will get back to you ASAP.
Happy Digging everybody!
submitted by Sonofchange to Dogecoinmining [link] [comments]

Linux headless setup

I'm setting up a mining rig using 3-7950's, and have ran into a little bit of a road block. I've seen a few guides using xubuntu 12.10, but none with xubuntu 13.04.
darth_bunny's guide
cryptobadger's guide
gentoo (bitcoin)
I've tried the first 2 ways on fresh images, but for some reason X never starts...
aticonfig --adapter=0 --od-getclocks ERROR - X needs to be running to perform AMD Overdrive(TM) commands 
Following the darth_bunny's guide way I built to 13.04 instead of 12.10
./ --buildpkg Ubuntu/raring 
On a side note, whenever I plug the ATI cards in, video (connected to onboard), does not output. I'm guessing this is because the ATI cards are primary? It didn't bother me as I ssh in anyway.
I also have some missing lib's when trying to run cgminer, but that is something to worry about later.
Has anyone solved this on 13.04, or should I just downgrade to 12.10?
submitted by atrueresistance to litecoinmining [link] [comments]

Ubuntu Gnome hates me

Before I start - a quick overview of my setup:
ATI Radeon HD6950 3 monitors - two on Display Port - one on HDMI by way of a mini display port adapter
The issue:
I can install Ubuntu Gnome without any major issue.
However, the fan on the gfx card is significantly louder than in Windows. The fan is running as loud as it does in Windows when I'm gaming. However, it's definitely not running at full speed as I ran some bitcoin mining thing on it once, and then it was truly running at full pelt - full on concorde take-off noise.
So, my searches lead to me believe ATI cards and Gnome are not friends. However, most of these posts (google searches bring up many forums / message boards / etc) end in 2012, when it looks like this issue was sorted.
I have tried Ubuntu Gnome 13.10 and 14.04.
Aside from the fan noise, I also find that my display settings aren't retained on reboot - such as the middle becomes the right, the right becomes the left, and the left becomes the middle.
Also, many weird things (I have no idea what, but plenty of messages with OOPS in them) pop up on log in.
And lastly, I have tried installing the Radeon driver from the ATI official site. When I do this, the desktop crashes to console after the mandatory installation reboot, and running startx etc just bombs back to console with a nasty error message (don't have that to hand as typing this from windows dual boot currently).
I have read you can use some unofficial radeon drivers, but that they manually stop the fan (?) and can lead to gfx cards burning out etc due to heat. Is there any truth in this? And where might I find / how might I install the unofficial drivers?
I really, really want to use Ubuntu Gnome on this PC as - as a software developer - it's so much more efficient, after having had it as my home desktop now for a good few weeks.
Any help gratefully appreciated - if I had any hair, it would have all been pulled out by now!
submitted by chris_a6software to gnome [link] [comments]

Bitcoin Mining on Ubuntu Graft Mining Ubuntu+AMD+XMR Stak How to Bitcoin Miner with Ubuntu VPS - Setup Nicehash Miner via Ubuntu VPS How to Install Ubuntu 16.04 & AMDGPU-PRO drivers for Miners with RX400 series GPU's How to start mining Vertcoin with AMD cards on Linux

Provided by: bfgminer_5.2.0+dfsg-1build1_amd64 NAME bfgminer - multi-threaded multi-pool ASIC, FPGA, GPU and CPU bitcoin miner. SYNOPSIS bfgminer DESCRIPTION multi-threaded multi-pool ASIC, FPGA, GPU and CPU bitcoin miner. Bitcoin mining on Ubuntu isn't recommended. Since graphics card makers cant come to an agreement about driver installations that actually work... Your Ubuntu machine cant process the bit coins with Ubuntu generic drivers. Linux will never take place of windows without over coming graphic cards and sound driver problems. Simple as that. I'm setting up a mining rig using 3-7950's, and have ran into a little bit of a road block. I've seen a few guides using xubuntu 12.10, but none with xubuntu 13.04. darth_bunny's guide. cryptobadger's guide. gentoo (bitcoin) I've tried the first 2 ways on fresh images, but for some reason X never starts... Ubuntu 64 bit with graphic drivers: These steps demonstrate how to install p2pool and cgminer on a computer with ubuntu. To work correctly, cgminer needs the 64bit version of ubuntu. And if you use an ATI graphics card, it is also necessary that the fglrx proprietary drivers are installed to take advantage of its calculation strenght. The mining software is compatible with GPU mining hardware and runs on Mac, but if you have any of the current Nvidia drivers or an ATI Stream SDK 2.1, it’ll run on any operating system. You also have the option of either doing solo or pool mining. BFGMiner. BFGMiner is a software for mining coins which use SHA256 algorithm.

[index] [7591] [18055] [3786] [21404] [11908] [21957] [25269] [5659] [2818] [14511]

Bitcoin Mining on Ubuntu

Mining Free for Lifetime ! Bitcoin Monero Zcash etc using Azure Ubuntu VPS 100% working 2018 - Duration: 6:07. Dragon Stone Creations 4,814 views This is a tutorial to mine cryptocurrency using old Nvidia GPUs which are GTS250 and GT8800. These GPUs only supports up to Nvidia Driver 340, cuda toolkit 6.5, and compute capability 1.1 (refer ... Bitcoin Mining on Ubuntu 18.10 - Bitcoin Mining Software 2019 - Duration: 24:00. Bitcoin Mining Software 2019 8,610 views. 24:00. How to Setup CGMiner for Ubuntu (Gridseed Support) - Duration ... How to mining Bitcoin with your Ubuntu VPS? Earn 0.0001 BTC per VPS, if you have 10 VPS, you will earn 0.001 BTC per day (~2.5 USD), if you have a lot of VPS, you will earn more BTC per day. How to Install Ubuntu 16.04 & AMDGPU-PRO drivers for Miners with RX400 series cards. Once you finish installing everything in this video you are set to install the rest of what you need for ...

Flag Counter