client - Where is the data folder for Bitcoin-Qt

Groestlcoin 6th Anniversary Release

Introduction

Dear Groestlers, it goes without saying that 2020 has been a difficult time for millions of people worldwide. The groestlcoin team would like to take this opportunity to wish everyone our best to everyone coping with the direct and indirect effects of COVID-19. Let it bring out the best in us all and show that collectively, we can conquer anything.
The centralised banks and our national governments are facing unprecedented times with interest rates worldwide dropping to record lows in places. Rest assured that this can only strengthen the fundamentals of all decentralised cryptocurrencies and the vision that was seeded with Satoshi's Bitcoin whitepaper over 10 years ago. Despite everything that has been thrown at us this year, the show must go on and the team will still progress and advance to continue the momentum that we have developed over the past 6 years.
In addition to this, we'd like to remind you all that this is Groestlcoin's 6th Birthday release! In terms of price there have been some crazy highs and lows over the years (with highs of around $2.60 and lows of $0.000077!), but in terms of value– Groestlcoin just keeps getting more valuable! In these uncertain times, one thing remains clear – Groestlcoin will keep going and keep innovating regardless. On with what has been worked on and completed over the past few months.

UPDATED - Groestlcoin Core 2.18.2

This is a major release of Groestlcoin Core with many protocol level improvements and code optimizations, featuring the technical equivalent of Bitcoin v0.18.2 but with Groestlcoin-specific patches. On a general level, most of what is new is a new 'Groestlcoin-wallet' tool which is now distributed alongside Groestlcoin Core's other executables.
NOTE: The 'Account' API has been removed from this version which was typically used in some tip bots. Please ensure you check the release notes from 2.17.2 for details on replacing this functionality.

How to Upgrade?

Windows
If you are running an older version, shut it down. Wait until it has completely shut down (which might take a few minutes for older versions), then run the installer.
OSX
If you are running an older version, shut it down. Wait until it has completely shut down (which might take a few minutes for older versions), run the dmg and drag Groestlcoin Core to Applications.
Ubuntu
http://groestlcoin.org/forum/index.php?topic=441.0

Other Linux

http://groestlcoin.org/forum/index.php?topic=97.0

Download

Download the Windows Installer (64 bit) here
Download the Windows Installer (32 bit) here
Download the Windows binaries (64 bit) here
Download the Windows binaries (32 bit) here
Download the OSX Installer here
Download the OSX binaries here
Download the Linux binaries (64 bit) here
Download the Linux binaries (32 bit) here
Download the ARM Linux binaries (64 bit) here
Download the ARM Linux binaries (32 bit) here

Source

ALL NEW - Groestlcoin Moonshine iOS/Android Wallet

Built with React Native, Moonshine utilizes Electrum-GRS's JSON-RPC methods to interact with the Groestlcoin network.
GRS Moonshine's intended use is as a hot wallet. Meaning, your keys are only as safe as the device you install this wallet on. As with any hot wallet, please ensure that you keep only a small, responsible amount of Groestlcoin on it at any given time.

Features

Download

iOS
Android

Source

ALL NEW! – HODL GRS Android Wallet

HODL GRS connects directly to the Groestlcoin network using SPV mode and doesn't rely on servers that can be hacked or disabled.
HODL GRS utilizes AES hardware encryption, app sandboxing, and the latest security features to protect users from malware, browser security holes, and even physical theft. Private keys are stored only in the secure enclave of the user's phone, inaccessible to anyone other than the user.
Simplicity and ease-of-use is the core design principle of HODL GRS. A simple recovery phrase (which we call a Backup Recovery Key) is all that is needed to restore the user's wallet if they ever lose or replace their device. HODL GRS is deterministic, which means the user's balance and transaction history can be recovered just from the backup recovery key.

Features

Download

Main Release (Main Net)
Testnet Release

Source

ALL NEW! – GroestlcoinSeed Savior

Groestlcoin Seed Savior is a tool for recovering BIP39 seed phrases.
This tool is meant to help users with recovering a slightly incorrect Groestlcoin mnemonic phrase (AKA backup or seed). You can enter an existing BIP39 mnemonic and get derived addresses in various formats.
To find out if one of the suggested addresses is the right one, you can click on the suggested address to check the address' transaction history on a block explorer.

Features

Live Version (Not Recommended)

https://www.groestlcoin.org/recovery/

Download

https://github.com/Groestlcoin/mnemonic-recovery/archive/master.zip

Source

ALL NEW! – Vanity Search Vanity Address Generator

NOTE: NVidia GPU or any CPU only. AMD graphics cards will not work with this address generator.
VanitySearch is a command-line Segwit-capable vanity Groestlcoin address generator. Add unique flair when you tell people to send Groestlcoin. Alternatively, VanitySearch can be used to generate random addresses offline.
If you're tired of the random, cryptic addresses generated by regular groestlcoin clients, then VanitySearch is the right choice for you to create a more personalized address.
VanitySearch is a groestlcoin address prefix finder. If you want to generate safe private keys, use the -s option to enter your passphrase which will be used for generating a base key as for BIP38 standard (VanitySearch.exe -s "My PassPhrase" FXPref). You can also use VanitySearch.exe -ps "My PassPhrase" which will add a crypto secure seed to your passphrase.
VanitySearch may not compute a good grid size for your GPU, so try different values using -g option in order to get the best performances. If you want to use GPUs and CPUs together, you may have best performances by keeping one CPU core for handling GPU(s)/CPU exchanges (use -t option to set the number of CPU threads).

Features

Usage

https://github.com/Groestlcoin/VanitySearch#usage

Download

Source

ALL NEW! – Groestlcoin EasyVanity 2020

Groestlcoin EasyVanity 2020 is a windows app built from the ground-up and makes it easier than ever before to create your very own bespoke bech32 address(es) when whilst not connected to the internet.
If you're tired of the random, cryptic bech32 addresses generated by regular Groestlcoin clients, then Groestlcoin EasyVanity2020 is the right choice for you to create a more personalised bech32 address. This 2020 version uses the new VanitySearch to generate not only legacy addresses (F prefix) but also Bech32 addresses (grs1 prefix).

