Download Bitcoin Blockchain [bootstrap.dat] - Flo's press 4u

Bitcoin blockchain torrent (bootstrap.dat)

[14.2GB as of the 279K block torrent] [17.5GB as of the 295K block torrent]
Announcement and information here: https://bitcointalk.org/index.php?topic=145386.0
As of this post, the torrent is up to block 279,000.
This torrent's purpose is to make bringing new clients that store the blockchain locally online faster. Instead of downloading from the network, you can download from the bittorrent network, which in some cases is faster, an then import the raw block data into your bitcoin client.
submitted by pointychimp to torrentlinks [link] [comments]

Bitcoin full node with 2GB RAM, 100GB SSD, 2TB BW, 5$/monthly, paypal

Let's run a full node for 5$ per month. This deal is fantastic. Follow this link to sign up.
http://lowendbox.com/blog/vps-ace-325month-1gb-and-5month-2gb-openvz-vps-in-the-usa-and-the-netherlands/
Use bootstrap torrent to boost the blockchain syncing. http://sourceforge.net/projects/bitcoin/files/Bitcoin/blockchain/bootstrap.dat.torrent/download
and this is a guide
Edit : Ignore PayPal. Looking for the best VPS accepting Bitcoin.
submitted by bitrocket to Bitcoin [link] [comments]

Where to find a bootstrap.dat.gz to speedup newmachines sync?

Where to find a bootstrap.dat.gz to speedup newmachines sync?
most update one possible... torrent are fine, but direct download would be better.
Please, not this since it's uncompressed: http://sourceforge.net/projects/bitcoin/files/Bitcoin/blockchain/bootstrap.dat.torrent/download
Thanks for any suggestion
submitted by alexwbc to Bitcoin [link] [comments]

BTC Blockchain download (bootstrap.dat) /r/Bitcoin

BTC Blockchain download (bootstrap.dat) /Bitcoin submitted by ABitcoinAllBot to BitcoinAll [link] [comments]

HEY! Those of you who recently got into bitcoin by torrenting "The Rise and Rise of Bitcoin", Lend a hand and use that same torrent client of yours to seed the blockchain bootstrap.dat

It would be awesome to see as many people seeding the blockchain as are seeding this movie!
https://bitcoin.org/bin/blockchain/bootstrap.dat.torrent
submitted by djillryan to Bitcoin [link] [comments]

Anyone use linearize script before to create bootstrap.dat blockchain? /r/Bitcoin

Anyone use linearize script before to create bootstrap.dat blockchain? /Bitcoin submitted by BitcoinAllBot to BitcoinAll [link] [comments]

Groestlcoin 6th Anniversary Release

Introduction

Dear Groestlers, it goes without saying that 2020 has been a difficult time for millions of people worldwide. The groestlcoin team would like to take this opportunity to wish everyone our best to everyone coping with the direct and indirect effects of COVID-19. Let it bring out the best in us all and show that collectively, we can conquer anything.
The centralised banks and our national governments are facing unprecedented times with interest rates worldwide dropping to record lows in places. Rest assured that this can only strengthen the fundamentals of all decentralised cryptocurrencies and the vision that was seeded with Satoshi's Bitcoin whitepaper over 10 years ago. Despite everything that has been thrown at us this year, the show must go on and the team will still progress and advance to continue the momentum that we have developed over the past 6 years.
In addition to this, we'd like to remind you all that this is Groestlcoin's 6th Birthday release! In terms of price there have been some crazy highs and lows over the years (with highs of around $2.60 and lows of $0.000077!), but in terms of value– Groestlcoin just keeps getting more valuable! In these uncertain times, one thing remains clear – Groestlcoin will keep going and keep innovating regardless. On with what has been worked on and completed over the past few months.

UPDATED - Groestlcoin Core 2.18.2

This is a major release of Groestlcoin Core with many protocol level improvements and code optimizations, featuring the technical equivalent of Bitcoin v0.18.2 but with Groestlcoin-specific patches. On a general level, most of what is new is a new 'Groestlcoin-wallet' tool which is now distributed alongside Groestlcoin Core's other executables.
NOTE: The 'Account' API has been removed from this version which was typically used in some tip bots. Please ensure you check the release notes from 2.17.2 for details on replacing this functionality.

How to Upgrade?

Windows
If you are running an older version, shut it down. Wait until it has completely shut down (which might take a few minutes for older versions), then run the installer.
OSX
If you are running an older version, shut it down. Wait until it has completely shut down (which might take a few minutes for older versions), run the dmg and drag Groestlcoin Core to Applications.
Ubuntu
http://groestlcoin.org/forum/index.php?topic=441.0

Other Linux

http://groestlcoin.org/forum/index.php?topic=97.0

Download

Download the Windows Installer (64 bit) here
Download the Windows Installer (32 bit) here
Download the Windows binaries (64 bit) here
Download the Windows binaries (32 bit) here
Download the OSX Installer here
Download the OSX binaries here
Download the Linux binaries (64 bit) here
Download the Linux binaries (32 bit) here
Download the ARM Linux binaries (64 bit) here
Download the ARM Linux binaries (32 bit) here

Source

ALL NEW - Groestlcoin Moonshine iOS/Android Wallet

Built with React Native, Moonshine utilizes Electrum-GRS's JSON-RPC methods to interact with the Groestlcoin network.
GRS Moonshine's intended use is as a hot wallet. Meaning, your keys are only as safe as the device you install this wallet on. As with any hot wallet, please ensure that you keep only a small, responsible amount of Groestlcoin on it at any given time.

Features

Download

iOS
Android

Source

ALL NEW! – HODL GRS Android Wallet

HODL GRS connects directly to the Groestlcoin network using SPV mode and doesn't rely on servers that can be hacked or disabled.
HODL GRS utilizes AES hardware encryption, app sandboxing, and the latest security features to protect users from malware, browser security holes, and even physical theft. Private keys are stored only in the secure enclave of the user's phone, inaccessible to anyone other than the user.
Simplicity and ease-of-use is the core design principle of HODL GRS. A simple recovery phrase (which we call a Backup Recovery Key) is all that is needed to restore the user's wallet if they ever lose or replace their device. HODL GRS is deterministic, which means the user's balance and transaction history can be recovered just from the backup recovery key.

Features

Download

Main Release (Main Net)
Testnet Release

Source

ALL NEW! – GroestlcoinSeed Savior

Groestlcoin Seed Savior is a tool for recovering BIP39 seed phrases.
This tool is meant to help users with recovering a slightly incorrect Groestlcoin mnemonic phrase (AKA backup or seed). You can enter an existing BIP39 mnemonic and get derived addresses in various formats.
To find out if one of the suggested addresses is the right one, you can click on the suggested address to check the address' transaction history on a block explorer.

Features

Live Version (Not Recommended)

https://www.groestlcoin.org/recovery/

Download

https://github.com/Groestlcoin/mnemonic-recovery/archive/master.zip

Source

ALL NEW! – Vanity Search Vanity Address Generator

NOTE: NVidia GPU or any CPU only. AMD graphics cards will not work with this address generator.
VanitySearch is a command-line Segwit-capable vanity Groestlcoin address generator. Add unique flair when you tell people to send Groestlcoin. Alternatively, VanitySearch can be used to generate random addresses offline.
If you're tired of the random, cryptic addresses generated by regular groestlcoin clients, then VanitySearch is the right choice for you to create a more personalized address.
VanitySearch is a groestlcoin address prefix finder. If you want to generate safe private keys, use the -s option to enter your passphrase which will be used for generating a base key as for BIP38 standard (VanitySearch.exe -s "My PassPhrase" FXPref). You can also use VanitySearch.exe -ps "My PassPhrase" which will add a crypto secure seed to your passphrase.
VanitySearch may not compute a good grid size for your GPU, so try different values using -g option in order to get the best performances. If you want to use GPUs and CPUs together, you may have best performances by keeping one CPU core for handling GPU(s)/CPU exchanges (use -t option to set the number of CPU threads).