Features

Download

Source

Remastered! – Groestlcoin WPF Desktop Wallet (v2.19.0.18)

Groestlcoin WPF is an alternative full node client with optional lightweight 'thin-client' mode based on WPF. Windows Presentation Foundation (WPF) is one of Microsoft's latest approaches to a GUI framework, used with the .NET framework. Its main advantages over the original Groestlcoin client include support for exporting blockchain.dat and including a lite wallet mode.
This wallet was previously deprecated but has been brought back to life with modern standards.

Features

Remastered Improvements

Download

Source

ALL NEW! – BIP39 Key Tool

Groestlcoin BIP39 Key Tool is a GUI interface for generating Groestlcoin public and private keys. It is a standalone tool which can be used offline.

Features

Download

Windows
Linux :
 pip3 install -r requirements.txt python3 bip39\_gui.py 

Source

ALL NEW! – Electrum Personal Server

Groestlcoin Electrum Personal Server aims to make using Electrum Groestlcoin wallet more secure and more private. It makes it easy to connect your Electrum-GRS wallet to your own full node.
It is an implementation of the Electrum-grs server protocol which fulfils the specific need of using the Electrum-grs wallet backed by a full node, but without the heavyweight server backend, for a single user. It allows the user to benefit from all Groestlcoin Core's resource-saving features like pruning, blocks only and disabled txindex. All Electrum-GRS's feature-richness like hardware wallet integration, multi-signature wallets, offline signing, seed recovery phrases, coin control and so on can still be used, but connected only to the user's own full node.
Full node wallets are important in Groestlcoin because they are a big part of what makes the system be trust-less. No longer do people have to trust a financial institution like a bank or PayPal, they can run software on their own computers. If Groestlcoin is digital gold, then a full node wallet is your own personal goldsmith who checks for you that received payments are genuine.
Full node wallets are also important for privacy. Using Electrum-GRS under default configuration requires it to send (hashes of) all your Groestlcoin addresses to some server. That server can then easily spy on your transactions. Full node wallets like Groestlcoin Electrum Personal Server would download the entire blockchain and scan it for the user's own addresses, and therefore don't reveal to anyone else which Groestlcoin addresses they are interested in.
Groestlcoin Electrum Personal Server can also broadcast transactions through Tor which improves privacy by resisting traffic analysis for broadcasted transactions which can link the IP address of the user to the transaction. If enabled this would happen transparently whenever the user simply clicks "Send" on a transaction in Electrum-grs wallet.
Note: Currently Groestlcoin Electrum Personal Server can only accept one connection at a time.

Features

Download

Windows
Linux / OSX (Instructions)

Source

UPDATED – Android Wallet 7.38.1 - Main Net + Test Net

The app allows you to send and receive Groestlcoin on your device using QR codes and URI links.
When using this app, please back up your wallet and email them to yourself! This will save your wallet in a password protected file. Then your coins can be retrieved even if you lose your phone.

Changes

Download

Main Net
Main Net (FDroid)
Test Net

Source

UPDATED – Groestlcoin Sentinel 3.5.06 (Android)

Groestlcoin Sentinel is a great solution for anyone who wants the convenience and utility of a hot wallet for receiving payments directly into their cold storage (or hardware wallets).
Sentinel accepts XPUB's, YPUB'S, ZPUB's and individual Groestlcoin address. Once added you will be able to view balances, view transactions, and (in the case of XPUB's, YPUB's and ZPUB's) deterministically generate addresses for that wallet.
Groestlcoin Sentinel is a fork of Groestlcoin Samourai Wallet with all spending and transaction building code removed.

Changes

Download

Source

UPDATED – P2Pool Test Net

Changes

Download

Pre-Hosted Testnet P2Pool is available via http://testp2pool.groestlcoin.org:21330/static/

Source

submitted by Yokomoko_Saleen to groestlcoin [link] [comments]

(Updated) [Staking] Reddcoin Core client GUI wallet on a Raspberry Pi Model 3B

Intro

This thread is an update to my first Reddcoin staking tutorial that was written 7 months ago.
 
The reason for the update
My Reddcoin Core software crashed and became unusable. My Raspberry Pi 3B would lag and freeze, I couldn't stake anymore.
 
Instead of just redoing everything the same way, I wanted to see if I could improve on 3 points:
 
The updates
 
If you would like to tip me
Writing a tutorial like this takes time and effort; tips are appreciated. My Reddcoin address: RqvdnNX5MTam855Y2Vudv7yVgtXdcYaQAW.
     

Overview

 

Steps

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
     

Video

https://www.youtube.com/watch?v=Snr5e8bzftI
This video shows how long it takes to start Reddcoin Core.   TL;DR:
     

Extra

Backup
Backup your wallet to prevent losing the RDDs in your wallet! There are two methods to backup, do both. Make new backups if you create a new receiving address!
 
 
   
Boot with only 1 USB drive plugged in:
Make sure only the USB drive (with the swap partition and data partition) is plugged in when you boot up your Raspberry Pi. This to make sure the swap partition (/dev/sda1) is recognized correctly.   If you boot up with multiple USB drives, Lubuntu might see the USB drive with the swap partition as the second drive (instead of the first drive), and ignore the 2 GB swap partition. If this happens, starting Reddcoin can render the Raspberry Pi unresponsive.
   
Connection issues If you have issues syncing the blockchain because you have 0 network connections, please follow the instructions in this thread.
   
Start Reddcoin Core easier
Run a shell script (.sh file), so you can start Reddcoin just by double clicking on an icon on your Desktop.
   
Minimization options
Adjust minimization options, so you can safely press on the X button (the close/exit button on the upper right corner).
   
RealVNC VNC Viewer (client) and VNC Connect (server): To remote connect to the Raspberry Pi, I use VNC Viewer ad VNC Connect from RealVNC.
 
   
Chromium as browser: The updates break Firefox, the browser crashes when you try to run it. Install another browser, Chromium, to solve this issue.
   
Updates / Upgrades
If Software Updater shows up and tells you that there is updated software available, do not install the updates using Software Updater. Use LXTerminal to update Lubuntu.  
     