Features

Usage

https://github.com/Groestlcoin/VanitySearch#usage

Download

Source

ALL NEW! – Groestlcoin EasyVanity 2020

Groestlcoin EasyVanity 2020 is a windows app built from the ground-up and makes it easier than ever before to create your very own bespoke bech32 address(es) when whilst not connected to the internet.
If you're tired of the random, cryptic bech32 addresses generated by regular Groestlcoin clients, then Groestlcoin EasyVanity2020 is the right choice for you to create a more personalised bech32 address. This 2020 version uses the new VanitySearch to generate not only legacy addresses (F prefix) but also Bech32 addresses (grs1 prefix).

Features

Download

Source

Remastered! – Groestlcoin WPF Desktop Wallet (v2.19.0.18)

Groestlcoin WPF is an alternative full node client with optional lightweight 'thin-client' mode based on WPF. Windows Presentation Foundation (WPF) is one of Microsoft's latest approaches to a GUI framework, used with the .NET framework. Its main advantages over the original Groestlcoin client include support for exporting blockchain.dat and including a lite wallet mode.
This wallet was previously deprecated but has been brought back to life with modern standards.

Features

Remastered Improvements

Download

Source

ALL NEW! – BIP39 Key Tool

Groestlcoin BIP39 Key Tool is a GUI interface for generating Groestlcoin public and private keys. It is a standalone tool which can be used offline.

Features

Download

Windows
Linux :
 pip3 install -r requirements.txt python3 bip39\_gui.py 

Source

ALL NEW! – Electrum Personal Server

Groestlcoin Electrum Personal Server aims to make using Electrum Groestlcoin wallet more secure and more private. It makes it easy to connect your Electrum-GRS wallet to your own full node.
It is an implementation of the Electrum-grs server protocol which fulfils the specific need of using the Electrum-grs wallet backed by a full node, but without the heavyweight server backend, for a single user. It allows the user to benefit from all Groestlcoin Core's resource-saving features like pruning, blocks only and disabled txindex. All Electrum-GRS's feature-richness like hardware wallet integration, multi-signature wallets, offline signing, seed recovery phrases, coin control and so on can still be used, but connected only to the user's own full node.
Full node wallets are important in Groestlcoin because they are a big part of what makes the system be trust-less. No longer do people have to trust a financial institution like a bank or PayPal, they can run software on their own computers. If Groestlcoin is digital gold, then a full node wallet is your own personal goldsmith who checks for you that received payments are genuine.
Full node wallets are also important for privacy. Using Electrum-GRS under default configuration requires it to send (hashes of) all your Groestlcoin addresses to some server. That server can then easily spy on your transactions. Full node wallets like Groestlcoin Electrum Personal Server would download the entire blockchain and scan it for the user's own addresses, and therefore don't reveal to anyone else which Groestlcoin addresses they are interested in.
Groestlcoin Electrum Personal Server can also broadcast transactions through Tor which improves privacy by resisting traffic analysis for broadcasted transactions which can link the IP address of the user to the transaction. If enabled this would happen transparently whenever the user simply clicks "Send" on a transaction in Electrum-grs wallet.
Note: Currently Groestlcoin Electrum Personal Server can only accept one connection at a time.

Features

Download

Windows
Linux / OSX (Instructions)

Source

UPDATED – Android Wallet 7.38.1 - Main Net + Test Net

The app allows you to send and receive Groestlcoin on your device using QR codes and URI links.
When using this app, please back up your wallet and email them to yourself! This will save your wallet in a password protected file. Then your coins can be retrieved even if you lose your phone.

Changes

Download

Main Net
Main Net (FDroid)
Test Net

Source

UPDATED – Groestlcoin Sentinel 3.5.06 (Android)

Groestlcoin Sentinel is a great solution for anyone who wants the convenience and utility of a hot wallet for receiving payments directly into their cold storage (or hardware wallets).
Sentinel accepts XPUB's, YPUB'S, ZPUB's and individual Groestlcoin address. Once added you will be able to view balances, view transactions, and (in the case of XPUB's, YPUB's and ZPUB's) deterministically generate addresses for that wallet.
Groestlcoin Sentinel is a fork of Groestlcoin Samourai Wallet with all spending and transaction building code removed.

Changes

Download

Source

UPDATED – P2Pool Test Net

Changes

Download

Pre-Hosted Testnet P2Pool is available via http://testp2pool.groestlcoin.org:21330/static/

Source

submitted by Yokomoko_Saleen to groestlcoin [link] [comments]

[ANN] Bitcoin blockchain data torrent - Updated to height 317,000. Please seed!

[ANN] Bitcoin blockchain data torrent - Updated to height 317,000. Please seed! submitted by jgarzik to Bitcoin [link] [comments]

(Updated) [Staking] Reddcoin Core client GUI wallet on a Raspberry Pi Model 3B

Intro

This thread is an update to my first Reddcoin staking tutorial that was written 7 months ago.
 
The reason for the update
My Reddcoin Core software crashed and became unusable. My Raspberry Pi 3B would lag and freeze, I couldn't stake anymore.
 
Instead of just redoing everything the same way, I wanted to see if I could improve on 3 points:
 
The updates
 
If you would like to tip me
Writing a tutorial like this takes time and effort; tips are appreciated. My Reddcoin address: RqvdnNX5MTam855Y2Vudv7yVgtXdcYaQAW.
     

Overview

 

Steps

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
     

Video

https://www.youtube.com/watch?v=Snr5e8bzftI
This video shows how long it takes to start Reddcoin Core.   TL;DR:
     

Extra

Backup
Backup your wallet to prevent losing the RDDs in your wallet! There are two methods to backup, do both. Make new backups if you create a new receiving address!
 
 
   
Boot with only 1 USB drive plugged in:
Make sure only the USB drive (with the swap partition and data partition) is plugged in when you boot up your Raspberry Pi. This to make sure the swap partition (/dev/sda1) is recognized correctly.   If you boot up with multiple USB drives, Lubuntu might see the USB drive with the swap partition as the second drive (instead of the first drive), and ignore the 2 GB swap partition. If this happens, starting Reddcoin can render the Raspberry Pi unresponsive.
   
Connection issues If you have issues syncing the blockchain because you have 0 network connections, please follow the instructions in this thread.
   
Start Reddcoin Core easier
Run a shell script (.sh file), so you can start Reddcoin just by double clicking on an icon on your Desktop.
   
Minimization options
Adjust minimization options, so you can safely press on the X button (the close/exit button on the upper right corner).
   
RealVNC VNC Viewer (client) and VNC Connect (server): To remote connect to the Raspberry Pi, I use VNC Viewer ad VNC Connect from RealVNC.
 
   
Chromium as browser: The updates break Firefox, the browser crashes when you try to run it. Install another browser, Chromium, to solve this issue.
   
Updates / Upgrades
If Software Updater shows up and tells you that there is updated software available, do not install the updates using Software Updater. Use LXTerminal to update Lubuntu.  
     

Credits:

   
Credits in previous tutorial:
submitted by Yavuz_Selim to reddCoin [link] [comments]

[Staking] Reddcoin Core client GUI wallet on a Raspberry Pi Model 3B

This tutorial has been updated: https://www.reddit.com/reddCoin/comments/a0wn1v/updated_staking_reddcoin_core_client_gui_wallet/.
   

Intro

I want to stake Reddcoins on my Raspberry Pi, but there is no easy to install package for the Reddcoin Core client. I found some tutorials (mentioned at the bottom, under 'credits'), but I still struggled to get the result I wanted. It took some small adjustments, but I got the GUI Wallet of Reddcoin Core working on my Raspberry Pi Model 3B. See the steps below. :).
 
If you have any questions or comments, please post a comment in this thread, so others can also benefit from it.
 
If you would like to tip me: RqvdnNX5MTam855Y2Vudv7yVgtXdcYaQAW.
   
Even though Raspbian is the primary OS for the Raspberry Pi, it seems that it's not possible to build and compile the Reddcoin wallet software for Raspbian Stretch. However, I got the wallet compiled using Ubuntu MATE.
     