Credits:

   
Credits in previous tutorial:
submitted by Yavuz_Selim to reddCoin [link] [comments]

[Staking] Reddcoin Core client GUI wallet on a Raspberry Pi Model 3B

This tutorial has been updated: https://www.reddit.com/reddCoin/comments/a0wn1v/updated_staking_reddcoin_core_client_gui_wallet/.
   

Intro

I want to stake Reddcoins on my Raspberry Pi, but there is no easy to install package for the Reddcoin Core client. I found some tutorials (mentioned at the bottom, under 'credits'), but I still struggled to get the result I wanted. It took some small adjustments, but I got the GUI Wallet of Reddcoin Core working on my Raspberry Pi Model 3B. See the steps below. :).
 
If you have any questions or comments, please post a comment in this thread, so others can also benefit from it.
 
If you would like to tip me: RqvdnNX5MTam855Y2Vudv7yVgtXdcYaQAW.
   
Even though Raspbian is the primary OS for the Raspberry Pi, it seems that it's not possible to build and compile the Reddcoin wallet software for Raspbian Stretch. However, I got the wallet compiled using Ubuntu MATE.
     

Overview

     

Steps

 
 
 
 
 
 
 
 
 
 
 
 
 
 
     

Extra

 
 
 
 
     

Credits:

 
Thank you all for sharing your knowledge!
submitted by Yavuz_Selim to reddCoin [link] [comments]

Interested in contributing to the BTC network? Here is the steps to get a full node up and running in Linux.

These instructions will work both on a VPS cloud server or a personal computer. You may find cheap VPS somewhere online for rent.
What Is A Full Node?
A full node is a program that fully validates transactions and blocks. Almost all full nodes also help the network by accepting transactions and blocks from other full nodes, validating those transactions and blocks, and then relaying them to further full nodes.
Most full nodes also serve lightweight clients by allowing them to transmit their transactions to the network and by notifying them when a transaction affects their wallet. If not enough nodes perform this function, clients won’t be able to connect through the peer-to-peer network—they’ll have to use centralized services instead.
Many people and organizations volunteer to run full nodes using spare computing and bandwidth resources—but more volunteers are needed to allow Bitcoin to continue to grow. This document describes how you can help and what helping will cost you.
Costs And Warnings
Running a Bitcoin full node comes with certain costs and can expose you to certain risks. This section will explain those costs and risks so you can decide whether you’re able to help the network.
Special Cases
Miners, businesses, and privacy-conscious users rely on particular behavior from the full nodes they use, so they will often run their own full nodes and take special safety precautions. This document does not cover those precautions—it only describes running a full node to help support the Bitcoin network in general.
Please consult an expert if you need help setting up your full node correctly to handle high-value and privacy-sensitive tasks.
Secure Your Wallet
It’s possible and safe to run a full node to support the network and use its wallet to store your bitcoins, but you must take the same precautions you would when using any Bitcoin wallet. Please see the securing your wallet page for more information.
Minimum Requirements
Bitcoin Core full nodes have certain requirements. If you try running a node on weak hardware, it may work—but you’ll likely spend more time dealing with issues. If you can meet the following requirements, you’ll have an easy-to-use node.
Note: many operating systems today (Windows, Mac, and Linux) enter a low-power mode after the screensaver activates, slowing or halting network traffic. This is often the default setting on laptops and on all Mac OS X laptops and desktops. Check your screensaver settings and disable automatic “sleep” or “suspend” options to ensure you support the network whenever your computer is running.
Possible Problems
Legal: Bitcoin use is prohibited or restricted in some areas.
Bandwidth limits: Some Internet plans will charge an additional amount for any excess upload bandwidth used that isn’t included in the plan. Worse, some providers may terminate your connection without warning because of overuse. We advise that you check whether your Internet connection is subjected to such limitations and monitor your bandwidth use so that you can stop Bitcoin Core before you reach your upload limit.
Anti-virus: Several people have placed parts of known computer viruses in the Bitcoin block chain. This block chain data can’t infect your computer, but some anti-virus programs quarantine the data anyway, making it more difficult to run a full node. This problem mostly affects computers running Windows.
Attack target: People who want to disrupt the Bitcoin network may attack full nodes in ways that will affect other things you do with your computer, such as an attack that limits your available download bandwidth or an attack that prevents you from using your full node’s wallet for sending transactions.
Linux Instructions
The following instructions describe installing Bitcoin Core on Linux systems.
Ubuntu 14.10 Instructions for Bitcoin Core 0.10.0.
If you use Ubuntu Desktop, click the Ubuntu swirl icon to start the Dash and type “term” into the input box. Choose any one of the terminals listed:
Alternatively, access a console or terminal emulator using another method, such as SSH on Ubuntu Server or a terminal launcher in an alternative desktop environment.
Type the following line to add the Bitcoin Personal Package Archive (PPA) to your system:
sudo apt-add-repository ppa:bitcoin/bitcoin
You will be prompted for your user password. Provide it to continue. Afterwards, the following text will be displayed:
Stable Channel of bitcoin-qt and bitcoind for Ubuntu, and their dependencies
More info: https://launchpad.net/~bitcoin/+archive/ubuntu/bitcoin
Press [ENTER] to continue or ctrl-c to cancel adding it
Press enter to continue. The following text (with some variations) will be displayed and you will be returned to the command line prompt:
gpg: keyring /tmp/tmpixuqu73x/secring.gpg' created gpg: keyring/tmp/tmpixuqu73x/pubring.gpg' created gpg: requesting key 8842CE5E from hkp server > > > >keyserver.ubuntu.com gpg: /tmp/tmpixuqu73x/trustdb.gpg: trustdb created gpg: key 8842CE5E: public key "Launchpad PPA for Bitcoin" imported gpg: no ultimately trusted keys found gpg: Total number processed: 1 pg: imported: 1 (RSA: 1) OK