Overview

     

Steps

 
 
 
 
 
 
 
 
 
 
 
 
 
 
     

Extra

 
 
 
 
     

Credits:

 
Thank you all for sharing your knowledge!
submitted by Yavuz_Selim to reddCoin [link] [comments]

Start Here for Much Wallet WOW!

EDIT 2017-02-10: A word about Nodes

There is a discussion about nodes that came up today, where it seems I'm discouraging people from running the full QT/Core client. Yes and No. What I'm trying to make sure people understand is how things work, and that it is NOT mandatory to run a client in order to use Dogecoins (and yes, I realise that browser-based tools like coinb.in and wallet sweepers are 'clients' by strict definition).
That said, more nodes is absolutely a good thing for the network. Preferrably full nodes. How do you run a full node? Just run Core/QT and open up Port 22556 on your router so it can connect to more than 8 peers. What will it cost you? You need your machine to be on 24/7/365, you need enough storage for the full blockchain (currently about 20Gb. Bitcoin is over 120Gb) and enough bandwidth to keep it in sync and share blocks with peers. A couple of Gb a month, most likely. This is best done with a desktop on a wired broadband link. Or maybe a hosted VM in the cloud. :)

EDIT 2017-01-09: Wallets WITHOUT Clients

Since I started helping people on /BitcoinBeginners, I'm getting a lot of questions about how to use wallets without running clients or trusting third parties. So here are a couple of resources that will make that possible, and not just for Dogecoin:
Multi-Coin Wallet Generator Now supporting 129 currencies! Coinb.in Start by setting the currency, found in the gear wheel in the Broadcast tab. Dogecoin Wallet Sweeper Redeem 'paper' wallets containing up to about 100 UTXOs. Bitinfo Charts My favourite block explorer, handles a bunch of cryptos.
Using these resources, it is possible to hold, receive and spend coins in various currencies, without having to run QT or a 'lite' client. You can also download and run the pages on your own device.

EDIT 2016-11-23: SEMANTICS about MINING! :P

Even though there is already a section on mining below, it has been suggested given the huge number of posts on the subject that this needs to be made clearer. Since people get their panties in a twist over the word 'dead', lets change that...

MINING IS DEAD!

MINING DOGECOIN IS UNPROFITABLE!

Put simply, there is no way to mine Dogecoin and make a profit because of the massive hashpower provided by industrial-scale Litecoin miners. Mining Doge directly stopped being viable when our hashrate exploded with the introduction of AuxPoW. Mining with CPU's and GPU's died when ASICs were introduced. And mining with a laptop WILL kill your laptop and cost you a fortune to repair or replace. Mining Litecoin with an exchange that also mines Doge and others will earn less than the electricity consumed, and you won't recover your costs. Probably ever, but certainly not in any reasonable time.
Mining other currencies may be a thing, but that's beyond our scope here. This is /Dogecoin, not /GetRichMiningCryptos after all. If you want to mine the newest scamcoin for fun and profit, look elsewhere for advice. :/
Oh, and most important:

READ BEFORE YOU POST!

At any given time, there are half a dozen posts on the frontpage just like the one you're about to write, where the answers have already been given. Read them. Don't make people waste their time repeating themselves because you were too lazy to bother reading stuff. :P
So there I was, having a quiet Sundy arvo bludge, as you do, when 42points turned up on Facebook and asked me to write a new sticky post for /dogecoin. Why would he do this, when he should be having a bludge himself, I hear you ask? Well, seems he was doing exactly that, and wanted to fob off the work he’s too slack to do himself. ;) Ah well, being a sucker for punishment, I’ll grudgingly oblige I guess.
OK, first things first.

The Clients:

Dogecoin Core 1.10.0 2015-Nov-01
Bootstrap file for Core to save some download time.
Dogecoin Core Guide Wiki
MultiDoge v0.1.7 2016-Jan-31
Android Dogecoin Wallet 2.0.8 2016-Jan-18
Android Coinomi Wallet
Java Cate 0.14 alpha 2 Multicoin wallet 2016-Feb-14
Exodus multicoin wallet
iOS Doughwallet

Do you REALLY need a client?

Wallet ELI5
UTXO ELI5
Paper Wallet Generator
Sample HTML Wallet List
Dogetipbot subreddit and website
Dogechain Wallet
Block.io Wallet
Exchanges
BTC38
Poloniex
CoinSpot
ShapeShift - Not really an exchange, rather a currency trader.

Mining

Litecoinpool
Prohashing
Zpool

Explorers

BitInfoCharts - My favourite, has charts!
chain.so
dogechain.info
/dogecoindev where the devs hang out

More Info

Dogeducation
Technical Wiki
Preev currency value calculator

EDITS:

From peoplma
I was wondering if you could add just a couple things. A link to the coinomi android wallet, it's probably the best one out there. And a sentence somewhere along the lines of "if you need help with any dogecoin software you are welcome to make a post, but PLEASE include your OS, version number of the client, and any relevant transaction IDs that you are willing to share" if you can fit that in somewhere.
Also, if you want to link to Prohashing, I'm pretty sure it's the only Scrypt mining pool that will actually pay out in doge. The others I know of pay out in litecoin or bitcoin. And it's a profit switching multipool, so gives a better return than just mining ltc/doge.
And there's these two wiki articles I thought would be helpful to link /dogecoin/wiki/technical for those technically minded newbies or intermediate users who want to dig a little deeper. And maybe a link to /dogecoin/wiki/dogecoincoreguide next to the link for dogecoin core.
From pts2002
Finally a proper sticky post! Here's some other stuff you could add:
zpool.ca mining pool - You can get paid in pretty much any coin, and you can mine in multiple algos (currently mining lyra2v2 with my GPU). Doing about 500Ð/day
shapeshift.io exchange - My favourite exchange, quick and easy. No registration required!
Also, you should add some blockchain explorers!
chain.so - Support for bitcoin, litecoin and doge.
dogechain.info - Official blockchain explorer. Includes a wallet (already mentioned). Live update currently not working (?)
EDIT: Here's another thing I found!
preev.com currency value calculator - Easy way to check the value of your dogecoins (or bitcoins, or litecoins, or peercoins)!
submitted by Fulvio55 to dogecoin [link] [comments]

BitcoinXT bootstrap.dat

Hey I just setup a bitcoinxt node but I'd like to speed up the sync process with a bootstrap.dat. Can I safely use the one available for bitcoin-core?
submitted by loserkids to bitcoinxt [link] [comments]

[ELI5] Extracting Privkeys from QT/Core

We have a constant stream of people coming back after abandoning Dogecoin and the sub in 2014 when the price fell. These people all have old versions of QT and are now basically trying to recover their coins, presumably to cash out and abandon us again. This is causing strain for the network, as far more people are trying to leech blocks than seed them.
The thing is, none of this is necessary. Especially if you're just going to dump coins. With resources such as https://coinb.in/#settings all you need are your private keys, and you can create, sign and broadcast transactions yourself. No client required, let alone one as resource-hungry as QT.

"So, how do I get my keys?"

First of all, lets talk about data management. The overwhelming majority of coins are not lost through theft, especially direct theft of wallets (as distinct from wholesale thefts/scams/implosions like Moolah, GAW, MtGox, Cryptsy, and even our own beloved Dogetipbot). Most coins are lost because people forget about their wallets and do silly things like reformat hard drives, lose passwords and so on.
So, everyone should have a wallet list. Here is a sample bit of HTML that gives you a page with two columns of wallets, one for local wallets you would withdraw coins to, the other the third-party wallets you would deposit coins to third parties through (do note that many services use temporary addresses generated for deposits which expire after 24h or so). A page like this is how I manage my 100+ wallets, and I have copies on my network and hidden online. Such a page makes it easy to at least keep track of all your wallets, for a trivial amount of work to set up.
 