Type the following line to get the most recent list of packages:
sudo apt-get update
A large number of lines will be displayed as different update files are downloaded. This step may take several minutes on a slow Internet connection.
To continue, choose one of the following options
sudo apt-get install bitcoin-qt
sudo apt-get install bitcoind
sudo apt-get install bitcoin-qt bitcoind
After choosing what packages to install, you will be asked whether you want to proceed. Press enter to continue.
If you’re logged in as an administrative user with sudo access, you may log out. The steps in this section should be performed as the user you want to run Bitcoin Core. (If you’re an expert administrator, you can make this a locked account used only by Bitcoin Core.)
Before using the Bitcoin Core daemon, bitcoind, you need to create its configuration file with a user name and password. First create the .bitcoin directory, create (touch) the file, and set the file’s permissions so that only your user account can read it. From the terminal, type:
mkdir ~/.bitcoin touch ~/.bitcoin/bitcoin.conf chmod 600 ~/.bitcoin/bitcoin.conf
Then you can run the command bitcoind. It will print output similar to this:
bitcoind Error: To use the "-server" option, you must set a rpcpassword in the configuration file: /home/bitcoinorg/.bitcoin/bitcoin.conf It is recommended you use the following random password: rpcuser=bitcoinrpc rpcpassword=XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX (you do not need to remember this password)
The username and password MUST NOT be the same.
If the file does not exist, create it with owner-readable-only file permissions. It is also recommended to set alertnotify so you are notified of problems; for example: alertnotify=echo %s | mail -s "Bitcoin Alert" [email protected] The “rpcpassword” displayed will be unique for your system. You can copy the rpcuser and rpcpassword lines into your configuration file using the following commands. Note that in most Ubuntu terminals, you need to press Ctrl-Shift-C to copy and Ctrl-Shift-V to paste because Ctrl-C and Ctrl-V have different meanings in a Unix-style terminal.
echo rpcuser=bitcoinrpc >> ~/.bitcoin/bitcoin.conf echo rpcpassword=XXXXXX >> ~/.bitcoin/bitcoin.conf (Warning: Don’t use XXXXXX as your RPC password. Copy the rpcpassword displayed by bitcoind for your system.)
Now you can start Bitcoin Core daemon for real. Type the following command:
bitcoind -daemon
It will print a message that Bitcoin Core is starting. To interact with Bitcoin Core daemon, you will use the command bitcoin-cli (Bitcoin command line interface). Note: it may take up to several minutes for Bitcoin Core to start, during which it will display the following message whenever you use bitcoin-cli:
error: {"code":-28,"message":"Verifying blocks..."}
After it starts, you may find the following commands useful for basic interaction with your node:
to safely stop your node, run the following command:
bitcoin-cli stop
A complete list of commands is available in the Bitcoin.org developer reference.
When Bitcoin Core daemon first starts, it will begin to download the block chain. This step will take at least several hours, and it may take a day or more on a slow Internet connection or with a slow computer. During the download, Bitcoin Core will use a significant part of your connection bandwidth. You can stop Bitcoin Core at any time using the stop command; it will resume from the point where it stopped the next time you start it.
Optional: Start Your Node At Boot
Starting your node automatically each time your computer boots makes it easy for you to contribute to the network. The easiest way to do this is to start Bitcoin Core daemon from your crontab. To edit your crontab, run the following command:
crontab -e
@reboot bitcoind -daemon Save the file and exit; the updated crontab file will be installed for you. Now Bitcoin Core daemon will be automatically started each time your reboot your computer.
If you’re an Ubuntu expert and want to use an init script instead, see this Upstart script.
You have now completed installing Bitcoin Core. If you have any questions, please ask in one of Bitcoin’s many communities, such as Bitcoin StackExchange, BitcoinTalk technical support, or the #bitcoin IRC chatroom on Freenode.
To support the Bitcoin network, you also need to allow incoming connections. Please read the Network Configuration section for details.
Network Configuration
If you want to support the Bitcoin network, you must allow inbound connections.
When Bitcoin Core starts, it establishes 8 outbound connections to other full nodes so it can download the latest blocks and transactions. If you just want to use your full node as a wallet, you don’t need more than these 8 connections—but if you want to support lightweight clients and other full nodes on the network, you must allow inbound connections.
Servers connected directly to the Internet usually don’t require any special configuration. You can use the testing instructions below to confirm your server-based node accepts inbound connections.
Home connections are usually filtered by a router or modem. Bitcoin Core will request your router automatically configure itself to allow inbound connections to Bitcoin’s port, port 8333. Unfortunately many routers don’t allow automatic configuration, so you must manually configure your router. You may also need to configure your firewall to allow inbound connections to port 8333. Please see the following subsections for details.
Testing Connections
The BitNodes project provides an online tool to let you test whether your node accepts inbound connections. To use it, start Bitcoin Core (either the GUI or the daemon), wait 10 minutes, and then visit the GetAddr page (https://getaddr.bitnodes.io/). The tool will attempt to guess your IP address—if the address is wrong (or blank), you will need to enter your address manually.
For more instruction and reviews based off BTC please follow my subreddit /BTC_Reviews
all material from this post was found here --> https://bitcoin.org/en/full-node
submitted by Mattjhagen to Bitcoin [link] [comments]