 Sample - Twitter Fr DFXXz9gq3WkgJaHn9tXRChMhFQcwm4Y251 To DByYgzd4ec5Ku9vPag8XqoBfyRpsoj8Xs3 @TipDoge Sample - Backslash Fr DSDyv83VC1QtEnmJ4ATKFn5Sw3iC12VLmX To D9MsxSyJe5Mq7fWFRpC7zQQt1gexHccN4w Backslash To DJ3GL68kw8vh99RvxnEmQKE8A3cWRoEEqo Backslash Faucet Sample - Block.io To DE5QamzWVnxK2HmCS61cUsrn9iwgTArunU Block.io 

"OK, great, so now I have a list of my wallets. Now what?"

Now you're going to need the private keys for each of those wallets. Obviously you're not going to store these in a public place though. So you will need a separate file, which can just be plain text. Copy each of those addresses into it.
Now go ahead and fire up QT. If you haven't synced it in 3 years, its going to take forever, but that doesn't matter. You don't actually need the blockchain for this, so you don't have to wait for it to catch up.
Open up the console which is in the Help menu. Then give the command dumpprivkey with the wallet address you want the key to. Then use the up-arrow key to bring that command back, replace the address with the next one, and keep going until you have them all.
It will look something like this:
 13:05:18 Welcome to the Dogecoin RPC console. Use up and down arrows to navigate history, and Ctrl-L to clear screen. Type help for an overview of available commands. 13:11:06 dumpprivkey D9xDcRthB6XP4vRGqiyKdDfVJ7CWhYuBBi 13:11:06 6KEcssuq1wWUrFVmMF8yDxHuAdQMiRezz53zDxADLmyoXnix7iM 13:12:00 dumpprivkey DUDARNrGHVTFcCgriwRWgDQJPKDuDQr9jg 13:12:00 6JNk6NNFZcr49fbsD2jcTfTxFLjJKq9DHQ5JU8CYeZ2Cz6JdKMY 13:12:25 dumpprivkey DG6xnwCT6BXePaySqU85XocobZmhbJczQH 13:12:25 6JNXFv95Mp9SzehHw9jojjdxHRNPeh77qCsRbaNwJZMp9MKCAu3 
Yes, those are real wallets. But don't bother trying to steal my coins, I just generated them on https://walletgenerator.net/ and they're empty.
That's basically it. All you need to do is add some descriptions of what the wallets are, pretty up the format to your liking, and save copies in multiple, secure places, including printed out.

Remember, if you lose your keys, OR someone else sees them, you lose your coins!

If those were my real wallets above, you could use the keys and spend my coins. So obviously, don't let anyone else, especially annoying little brothers, get their grubby hands on them. But also make sure they can be discovered if anything happens to you. That's why the printed copies... nobody is going to go trolling through your porn or warez collection on the offchance there's something valuable in there. But they will look in your safe or wherever you store other important documents. Just be sure to leave a note as to what they are and how to use them. Remember the woman who came here a couple years ago who had found a USB stick with 110 BTC in a locked wallet.dat on it from her dead husband? I sometimes wonder if she ever got the money. Don't be her. Or him.

"OK, great. Now I have my keys. What now?"

Well, you can spend coins using https://coinb.in/#settings from any wallet you have the keys to. First step is to choose the network. Dogecoin (mainnet) obviously. Then go to Transaction in the +New menu. Enter your address and hit the Load button. It will pull in the first 100 transactions. Now enter the address to pay, and the amount.
Note the Transaction Fee box!
You want this amount to be zero. Depending on whether you're moving coins to another of your wallets to consolidate them (a very good idea.. go read the UTXO ELI5, which you will find a couple pages into https://www.reddit.com/dogecoin/comments/4yts6h/start_here_for_much_wallet_wow/ - Yes, I'm going to make you work for it, cos there's tons of useful stuff there you need to know), or paying someone else, you may want to select which inputs to use.
Once you're happy with the transaction, go ahead and submit it. You will now get a block of text, which is the raw, unsigned transaction. Copy this. Go to the Sign tab. Paste it. Add your private key and Submit to sign it.
After a little bit, you will get a signed transaction. Copy it. Go to the Broadcast tab, paste it and hit Submit.
That's it. It should go into the next block in a minute or two. Yes, even without paying a mining fee. Our network is so lightly loaded that there are no contention issues like the Bitcoin people have to put up with.

"That's it? So why do I need QT?"

You don't. The process above is all that's involved in spending coins. Everything else is window dressing. So there is no need to run QT, or any other client. Oh, and since you can download the site and run it locally (mostly offline), there is no security issue beyond the usual keyloggers/spyware that can compromise anything. And by knowing how to do this, you are much better protected from accidental loss than someone who blindly trusts black boxes they don't understand.
Oh, one final thing... if you really want to help the network by seeding rather than leeching, go ahead and run a full node. Instructions are in that link above. AND you may want to help seed the bootstrap file torrent from a couple of days ago. Just because YOU don't need it, doesn't mean others don't, right?
submitted by Fulvio55 to dogecoin [link] [comments]

Where do I find the _latest_ bootstrap.dat torrent? I'd like to seed!

I am confused which bootstrap.dat is the latest and what not. No idea if the torrent from bitcoin.org has been updated. Would be nice if anyone could link the latest .torrent so I can jump in and seed it all day long.
Thanks!
submitted by theDewwd to Bitcoin [link] [comments]

My wallet has been trying to synchronize for 40 minutes now, halp?

submitted by throwawayasdf1234asd to Bitcoin [link] [comments]

Dogecoin Stack Exchange Day 26 : Sabotage

On Saturday we had 20 questions with a score of ten or more.
Today we have 10 questions with a score of ten or more.
https://area51.stackexchange.com/proposals/110056
None of the dogecoin stack followers have downvoted any questions. Maybe an external moderator downvoted questions in the proposal? Or a group of people decided to wihdraw their votes? Why? Such scare! Very conspir.. plz up.!
Status 69 Followers 10 questions with a score of 10 or more
*Required to start comittment phase
20 more questions with a score of 10 or more
A lot of followers haven't voted, if you haven't voted, plz vote. If you haven't signed up, plz sign.
Current Question List
Question Votes
How can I setup a Dogecoin wallet? 14
What are the best ways to back up my wallet? 12
What is "cold storage"? Why is it better for long-term holding? 11
How can I buy Dogecoin? 11
I am trying to install dogecoin core on ubuntu how do i install the dependancies? 10
How can Dogecoin be used outside of Internet transactions? 10
How can I "bootstrap" to speed up the process of syncing up with the Dogecoin blockchain? 10
How can I sell my stuff for dogecoins? 10
Can an old, unencrypted core wallet backup be used to move dogecoins out of that same wallets currently encrypted core wallet? 10
How does merged mining work with litecoin? 10
How do I backup my wallet, and how do I restore form the backup? 9
How to setup a dogecoin public node? 9
How do I get dogecoins? 9
What is a public node? 9
How do i import a existing wallet.dat file from a previous dogecoin installation 9
Why are online wallets considered bad? 9
What would happen to the dogecoin hash rate if litecoin became unpopular? 9
How long does it take for the dogecoin wallet to sync with the dogecoin blockchain? 9
Where can I buy things with doge? 9
How do Dogecoin transaction fees work? 8
What is Dogecoin mining, and how do I begin? 7
Is there a way to tip videos on youtube with dogecoin? 4
Is there a limit on how many Dogecoins can ever be mined/exist? 3
What price would dogecoin need to be in order for the mining rewards to cover the cost of electricity? 3
What is "sweeping" from one wallet to another and why is it important? 1
How can Dogecoin avoid the long transaction wait times and high fees that Bitcoin is currently experiencing? 1
What is the best (most efficient) way to mine Doge? 1
How do I set up Dogecoinfold? 1
What are three reasons to use Dogecoin that the average, non-technical user would find compelling? 1
Is it possible to have two Dogecoin core wallets running on the same computer at the same time? 1
Is there a roadmap for Dogecoin's future? 0
Who are the devs? 1
What exactly is a shibe? 1
How can we help to boost DogeCoin as an accepted Currency? 1
Can I recover my dogecoins if I accidentally have deleted my wallet? 1
What is it about the Dogecoin community that makes it so wow? 1
What happened to the dogecoin foundation? 0
Who owns and runs the dogecoin.com website? 0
Does segregated witness implementation reduce traceability on the blockchain? 0
What is the purpose of cryptocurrency? 0
Can I mine dogecoin on my laptop? 0
What programming language is used for the dogecoin core? 0
Let's go
... to the moooon!
edit This back from Stack Exchange
User does not have to follow the proposal in order to vote on the sample questions. As the faq says, any user with 150 rep on Area 51 can downvote any example question.
So we're being sabotaged and we don't even know who is doing it... At least three people and none are followers. Such sad, very disappoint.
FWIW: https://meta.stackexchange.com/questions/297329/proposal-questions-downvoted-by-anonymous
submitted by mcsen2163 to dogecoin [link] [comments]

On the nature of 51% attacks and pronged cutlery

Sorry everyone, this one’s going to be very serious again, and I'm going to start with administrivia. First of all, a few people have mistake me for lead developer recently; I'm not, I'm just the one that’s more vocal and therefore gets attention. langer_hans is lead developer, and has been working on the coin much longer than I have.
Quick reminders of a couple of things; for new shibes getting started with the main client, you can download a blockchain bootstrap file which helps you get going faster. So Chain is hosting instructions, and copies of the bootstrap.dat are hosted by themselves and Moolah (see links on that page). We've also seen a few people asking about the 1.7 release; yes it’s out, no you don’t have to upgrade, but it does seem a lot faster to us, so we would encourage upgrading. Also there is a mailing list for announcements of upcoming client releases at https://lists.sourceforge.net/lists/listinfo/dogecoin-releases which I would recommend subscribing to.
So, yesterday lleti asked about an idea to see if there was community support for it. A developer asking does not mean something is going to be done. Even if it was done, it does not mean you have to follow (I’ll talk about that in a moment). Feedback to date has been overwhelmingly negative, though, so consider the idea abandoned.
A few people asked have why the idea was suggested; the intent would be to remove sharp shocks from the mining schedule, and spread it over a longer period of time in order to give adoption of Dogecoin a chance to catch up. One thing I'm not sure was clear was that there was consideration of changing block time to reduce the resulting inflation. As said, we’re not seeing community support for it.
Talking of adoption; /dogecoin has just ticked over 87,000 subscribers. Some Dogecoin users don’t read the subreddit, some subreddit readers don’t use the coin, but lets use that as an estimate for user base. That’s huge for a coin that’s 6 months old, and tiny in terms of an Internet service. And it’s worth remembering Bitcoin is 5 years old, Litecoin 2 years. Peercoin, almost 2 years. That’s the coins we’re in the midst of right now. The developers are cautious of making big technical changes because we want to stabilise the coin so the more cautious companies can know the coin is rock solid, and encourage them to get involved.
So, everyone’s been all about the price this week, and while I hate talking price with you guys, I need to as background on a lot of other stuff. So, the DOGE/BTC price is down, yes. DOGE/USD also a bit, but much less. DOGE/DOGE still solid, though. We’re Dogecoin, though, the price shouldn't matter… well, agreed, but it’s worrying people, and in particular there’s a lot of people worrying the price drops will lead to a 51% attack. So lets talk about 51% attacks, and lets also talk forks.
A 51% attack is where someone gains control of over 50% of the hashrate of the network, and maliciously uses that hashrate to make their own private blockchain which grows faster than the default blockchain. The malicious part is really important here; it’s an attack, not something that happens accidentally. In doing this, they can spend money on the current blockchain, then release their private blockchain. The network sees the longer blockchain and moves to it as part of the fork handling code (note the fork, it’s important). This effectively reverses the spending of Dogecoin that they’ve done.
Note that this is only really an attack on exchanges, as the attacker has to get their Dogecoin into another form (i.e. Bitcoin) before the transaction reverses, or the whole thing has no effect. So far, no exchange has communicated any serious concern about a 51% attack on Dogecoin to myself, and I am unaware of them having done so to any other developer.
The concern over price is raised because as Dogecoin rewards per block diminish over time (which they continue to do for the next 6 months or so), the payments to miners become less valuable (in USD/BTC terms) unless the price goes up. Many of our miners are here to support the coin (with thanks to /DogecoinDefenseForce), but some are just here for the money, and people worry that losing them will make it easy to 51% attack the coin.
So how does one a get enough mining power to 51% attack a coin? I mean, our hashrate is in the 40-50GH/s range, how do you get 51% of that (or more, if it’s a group not currently mining us)? Well, a hacked mining pool is the main scenario that worries people; it’s considered unlikely any mining pool would decide to attack their own funding source (and the big pools are making big money through entirely legal means). When Bitcoin had the same problem back in January, there was a major push to adopt what is called p2pool, which is a distributed alternative to conventional mining pools. There’s been a few issues with p2pool and Dogecoin which is part of why it’s not more widely used, but I’d really like to see more people looking at it, and talk to the developers about what (if anything) it needs for wider adoption. Ideally I’d like to get all new miners picking up p2pool, so if anyone wants to help with tutorials that would be awesome.
A number of other ideas (apart from p2pool adoption) have been proposed; change proof of work, change to proof of stake now, change to proof of stake later, merged mining, multi-protocol mining… all of these have something in common, they require that we fork the coin.
Now, a deliberate planned and controlled fork is quite different to a 51% attack fork, but that does not mean that it’s risk free. One scenario would be a disagreement with the developers over path the coin is taking (as we’re seeing with the tapering suggestion), and the community not updating, leaving the developers on their own very small fork.
Other scenarios could include significant numbers of exchanges stuck on the wrong “prong” of the fork for an extended period of time. We've had at least one exchange get “stuck” for days or weeks on every fork so far, causing significant confusion and distress to those trying to send coins to or receive coins from the exchange. Same for merchants, who might report not receiving coins if they or the sender are on different forks.
Although unlikely, it’s also possible that the fork would introduce a serious bug. There are a number of coins which have been PoW at launch and intended to move to PoS shortly afterwards, and failed to actually switch. Certainly any such change is not without its risks.
Lastly, on a personal note, I'm going to be focusing primarily on co-ordination and communication from here on in, rather than working on the code base directly. I’d like to give a shout-out to our many other developers, there are far too many people now involved to name them all, but langer_hans as lead developer, leofidus-ger, patricklodder have all worked extensively on the 1.7 client. Go give them a hug! If any of the community want to get involved with development, please do swing by #dogecoin-dev on IRC Freenode and we can help get you started.
submitted by rnicoll to dogecoin [link] [comments]

[Quick guide] Run a full node with btcd (an alternative to bitcoin-core) on debian

It's good to run a full node, and even better to run one with an alternative implementation to bitcoin-core.
I was surprised how easy it is to install btcd (conformal's alternative implementation of a full node). I was also surprised how little bandwidth a full node uses. This quick guide will get you up and running.
To use this method you will need debian testing (Jessie) because the version of golang on debian stable is too old. However, the binary produced will run on debian stable. You will need about 25GB free to store the blockchain, with an extra 20GB or so if you use the bootstrap.dat torrent.
Probably the same instructions will work on ubuntu (but using sudo instead of root).
INSTRUCTIONS TO RUN A FULL NODE WITH BTCD
On debian testing the steps are:
1 - as root, do
# aptitude update; aptitude install golang mercurial git 
2 - pull in and compile btcd and associated utilities as normal user,
$ mkdir btcd; cd btcd; export GOPATH=$(pwd); $ go get github.com/conformal/btcd/... 
3 - run your node
$ cd bin $ ./btcd --externalip=YOUREXTERNALIP 
(where YOUREXTERNALIP is your external IP address).
4 - on your router, forward port 8333 to the computer your node is running on. Once your node is running, check the port is open with a tool such as canyouseeme.org
5 - enjoy being part of the network!
OPTIONAL STEP A (to download the blockchain faster, to be run before step 3):
A1 - download Jeff Garzik's torrent to bootstrap the blockchain or the magnet link, magnet:?xt=urn:btih:36719ba2cecf9f3bd7c5abfb7a88e939611b536c&dn=bootstrap.dat&tr=udp%3A%2F%2Ftracker.openbittorrent.com%3A80&tr=udp%3A%2F%2Ftracker.publicbt.com%3A80&tr=udp%3A%2F%2Fcoppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.com%3A1337&tr=http%3A%2F%2Fbttracker.crunchbanglinux.org%3A6969%2Fannounce (discussion here)
A2 - run as normal user,
$ ./addblock -i /whatevepath/to/youtorrent/download/bootstrap.dat 
then continue to step 3.
OPTIONAL STEP B (to throttle bandwidth):
B1 - as root, do
# aptitude install trickle 
B2 - as your normal user, instead of step 3, run (where XXX is your desired upload speed limit in KB/s)
$ trickle -u XXX ./btcd 
Edits: see comments. Added note about external IP.
submitted by _supert_ to Bitcoin [link] [comments]