Question re RPC interface

I have an idea for an app/website that could need to query the blockchain, and was wondering how to integrate BItcoin-QT client into my dev workflow...
I FINALLY got the entire blockchain downloaded. Took a bit, but it's finally here. That's hosted on my Mac.
Now, I develop using Virtual Box to do the hosting, with a NAT Network connection. Would I guess I'd need to set up the bitcoin.conf file to accept connections from whichever IP address the VB Nat Network appears as?
Can I mount the bitcoin data directory in Ubuntu, and just fire up bitcoind and have it use the blocks my Mac already downloaded, or will it corrupt that directory and force me to download it all over again?
Be nice to me! :) I probably should have sought a little guidance before I even downloaded the blockchain, but it's here now and I'm just trying to figure out the best way forward. Figure more than one of you have already gone down this path :)
Thanks!
submitted by identicalBadger to Bitcoin [link] [comments]

Version 0.9.1.60 out now! Major disk usage improvements.

[color=red][b][size=140]Version 0.9.1.60 of Credits client released. Major update, shrinking working dir to 7.7GB![/size][/b][/color]
A new release of the Credits client is out now. This version is a major refactoring that will trim the working dir to a fraction of the previous size.
[b][size=120]Updates in this release:[/size][/b] - Version number bumped to *.60. - Further stability improvements have been done to address the problematic "claim tip" error. The working directory bitcoin_chainstatecla will be merged with the credits_chainstate directory. [b]This change requires a reindex of the working directory[/b], or downloading an up to date version of the working directory from a torrent. - The Bitcoin blockchain will be trimmed once all Bitcoin blocks have been parsed. This will save a substantial amount of space on disk, the working directory will be approximately 7.7GB instead of 45GB. - Continued renaming of internal code base from Bitcredit to Credits.
[b][size=120]How to Upgrade[/size][/b] [b]NOTE! [/b]Starting with version 0.9.1.60 the Bitcoin block chain will be trimmed to preserve spaces, unless the option bitcoin_trimblockfiles has been set to 0. If a reindex is done, or initialization done from a clean install, the download process will require 22GB free on disk, which shrinks to about 7.7GB when the syncing of the working directory has finished.
[b]NOTE 2! [/b]If you are upgrading from a version of Credits that is lower than 0.9.1.51, the working directory could still be called Bitcredit or .bitcredit, depending on operating system. You have to rename the directory yourself.
The default working directories are: For Windows: C:/Users//AppData/Roaming/Bitcredit For Ubuntu/Linux: /.bitcredit For Mac: /Users//Library/Application Support/Bitcredit
And should be renamed to: For Windows: C:/Users//AppData/Roaming/Credits For Ubuntu/Linux: /.credits For Mac: /Users//Library/Application Support/Credits
If you are running an older version, shut it down. Wait until it has completely shut down (which might take a few minutes for older versions), then run the installer (on Windows) or just copy over /Applications/Credits-Qt (on Mac) or creditsd/credits-qt (on Linux).
[color=#FF0000]!!!BEFORE YOU START THE WALLET, MAKE SURE TO MAKE BACKUP COPIES OF THE FILES BITCREDIT_WALLET.DAT AND BITCOIN_WALLET.DAT, IF YOU HAVE A PREVIOUS INSTALLATION.!!![/color]
[i][b]Once installation is done, we highly recommend you to bootstrap the blockchain download and sync by downloading an up to date working directory: [url=http://credits-currency.org/viewtopic.php?f=18&t=517]Quick initialisation from torrent file[/url][/b][/i]
Downloads can be found at: http://credits-currency.org/viewforum.php?f=5
Getting started instructions can be found at: http://credits-currency.org/viewforum.php?f=18
submitted by gabriel_eiger to CreditsCrypto [link] [comments]

Interested in contributing to the BTC community? Here is a exhaustive manual to get you up and running. (Only takes about 20-30 minutes if you are fluent in command prompt on linux).