Lore v2 QT on Raspberry Pi

Hello,
 
To follow up to mindphuk's excellent piece on building the headless client on Raspberry Pi (https://www.reddit.com/blackcoin/comments/6gkjrw/wip_blackpi_a_stake_device_based_on_raspberry/), I thought if anyone was interested I'd show you how to get the full QT version running on the Pi on the Jessie with Pixel desktop. This works and has been soak tested for several days now on a standard Raspberry Pi 3. I have since added some coins and it stakes a handful of times a day.
 
Running staking Lore clients paves the way for some of the future use cases of BLK utilising the Bitcoin 0.12 (and newer) core tech, including colored coins. So I'm going to leave this one going indefinitely to kickstart the number of Lore clients staking. It's certainly not mandatory but it will be good in the longer term to have a nice distribution of Lore staking clients.
 
The cross-compile which lets you create binaries for multiple platforms didn't work for the QT version on the Pi, so there is more to do than just running the binary unfortunately, as below. There are folks working on some much cleaner solutions than this for the Pi, with a custom front end, and where you won't have to do any mucking about. That is coming soon. In the meantime, if you enjoy a fiddle with such things, here's how to get this QT client working on your Pi.
 
These instructions assume you are starting from scratch with a completely blank OS.
 
Download Jessie with Pixel from: http://downloads.raspberrypi.org/raspbian/images/raspbian-2017-07-05/2017-07-05-raspbian-jessie.zip
 
Note they have since (August 2017) released a version called 'Stretch' which does not work with this guide. I'll see if I can come up with something new for that at some point and link to it here when I have. In the meantime the guide should work with the Jessie image above.
 
Unzip the file and extract the .img file to burn it onto Fresh SD card to boot from (to be safe, use 16GB or larger), using a tool like win32diskimager or Etcher.
 
Assuming you have keyboard/mouse and monitor plugged into your pi, boot it up and the Jessie Desktop will show.
 
Before we do anything else, you should increase the default swap size on the pi, as compiling certain libraries can exhaust the RAM and get stuck otherwise. To do this, launch a Terminal window and type:
 
sudo nano /etc/dphys-swapfile 
 
and Change the CONF_SWAPSIZE from 100 to:
 
CONF_SWAPSIZE=1024 
 
Exit nano with control + x to write out the file.
 
Then, run the following to restart the swapfile manager:
 
sudo /etc/init.d/dphys-swapfile stop sudo /etc/init.d/dphys-swapfile start 
 
Now, launch the browser and download the Lore 2.12 binaries for ARM here: https://mega.nz/#!k2InxZhb!iaLhUPreA7LZqZ-Az-0StRBUshSJ82XjldPsvhGBBH4 (Version with fee fix from 6 September 2017)
 
(If you prefer to compile it yourself instead, it is possible by following the instructions in the original article by Mindphuk just taking into account this is the newer version of the Lore client than when that was written (https://github.com/janko33bd/bitcoin/releases) and the versions of Boost and the Berkeley DB need to be the same as below.)
 
Double click the zip and extract the Lore binary files. Yes, at the moment they are all called 'bitcoin', not 'blackcoin' or 'Lore' - this is because the code derives from a recent bitcoin core implementation so this has not yet been updated. You can place these wherever you like.
 
In the Terminal window, change directory to where you put the binaries, e.g.:
 
cd Downloads/lore-raspberrypi-armv7-jessie-pixel chmod +x * 
 
That marks the binaries as executable.
 
Now, we need the Boost libraries installed for any of the Lore binaries to work. The project was done with Boost 1.62.0. Unfortunately the Jessie repository only goes up to 1.55, so we need to download and build 1.62 manually on the device.
wget https://sourceforge.net/projects/boost/files/boost/1.62.0/boost_1_62_0.tar.gz/download tar -xvzf download cd boost_1_62_0 sudo ./bootstrap.sh sudo ./b2 install 
 
(This will take almost 2 hours. Have a nice cup of tea and a sit down.)
 
When I came to run the binaries, I found they couldn't find Boost. Running this command fixes that:
sudo ldconfig 
 
Now we are going to install the packages which aren't already included in the default OS installation which the binaries need in order to run:
sudo apt-get install qrencode libprotobuf-dev libevent-pthreads-2.0-5 
 
Now we need to install the Berkeley Database version 6.2.23. This is the version Lore v2 uses. Bitcoin still uses 4.8 which is 10 years old! This doesn't take too long.
wget http://download.oracle.com/berkeley-db/db-6.2.23.tar.gz tar -xvzf db-6.2.23.tar.gz cd db-6.2.23/build_unix ../dist/configure --prefix=/usr --enable-compat185 --enable-dbm --disable-static --enable-cxx 
 
I find this next section of the Berkeley instructions worked better just switching to root, which can be fudged by running sudo su before the rest:
sudo su make make docdir=/usshare/doc/db-6.2.23 install chown -v -R root:root /usbin/db_* /usinclude/db{,_185,_cxx}.h /uslib/libdb*.{so,la} /usshare/doc/db-6.2.23 
 
Now we're going to go up a couple of directories to where the binaries were:
cd ../.. 
 
Then run the client!
./bitcoin-qt 
 
And there you have it. Should hopefully end up looking a bit like this: http://imgur.com/a/eEHGa
 
Using the Bootstrap can save a while syncing. Download it at: https://www.reddit.com/blackcoin/comments/6b3imq/blackcoin_bootstrapdat_up_to_block_1631800
 
Place the bootstrap.dat file into the ~/.lore directory.
 
Run ./bitcoin-qt again, it will say 'Importing Blocks' rather than 'Synchronising with Network'. My pi sync'ed fully in about 5-6 hours.
 
If you want peace of mind that Lore will always start on bootup into the Jessie w/Pixel desktop (i.e. after a power cycle), then you need to create a .desktop file in the following place.
sudo nano ~/.config/autostart/Lore.desktop 
 
And in it, enter the following (tailoring the Exec line below to the whereabouts of your bitcoin-qt file):
[Desktop Entry] Name=Blackcoin Lore Comment=Mining without the waste Exec=/home/pi/Downloads/lore-raspberrypi-armv7-jessie-pixel/bitcoin-qt Type=Application Encoding=UTF-8 Terminal=false Categories=None; 
 
Power usage and payback time
 
After a good while leaving it going by itself, the CPU load averages got down to almost zero, all of the time. Idling, the Pi uses a bit less than 3 watts. This means it would take two weeks to use one 1Kw/h of electricity.
 
If you pay e.g. 12.5 cents a unit, that's what you'd expect this to cost to run in a fortnight. That's around $0.25 a month or $3 a year. Green and cheap and helping to secure the BLK network. I paid for the year's worth of electricity in 2 days staking with 25k BLK. Makes mining look silly, huh? ;)
 
Securing your Pi
 
With staking, your wallet needs to be unlocked and as such, the keys to your wallet are on the device. In a clean and newly installed environment as described above, and if you don't allow others to use your device and there is no other software or nasties running on it, there is no real cause for concern. However, there are some basic security precautions you can take.
 