These instructions will work both on a VPS cloud server or a personal computer. You may find cheap VPS somewhere online for rent.
What Is A Full Node?
A full node is a program that fully validates transactions and blocks. Almost all full nodes also help the network by accepting transactions and blocks from other full nodes, validating those transactions and blocks, and then relaying them to further full nodes.
Most full nodes also serve lightweight clients by allowing them to transmit their transactions to the network and by notifying them when a transaction affects their wallet. If not enough nodes perform this function, clients won’t be able to connect through the peer-to-peer network—they’ll have to use centralized services instead.
Many people and organizations volunteer to run full nodes using spare computing and bandwidth resources—but more volunteers are needed to allow Bitcoin to continue to grow. This document describes how you can help and what helping will cost you.
Costs And Warnings
Running a Bitcoin full node comes with certain costs and can expose you to certain risks. This section will explain those costs and risks so you can decide whether you’re able to help the network.
Special Cases
Miners, businesses, and privacy-conscious users rely on particular behavior from the full nodes they use, so they will often run their own full nodes and take special safety precautions. This document does not cover those precautions—it only describes running a full node to help support the Bitcoin network in general.
Please consult an expert if you need help setting up your full node correctly to handle high-value and privacy-sensitive tasks.
Secure Your Wallet
It’s possible and safe to run a full node to support the network and use its wallet to store your bitcoins, but you must take the same precautions you would when using any Bitcoin wallet. Please see the securing your wallet page for more information.
Minimum Requirements
Bitcoin Core full nodes have certain requirements. If you try running a node on weak hardware, it may work—but you’ll likely spend more time dealing with issues. If you can meet the following requirements, you’ll have an easy-to-use node.
Note: many operating systems today (Windows, Mac, and Linux) enter a low-power mode after the screensaver activates, slowing or halting network traffic. This is often the default setting on laptops and on all Mac OS X laptops and desktops. Check your screensaver settings and disable automatic “sleep” or “suspend” options to ensure you support the network whenever your computer is running.
Possible Problems
Legal: Bitcoin use is prohibited or restricted in some areas.
Bandwidth limits: Some Internet plans will charge an additional amount for any excess upload bandwidth used that isn’t included in the plan. Worse, some providers may terminate your connection without warning because of overuse. We advise that you check whether your Internet connection is subjected to such limitations and monitor your bandwidth use so that you can stop Bitcoin Core before you reach your upload limit.
Anti-virus: Several people have placed parts of known computer viruses in the Bitcoin block chain. This block chain data can’t infect your computer, but some anti-virus programs quarantine the data anyway, making it more difficult to run a full node. This problem mostly affects computers running Windows.
Attack target: People who want to disrupt the Bitcoin network may attack full nodes in ways that will affect other things you do with your computer, such as an attack that limits your available download bandwidth or an attack that prevents you from using your full node’s wallet for sending transactions.
Linux Instructions
The following instructions describe installing Bitcoin Core on Linux systems.
Ubuntu 14.10 Instructions for Bitcoin Core 0.10.0.
If you use Ubuntu Desktop, click the Ubuntu swirl icon to start the Dash and type “term” into the input box. Choose any one of the terminals listed:
Alternatively, access a console or terminal emulator using another method, such as SSH on Ubuntu Server or a terminal launcher in an alternative desktop environment.
Type the following line to add the Bitcoin Personal Package Archive (PPA) to your system:
sudo apt-add-repository ppa:bitcoin/bitcoin
You will be prompted for your user password. Provide it to continue. Afterwards, the following text will be displayed:
Stable Channel of bitcoin-qt and bitcoind for Ubuntu, and their dependencies
More info: https://launchpad.net/~bitcoin/+archive/ubuntu/bitcoin
Press [ENTER] to continue or ctrl-c to cancel adding it
Press enter to continue. The following text (with some variations) will be displayed and you will be returned to the command line prompt:
gpg: keyring /tmp/tmpixuqu73x/secring.gpg' created gpg: keyring/tmp/tmpixuqu73x/pubring.gpg' created gpg: requesting key 8842CE5E from hkp server > > > >keyserver.ubuntu.com gpg: /tmp/tmpixuqu73x/trustdb.gpg: trustdb created gpg: key 8842CE5E: public key "Launchpad PPA for Bitcoin" imported gpg: no ultimately trusted keys found gpg: Total number processed: 1 pg: imported: 1 (RSA: 1) OK
Type the following line to get the most recent list of packages:
sudo apt-get update
A large number of lines will be displayed as different update files are downloaded. This step may take several minutes on a slow Internet connection.
To continue, choose one of the following options
sudo apt-get install bitcoin-qt
sudo apt-get install bitcoind
sudo apt-get install bitcoin-qt bitcoind
After choosing what packages to install, you will be asked whether you want to proceed. Press enter to continue.
If you’re logged in as an administrative user with sudo access, you may log out. The steps in this section should be performed as the user you want to run Bitcoin Core. (If you’re an expert administrator, you can make this a locked account used only by Bitcoin Core.)
Before using the Bitcoin Core daemon, bitcoind, you need to create its configuration file with a user name and password. First create the .bitcoin directory, create (touch) the file, and set the file’s permissions so that only your user account can read it. From the terminal, type:
mkdir ~/.bitcoin touch ~/.bitcoin/bitcoin.conf chmod 600 ~/.bitcoin/bitcoin.conf
Then you can run the command bitcoind. It will print output similar to this:
bitcoind Error: To use the "-server" option, you must set a rpcpassword in the configuration file: /home/bitcoinorg/.bitcoin/bitcoin.conf It is recommended you use the following random password: rpcuser=bitcoinrpc rpcpassword=XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX (you do not need to remember this password)
The username and password MUST NOT be the same.
If the file does not exist, create it with owner-readable-only file permissions. It is also recommended to set alertnotify so you are notified of problems; for example: alertnotify=echo %s | mail -s "Bitcoin Alert" [email protected] The “rpcpassword” displayed will be unique for your system. You can copy the rpcuser and rpcpassword lines into your configuration file using the following commands. Note that in most Ubuntu terminals, you need to press Ctrl-Shift-C to copy and Ctrl-Shift-V to paste because Ctrl-C and Ctrl-V have different meanings in a Unix-style terminal.
echo rpcuser=bitcoinrpc >> ~/.bitcoin/bitcoin.conf echo rpcpassword=XXXXXX >> ~/.bitcoin/bitcoin.conf (Warning: Don’t use XXXXXX as your RPC password. Copy the rpcpassword displayed by bitcoind for your system.)
Now you can start Bitcoin Core daemon for real. Type the following command:
bitcoind -daemon
It will print a message that Bitcoin Core is starting. To interact with Bitcoin Core daemon, you will use the command bitcoin-cli (Bitcoin command line interface). Note: it may take up to several minutes for Bitcoin Core to start, during which it will display the following message whenever you use bitcoin-cli:
error: {"code":-28,"message":"Verifying blocks..."}
After it starts, you may find the following commands useful for basic interaction with your node:
to safely stop your node, run the following command:
bitcoin-cli stop
A complete list of commands is available in the Bitcoin.org developer reference.
When Bitcoin Core daemon first starts, it will begin to download the block chain. This step will take at least several hours, and it may take a day or more on a slow Internet connection or with a slow computer. During the download, Bitcoin Core will use a significant part of your connection bandwidth. You can stop Bitcoin Core at any time using the stop command; it will resume from the point where it stopped the next time you start it.
Optional: Start Your Node At Boot
Starting your node automatically each time your computer boots makes it easy for you to contribute to the network. The easiest way to do this is to start Bitcoin Core daemon from your crontab. To edit your crontab, run the following command:
crontab -e
@reboot bitcoind -daemon Save the file and exit; the updated crontab file will be installed for you. Now Bitcoin Core daemon will be automatically started each time your reboot your computer.
If you’re an Ubuntu expert and want to use an init script instead, see this Upstart script.
You have now completed installing Bitcoin Core. If you have any questions, please ask in one of Bitcoin’s many communities, such as Bitcoin StackExchange, BitcoinTalk technical support, or the #bitcoin IRC chatroom on Freenode.
To support the Bitcoin network, you also need to allow incoming connections. Please read the Network Configuration section for details.
Network Configuration
If you want to support the Bitcoin network, you must allow inbound connections.
When Bitcoin Core starts, it establishes 8 outbound connections to other full nodes so it can download the latest blocks and transactions. If you just want to use your full node as a wallet, you don’t need more than these 8 connections—but if you want to support lightweight clients and other full nodes on the network, you must allow inbound connections.
Servers connected directly to the Internet usually don’t require any special configuration. You can use the testing instructions below to confirm your server-based node accepts inbound connections.
Home connections are usually filtered by a router or modem. Bitcoin Core will request your router automatically configure itself to allow inbound connections to Bitcoin’s port, port 8333. Unfortunately many routers don’t allow automatic configuration, so you must manually configure your router. You may also need to configure your firewall to allow inbound connections to port 8333. Please see the following subsections for details.
Testing Connections
The BitNodes project provides an online tool to let you test whether your node accepts inbound connections. To use it, start Bitcoin Core (either the GUI or the daemon), wait 10 minutes, and then visit the GetAddr page (https://getaddr.bitnodes.io/). The tool will attempt to guess your IP address—if the address is wrong (or blank), you will need to enter your address manually.
For more instruction and reviews based off BTC please follow my subreddit /BTC_Reviews
all material from this post was found here --> https://bitcoin.org/en/full-node
submitted by Mattjhagen to rBitcoin [link] [comments]

Running a full node using Bitcoin-daemon. Instructions for Linux.

These instructions will work both on a VPS cloud server or a personal computer. You may find cheap VPS somewhere online for rent.
What Is A Full Node?
A full node is a program that fully validates transactions and blocks. Almost all full nodes also help the network by accepting transactions and blocks from other full nodes, validating those transactions and blocks, and then relaying them to further full nodes.
Most full nodes also serve lightweight clients by allowing them to transmit their transactions to the network and by notifying them when a transaction affects their wallet. If not enough nodes perform this function, clients won’t be able to connect through the peer-to-peer network—they’ll have to use centralized services instead.
Many people and organizations volunteer to run full nodes using spare computing and bandwidth resources—but more volunteers are needed to allow Bitcoin to continue to grow. This document describes how you can help and what helping will cost you.
Costs And Warnings
Running a Bitcoin full node comes with certain costs and can expose you to certain risks. This section will explain those costs and risks so you can decide whether you’re able to help the network.
Special Cases
Miners, businesses, and privacy-conscious users rely on particular behavior from the full nodes they use, so they will often run their own full nodes and take special safety precautions. This document does not cover those precautions—it only describes running a full node to help support the Bitcoin network in general.
Please consult an expert if you need help setting up your full node correctly to handle high-value and privacy-sensitive tasks.
Secure Your Wallet
It’s possible and safe to run a full node to support the network and use its wallet to store your bitcoins, but you must take the same precautions you would when using any Bitcoin wallet. Please see the securing your wallet page for more information.
Minimum Requirements
Bitcoin Core full nodes have certain requirements. If you try running a node on weak hardware, it may work—but you’ll likely spend more time dealing with issues. If you can meet the following requirements, you’ll have an easy-to-use node.
Note: many operating systems today (Windows, Mac, and Linux) enter a low-power mode after the screensaver activates, slowing or halting network traffic. This is often the default setting on laptops and on all Mac OS X laptops and desktops. Check your screensaver settings and disable automatic “sleep” or “suspend” options to ensure you support the network whenever your computer is running.
Possible Problems
Legal: Bitcoin use is prohibited or restricted in some areas.
Bandwidth limits: Some Internet plans will charge an additional amount for any excess upload bandwidth used that isn’t included in the plan. Worse, some providers may terminate your connection without warning because of overuse. We advise that you check whether your Internet connection is subjected to such limitations and monitor your bandwidth use so that you can stop Bitcoin Core before you reach your upload limit.
Anti-virus: Several people have placed parts of known computer viruses in the Bitcoin block chain. This block chain data can’t infect your computer, but some anti-virus programs quarantine the data anyway, making it more difficult to run a full node. This problem mostly affects computers running Windows.
Attack target: People who want to disrupt the Bitcoin network may attack full nodes in ways that will affect other things you do with your computer, such as an attack that limits your available download bandwidth or an attack that prevents you from using your full node’s wallet for sending transactions.
Linux Instructions
The following instructions describe installing Bitcoin Core on Linux systems.
Ubuntu 14.10 Instructions for Bitcoin Core 0.10.0.
If you use Ubuntu Desktop, click the Ubuntu swirl icon to start the Dash and type “term” into the input box. Choose any one of the terminals listed:
Alternatively, access a console or terminal emulator using another method, such as SSH on Ubuntu Server or a terminal launcher in an alternative desktop environment.
Type the following line to add the Bitcoin Personal Package Archive (PPA) to your system:
sudo apt-add-repository ppa:bitcoin/bitcoin
You will be prompted for your user password. Provide it to continue. Afterwards, the following text will be displayed:
Stable Channel of bitcoin-qt and bitcoind for Ubuntu, and their dependencies
More info: https://launchpad.net/~bitcoin/+archive/ubuntu/bitcoin
Press [ENTER] to continue or ctrl-c to cancel adding it
Press enter to continue. The following text (with some variations) will be displayed and you will be returned to the command line prompt:
gpg: keyring /tmp/tmpixuqu73x/secring.gpg' created gpg: keyring/tmp/tmpixuqu73x/pubring.gpg' created gpg: requesting key 8842CE5E from hkp server > > > >keyserver.ubuntu.com gpg: /tmp/tmpixuqu73x/trustdb.gpg: trustdb created gpg: key 8842CE5E: public key "Launchpad PPA for Bitcoin" imported gpg: no ultimately trusted keys found gpg: Total number processed: 1 pg: imported: 1 (RSA: 1) OK
Type the following line to get the most recent list of packages:
sudo apt-get update
A large number of lines will be displayed as different update files are downloaded. This step may take several minutes on a slow Internet connection.
To continue, choose one of the following options
sudo apt-get install bitcoin-qt
sudo apt-get install bitcoind
sudo apt-get install bitcoin-qt bitcoind
After choosing what packages to install, you will be asked whether you want to proceed. Press enter to continue.
If you’re logged in as an administrative user with sudo access, you may log out. The steps in this section should be performed as the user you want to run Bitcoin Core. (If you’re an expert administrator, you can make this a locked account used only by Bitcoin Core.)
Before using the Bitcoin Core daemon, bitcoind, you need to create its configuration file with a user name and password. First create the .bitcoin directory, create (touch) the file, and set the file’s permissions so that only your user account can read it. From the terminal, type:
mkdir ~/.bitcoin touch ~/.bitcoin/bitcoin.conf chmod 600 ~/.bitcoin/bitcoin.conf
Then you can run the command bitcoind. It will print output similar to this:
bitcoind Error: To use the "-server" option, you must set a rpcpassword in the configuration file: /home/bitcoinorg/.bitcoin/bitcoin.conf It is recommended you use the following random password: rpcuser=bitcoinrpc rpcpassword=XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX (you do not need to remember this password)
The username and password MUST NOT be the same.
If the file does not exist, create it with owner-readable-only file permissions. It is also recommended to set alertnotify so you are notified of problems; for example: alertnotify=echo %s | mail -s "Bitcoin Alert" [email protected] The “rpcpassword” displayed will be unique for your system. You can copy the rpcuser and rpcpassword lines into your configuration file using the following commands. Note that in most Ubuntu terminals, you need to press Ctrl-Shift-C to copy and Ctrl-Shift-V to paste because Ctrl-C and Ctrl-V have different meanings in a Unix-style terminal.
echo rpcuser=bitcoinrpc >> ~/.bitcoin/bitcoin.conf echo rpcpassword=XXXXXX >> ~/.bitcoin/bitcoin.conf (Warning: Don’t use XXXXXX as your RPC password. Copy the rpcpassword displayed by bitcoind for your system.)
Now you can start Bitcoin Core daemon for real. Type the following command:
bitcoind -daemon
It will print a message that Bitcoin Core is starting. To interact with Bitcoin Core daemon, you will use the command bitcoin-cli (Bitcoin command line interface). Note: it may take up to several minutes for Bitcoin Core to start, during which it will display the following message whenever you use bitcoin-cli:
error: {"code":-28,"message":"Verifying blocks..."}
After it starts, you may find the following commands useful for basic interaction with your node:
to safely stop your node, run the following command:
bitcoin-cli stop
A complete list of commands is available in the Bitcoin.org developer reference.
When Bitcoin Core daemon first starts, it will begin to download the block chain. This step will take at least several hours, and it may take a day or more on a slow Internet connection or with a slow computer. During the download, Bitcoin Core will use a significant part of your connection bandwidth. You can stop Bitcoin Core at any time using the stop command; it will resume from the point where it stopped the next time you start it.
Optional: Start Your Node At Boot
Starting your node automatically each time your computer boots makes it easy for you to contribute to the network. The easiest way to do this is to start Bitcoin Core daemon from your crontab. To edit your crontab, run the following command:
crontab -e
@reboot bitcoind -daemon Save the file and exit; the updated crontab file will be installed for you. Now Bitcoin Core daemon will be automatically started each time your reboot your computer.
If you’re an Ubuntu expert and want to use an init script instead, see this Upstart script.
You have now completed installing Bitcoin Core. If you have any questions, please ask in one of Bitcoin’s many communities, such as Bitcoin StackExchange, BitcoinTalk technical support, or the #bitcoin IRC chatroom on Freenode.
To support the Bitcoin network, you also need to allow incoming connections. Please read the Network Configuration section for details.
Network Configuration
If you want to support the Bitcoin network, you must allow inbound connections.
When Bitcoin Core starts, it establishes 8 outbound connections to other full nodes so it can download the latest blocks and transactions. If you just want to use your full node as a wallet, you don’t need more than these 8 connections—but if you want to support lightweight clients and other full nodes on the network, you must allow inbound connections.
Servers connected directly to the Internet usually don’t require any special configuration. You can use the testing instructions below to confirm your server-based node accepts inbound connections.
Home connections are usually filtered by a router or modem. Bitcoin Core will request your router automatically configure itself to allow inbound connections to Bitcoin’s port, port 8333. Unfortunately many routers don’t allow automatic configuration, so you must manually configure your router. You may also need to configure your firewall to allow inbound connections to port 8333. Please see the following subsections for details.
Testing Connections
The BitNodes project provides an online tool to let you test whether your node accepts inbound connections. To use it, start Bitcoin Core (either the GUI or the daemon), wait 10 minutes, and then visit the GetAddr page (https://getaddr.bitnodes.io/). The tool will attempt to guess your IP address—if the address is wrong (or blank), you will need to enter your address manually.
For more instruction and reviews based off BTC please follow my subreddit /BTC_Reviews
all material from this post was found here --> https://bitcoin.org/en/full-node
submitted by Mattjhagen to BTC_Reviews [link] [comments]