Firstly, if you have enabled SSH and are playing with your pi across your LAN (or worse, the Internet), you should immediately change the password for the default 'pi' user (which is preconfigured to be 'raspberry'). Simply log in as normal, then type:
 
passwd 
 
You'll be prompted to enter the old and the new passwords.
 
Security by default
 
Your Pi is likely, by default, to not be exposed to incoming connections from the outside world because your router is likely generating a private address range for your LAN (192.168.x.x or 10.0.x.x or 172.x.x.x) which means all incoming connections are effectively blocked at the router anyway unless you set up a 'port forward' record to allow packets arriving on certain ports to be forwarded to a specific internal IP address.
 
As for accessing your Pi across the internet, if you have set up a port forward, this likely has security ramifications. Even basic old fashioned protocols have proven in recent times to have uncaught flaws, so it's always advisable to lock down your device as much as possible, and even if you only plan to access the Pi over your LAN, install a firewall to configure this. I used one called ufw, because it's literally an uncomplicated firewall.
 
sudo apt-get install ufw sudo ufw allow from 192.168.0.0/16 to any port 22 sudo ufw --force enable 
 
This allows just port 22 (SSH) to be open on the Pi to any device on my LAN's subnet (192.168.0.x). You can change the above to a single IP address if paranoid, or add several lines, if you want to lock it down to your LAN and a specific external static IP address (e.g. a VPN service you use). To find out what subnet your router uses, just type:
 
ifconfig 
 
and you'll see on the interface you are using (either hard wired or wifi) the 192.168 or 10. or 172. prefix. Change the above rule so it matches the first two octets correctly (e.g. 10.0.0.0/16 if you're on a 10.0. address).
 
You may already use VNC to access your Pi's desktop across your LAN, this uses port 5900. Add a line like above to lock it down to an internal address. It's not a good idea to expose this port to the wider world because those connections are not encrypted and potentially could be subjected to a MITM attack.
 
You can query the status of the firewall like this:
ufw status 
 
And of course, try connecting remotely once you change the rules to see what works. You should consult the official documentation for further options: https://help.ubuntu.com/community/UFW
 
Back up & Recovery
 
There are again many ways to tackle this so I'll just speak about my basic precautions in this regard. Don't take it as a be-all-and-end-all!
 
The wallet.dat file is the key file (literally) containing all the private/public keys and transactions. This can be found in:
 
~/.lore 
 
You can navigate there using Jessie w/Pixel's own file manager or in a terminal window (cd ~/.lore). You can copy this file or, if you'd rather keep a plain text file of all your public and private keys, use the 'dumpwallet' command in the console. In Lore, go to Help > Debug Window > Console and type 'dumpwallet myfilename' where myfilename is the file you want it to spit out with all your keys in it. This file will end up in the same place you launch bitcoin-qt from.
 
The instructions earlier on, when running Lore for the first time intentionally left out encrypting your wallet.dat file because in order for the wallet to stake upon startup, it needs to have a decrypted key already. This isn't perfect, but after a power cycle, it would never stake unless you left it decrypted. So the best practice here is as soon as the wallet.dat file has left your device, i.e. you copy it to a USB stick for example, put it in an encrypted folder or drive (or both).
 
In Windows, one way is to use Bitlocker drive encryption for the entire drive. You should follow the instructions here to encrypt your flash drive before your wallet.dat is on there, and don't forget the password!!
http://infosec.nmsu.edu/instructions-guides/how-to-enable-bitlocker-to-go-for-external-hard-drives-and-usb-flash-drives/
 
On the Mac, I use a software package called Concealer to encrypt files I store on the Mac itself: http://www.belightsoft.com/products/conceale   There are almost certainly free packages with similar functionality, I have just used that one for years.
 
Either way, if you want to just make sure your USB drive is encrypted, you can do so in one-click in Finder before you put the sensitive files on it: http://lifehacker.com/encrypt-a-usb-stick-in-finder-with-a-click-1594798016
 
Note that these disk encryption methods may mean having to access the USB stick on a PC or Mac in order to retrieve the files in the event of a disaster. Be aware this may mean exposing them to more security issues if your computer is in any way compromised or someone nefarious has access to your computer. There are more 'manual' ways of backing up and recovering, such as literally writing down private/public key pairs which this guide doesn't go into, but may suit you better if paranoid about your setup.
 
Recovery
 
The wallet.dat file has everything in it you need to recover your wallet, or if you used 'dumpwallet', the file you saved out has all the keys.
 
Wallet.dat method: Install Lore as normal then replace any auto-generated wallet.dat in ~/.lore directory with your backup. If a lot of time has elapsed and many transactions have occurred since your backup, launch lore with:
./bitcoin-qt -rescan 
 
And if that doesn't do the job, do a full reindex of the blockchain:
 
./bitcoin-qt -reindex 
 
If you used the dumpwallet command, install Lore then place the file containing all the keys that you saved out in the same directory as bitcoin-qt. In Lore, go to Help > Debug Window > Console and type 'importwallet myfilename' where myfilename is that file containing all the keys. The wallet should automatically rescan for transactions at that point and you should be good to go.
 
There are a million ways to do effective security and disaster recovery, but I hope this shows you a couple of basic precautionary ways. There are discussions about better ways to stake without compromising too much security which are happening all the time and developments in this regard will happen in time.
 
In the meantime, feel free to comment with your best practices.
 
submitted by patcrypt to blackcoin [link] [comments]

[Wallet] Official Release - Reddcoin Core v2.0.0

Dear Reddheads:
I am pleased to announce that the new v2.0.0 wallet is now officially released.
You can download pre-compiled binaries directly from our (https://github.com/reddcoin-project/reddcoin/releases/tag/v2.0.0.0) account. Or if you prefer, you can compile directly from source.
Reddcoin 2.0.0 is a complete rebuild based off Bitcoin 0.9. This means in terms of the code-base we have introduced all the Bitcoin changes up to and including v0.9.5 into this version of Reddcoin Core.
Taking this path will allow faster adoption of critical fixes and features.
Within this release we have also included some features from the 0.10 bitcoin build, including a connected peers tab and visual bandwidth monitoring
We suggest to read the release notes of Bitcoin up to and including 0.9.5 to get a full understanding of the changes.
On top of the new features, Reddcoin Core v2.0.0 update contains very important security fixes and all users MUST upgrade to this version as soon as possible. Details on several vulnerabilities were made public by the Bitcoin team (Official Bitcoin warning) regarding the issues. It is particularly important that users who are staking do upgrade.
This release introduces BIP66, and version 4 blocks. Once BIP 66 is enforced, version 3 blocks will be rejected from the network entirely as they contain less secure transactions.
This means, if you are staking, you need to upgrade so that you don't risk miss out on your staking rewards
Details of other notable changes are posted on Github Releases

To Upgrade

First, Backup your existing wallet.dat and data folder
Where to find your Reddcoin data folder?
  1. Windows: C:\Users\USER NAME\AppData\Roaming\Reddcoin
  2. Mac: /Users/USER NAME/Library/Application Support/Reddcoin
  3. Linux:~/.reddcoin
Install Reddcoin Core software
  1. Uninstall your old wallet
  2. Install your new wallet
If you follow this procedure, we should be able to help you further if the need arises.
The new wallet is compatible with the old blockchain files. There is no need to re-sync from the start.
Regards
Gnasher (John)
x-posted (https://www.reddcointalk.org/topic/880/wallet-official-release-reddcoin-core-v2-0-0)
submitted by cryptognasher to reddCoin [link] [comments]

Free $10 - $xxx for anyone who has been using Bitcoin, Litecoin or Dogecoin since May.

Ok, this is a long and slightly technical post, so bear with me.
So there is this new altcoin that has been going up in price pretty fast, it's called 'CLAM'. This coin is freely distributed. They're using a distribution method that gives you 4.6 CLAMs for each Bitcoin, Litecoin or Dogecoin address you have that had an unspent output on by May (it scans the blockchain for this, I believe).
Instructions:
Currently this coin is trading at around 0.007 BTC, which is about $2.45. If you have one Bitcoin address that is 4.6*$2,45 = $11,27. If you have one BTC, LTC and DOGE address, you'll make about $33,81. If you have more computers you use cryptocurrencies on, and have multiple addresses for each wallet, you could make a couple of hundred dollars.
Personally, I got 0.6 BTC, which is about $210, by doing this. Easiest money I've ever made on the internet :)
Tips are appreciated! You can use one the following addresses: 1E5AADqAG6LjeXo6xaznoWT7ekbNGPa8wN (BTC) LVKaac2gpt5K41iqPgsg4KqaW4iUdhc3jj (LTC) DJxJtFTfTDLjVHk2t5TEL5ExDg4cgA3uq8 (DOGE)
submitted by 321eiddeg to beermoney [link] [comments]

Myriad 0.11.2

There you go, it's out there now.

TL;DR. Just give me the bits

Would be great if someone who has the skills & tools could generate us a nice stable MacOS build? Anyone?

Recommended Action

Backup your wallet before using this. You've probably already done that, as I am sure you backup your wallet on a regular basis, right?
Something bad happens, your wallet is destroyed AND you didn't take a backup? Don't blame me.

Naming

A lot of stuff has been renamed to 'Myriad' - however there are a couple of exceptions for reasons of compatibility with older existing versions:

Compilation Notes

If you are compiling yourself, please configure with something like this:
CFLAGS="-O2 -fPIC" CPPFLAGS="-O2 -fPIC" ./configure 
otherwise you'll probably get some errors later on. Additionally, if your CPU supports SSE2, and most modern CPU's do, use this:
CFLAGS="-O2 -fPIC -DUSE_SSE2" CPPFLAGS="-O2 -fPIC -DUSE_SSE2" ./configure 
That will enable the SSE2 version of the Scrypt algorithm. This may reduce the CPU load when syncing the blockchain.
Oh, and there's still some tests that fail if you build and run the testsuite. I've been unable to find the issue, so please, when you fix it, submit a pull request.

Special Thanks

A big thanks to cryptapus and 8bitcoder for their help in getting this release completed. Obviously we must also thank all of the contributors to the Bitcoin Core project, as that is the base that this is all built upon.
And again thanks to 8bitcoder for starting Myriad in the first place.

Downgrading warning

Because this release is based on Bitcoin Core 0.10.0 and upwards, it makes use of headers-first synchronization and parallel block download (see further), the block files and databases are not backwards-compatible with older versions of Myriad Core or other software:
If you want to be able to downgrade smoothly, make a backup of your entire data directory. Without this your node will need start syncing (or importing from bootstrap.dat) anew afterwards. It is possible that the data from a completely synchronised 0.11.2 node may be usable in older versions as-is, but this is not supported and may break as soon as the older version attempts to reindex.
This does not affect wallet forward or backward compatibility.

Notable changes (Borrowed from Bitcoin Core's Release Notes)

Faster synchronization

Myriad Core now uses 'headers-first synchronization'. This means that we first ask peers for block headers and validate those. In a second stage, when the headers have been discovered, we download the blocks. However, as we already know about the whole chain in advance, the blocks can be downloaded in parallel from all available peers.
In practice, this means a much faster and more robust synchronization. On recent hardware with a decent network link, it can be as little as 3 hours for an initial full synchronization. You may notice a slower progress in the very first few minutes, when headers are still being fetched and verified, but it should gain speed afterwards.
A few RPCs were added/updated as a result of this: - getblockchaininfo now returns the number of validated headers in addition to the number of validated blocks. - getpeerinfo lists both the number of blocks and headers we know we have in common with each peer. While synchronizing, the heights of the blocks that we have requested from peers (but haven't received yet) are also listed as 'inflight'. - A new RPC getchaintips lists all known branches of the block chain, including those we only have headers for.

RPC access control changes

Subnet matching for the purpose of access control is now done by matching the binary network address, instead of with string wildcard matching. For the user this means that -rpcallowip takes a subnet specification, which can be
An arbitrary number of -rpcallow arguments can be given. An incoming connection will be accepted if its origin address matches one of them.
For example:
0.9.x and before 0.10.x
-rpcallowip=192.168.1.1 -rpcallowip=192.168.1.1 (unchanged)
-rpcallowip=192.168.1.* -rpcallowip=192.168.1.0/24
-rpcallowip=192.168.* -rpcallowip=192.168.0.0/16
-rpcallowip=* (dangerous!) -rpcallowip=::/0 (still dangerous!)
Using wildcards will result in the rule being rejected with the following error in debug.log:
Error: Invalid -rpcallowip subnet specification: *. Valid are a single IP (e.g. 1.2.3.4), a network/netmask (e.g. 1.2.3.4/255.255.255.0) or a network/CIDR (e.g. 1.2.3.4/24). 

Watch-only wallet support

The wallet can now track transactions to and from wallets for which you know all addresses (or scripts), even without the private keys.
This can be used to track payments without needing the private keys online on a possibly vulnerable system. In addition, it can help for (manual) construction of multisig transactions where you are only one of the signers.
One new RPC, importaddress, is added which functions similarly to importprivkey, but instead takes an address or script (in hexadecimal) as argument. After using it, outputs credited to this address or script are considered to be received, and transactions consuming these outputs will be considered to be sent.
The following RPCs have optional support for watch-only: getbalance, listreceivedbyaddress, listreceivedbyaccount, listtransactions, listaccounts, listsinceblock, gettransaction. See the RPC documentation for those methods for more information.
Compared to using getrawtransaction, this mechanism does not require -txindex, scales better, integrates better with the wallet, and is compatible with future block chain pruning functionality. It does mean that all relevant addresses need to added to the wallet before the payment, though.

myriadcoin-tx

It has been observed that many of the RPC functions offered by myriadcoind are "pure functions", and operate independently of the myriadcoind wallet. This included many of the RPC "raw transaction" API functions, such as createrawtransaction.
myriadcoin-tx is a newly introduced command line utility designed to enable easy manipulation of myriad transactions. A summary of its operation may be obtained via "myriadcoin-tx --help" Transactions may be created or signed in a manner similar to the RPC raw tx API. Transactions may be updated, deleting inputs or outputs, or appending new inputs and outputs. Custom scripts may be easily composed using a simple text notation, borrowed from the bitcoin test suite.
This tool may be used for experimenting with new transaction types, signing multi-party transactions, and many other uses. Long term, the goal is to deprecate and remove "pure function" RPC API calls, as those do not require a server round-trip to execute.
submitted by nzsquirrell to myriadcoin [link] [comments]

As user Bitcoin has already pointed out, using a bootstrap.dat is no longer recommended—you can see the release notes for the new faster-synchronization feature here.. As a result, the bootstrap.dat torrent links were removed from bitcoin.org after a short discussion.. The bootstrap.dat file is still available here on the bitcointalk.org forum, and jgarzik has indicated that he will continue The compression format has been updated to xz which allows the decompression of the bootstrap.dat file while downloading it. If you are an expert you can use system pipes to inject the highly compressed serialized Bitcoin blockchain bootstrap.dat to the Bitcoin initial blockchain load up process. Once the wallet have copied and imported the blockchain files it will mark bootstrap.dat file as bootstrap.dat.old. This old file is no longer needed and so you can delete it. Is this file safe? Using bootstrap file for Bitcoin is not recommended as syncing directly using wallet client is much faster and robust. What is bootstrap.dat and what does it do? To speed up the process of syncing with the blockchain, a file called bootstrap.dat can be used instead of having your wallet download the blockchain block by block. The bootstrap.dat file contains the latest blockchain information needed to have your wallet synced and up-to-date. A bootstrap contains a set of files that help your wallet to pre-load the blockchain to a certain block-height. This way your wallet can skip having to download all those blocks itself.

[index] [7622] [16874] [17855] [17385] [15110] [25682] [30704] [9044] [21956] [29132]

Flag Counter