BITCOIN PRIVATE KEY FINDER! 2020 NEW CRACK!! DOWNLOAD IT FREE Komodo daemon Install guide (Ubuntu 16.04) - KOR 7. Upgrading Bitcoin Core How Do I Make a CONF. File ? How to install Qt Creator and SDK on Linux Ubuntu

"C:\Program Files (x86)\Bitcoin\bitcoin-qt.exe" -datadir=d:\BitcoinData Start Bitcoin, now you will see all the files are created in the new data directory. Linux. By default Bitcoin will put its data here: ~/.bitcoin/ You need to do a "ls -a" to see directories that start with a dot. If that's not it, you can do a search like this: If you’ve already run Bitcoin Core, you will see a folder called Bitcoin. On Ubuntu, open a file browser by clicking on the folder icon in the launcher. The data directory, .bitcoin, is hidden by default. To show it, select the View -> Show Hidden Files menu option. Copy the Data Directory. Having found the default data directory, we can now Verify release signatures Download torrent Source code Show version history. Bitcoin Core Release Signing Keys v0.11.0+ 01EA5486DE18A882D4C2684590C8019E36C2E964 To install Bitcoin Core, run the following command. “sudo apt-get install bitcoin-qt” Press ‘y’ and Press <Enter>, the installation should start. It will take a few seconds to install. Once it’s installed, click on “Show Applications” icon and you should see Bitcoin Core icon on the Applications list. Now click on Bitcoin Core to Bitcoin qt data directory mac Bitcoin marketplace review Change and change. Bitcoin In Geld Umwandeln News, email and search are just the beginning. If you use the “ Rebuild and Rescan Databases” operation, but Armory still crashes shortly after starting up, you will need to manually remove the databases. Etoro Copyfund Fees >2.

[index] [2903] [17418] [18971] [10884] [2932] [8996] [20623] [17787] [4138] [534]

BITCOIN PRIVATE KEY FINDER! 2020 NEW CRACK!! DOWNLOAD IT FREE

A Clickbait Video about Ubuntu Data Collection - Duration: ... How to install the QT Wallet - GNU/Linux Version - Ubuntu 16.04 - Duration: ... Active Directory Tutorial for Beginners - Duration: ... Ubuntu: Creating a Directory and Text File via Terminal - Duration: ... How to run Bitcoin-qt as a server with a configuration file ... Reading Data from config properties file - Duration: ... this video explain how you build the compile environment on windows to create altcoin ~ cryptocoin Windows QT `s Compile Depencies ~ complete deps folder included to download . Depencies : https ... This pyqt5 tutorial will show you how to use Qt Designer with python. The first steps to using QtDesigner is to download and install pyqt5-tools (this can be done through pip). Next you need to ... For Bitcoin Core Client updates: https://bitcoincore.org @bitcoincoreorg in Twitter Linux terminal commands: sha256sum, tar, cp, sudo, rm, exit, less * All other commands have been covered in ...

Flag Counter