Bitcoin-Qt command line control on Mac - Bitcoin Stack

QuarkCoin Cryptocurrency

Quark is a decentralized digital monetary system. It facilitates sending Quarks to Friends, Family Members Online Payments free of charges and charge-backs. Military Grade Encryption. No Bank or Government Control. Quark coins are based on the original idea of Bitcoin but improved, more secure, faster transaction times and zero fees. With improvements to design and security. There is also a greater coin supply with higher block rewards for miners. Quark is fully Open Source.
[link]

Groestlcoin 6th Anniversary Release

Introduction

Dear Groestlers, it goes without saying that 2020 has been a difficult time for millions of people worldwide. The groestlcoin team would like to take this opportunity to wish everyone our best to everyone coping with the direct and indirect effects of COVID-19. Let it bring out the best in us all and show that collectively, we can conquer anything.
The centralised banks and our national governments are facing unprecedented times with interest rates worldwide dropping to record lows in places. Rest assured that this can only strengthen the fundamentals of all decentralised cryptocurrencies and the vision that was seeded with Satoshi's Bitcoin whitepaper over 10 years ago. Despite everything that has been thrown at us this year, the show must go on and the team will still progress and advance to continue the momentum that we have developed over the past 6 years.
In addition to this, we'd like to remind you all that this is Groestlcoin's 6th Birthday release! In terms of price there have been some crazy highs and lows over the years (with highs of around $2.60 and lows of $0.000077!), but in terms of value– Groestlcoin just keeps getting more valuable! In these uncertain times, one thing remains clear – Groestlcoin will keep going and keep innovating regardless. On with what has been worked on and completed over the past few months.

UPDATED - Groestlcoin Core 2.18.2

This is a major release of Groestlcoin Core with many protocol level improvements and code optimizations, featuring the technical equivalent of Bitcoin v0.18.2 but with Groestlcoin-specific patches. On a general level, most of what is new is a new 'Groestlcoin-wallet' tool which is now distributed alongside Groestlcoin Core's other executables.
NOTE: The 'Account' API has been removed from this version which was typically used in some tip bots. Please ensure you check the release notes from 2.17.2 for details on replacing this functionality.

How to Upgrade?

Windows
If you are running an older version, shut it down. Wait until it has completely shut down (which might take a few minutes for older versions), then run the installer.
OSX
If you are running an older version, shut it down. Wait until it has completely shut down (which might take a few minutes for older versions), run the dmg and drag Groestlcoin Core to Applications.
Ubuntu
http://groestlcoin.org/forum/index.php?topic=441.0

Other Linux

http://groestlcoin.org/forum/index.php?topic=97.0

Download

Download the Windows Installer (64 bit) here
Download the Windows Installer (32 bit) here
Download the Windows binaries (64 bit) here
Download the Windows binaries (32 bit) here
Download the OSX Installer here
Download the OSX binaries here
Download the Linux binaries (64 bit) here
Download the Linux binaries (32 bit) here
Download the ARM Linux binaries (64 bit) here
Download the ARM Linux binaries (32 bit) here

Source

ALL NEW - Groestlcoin Moonshine iOS/Android Wallet

Built with React Native, Moonshine utilizes Electrum-GRS's JSON-RPC methods to interact with the Groestlcoin network.
GRS Moonshine's intended use is as a hot wallet. Meaning, your keys are only as safe as the device you install this wallet on. As with any hot wallet, please ensure that you keep only a small, responsible amount of Groestlcoin on it at any given time.

Features

Download

iOS
Android

Source

ALL NEW! – HODL GRS Android Wallet

HODL GRS connects directly to the Groestlcoin network using SPV mode and doesn't rely on servers that can be hacked or disabled.
HODL GRS utilizes AES hardware encryption, app sandboxing, and the latest security features to protect users from malware, browser security holes, and even physical theft. Private keys are stored only in the secure enclave of the user's phone, inaccessible to anyone other than the user.
Simplicity and ease-of-use is the core design principle of HODL GRS. A simple recovery phrase (which we call a Backup Recovery Key) is all that is needed to restore the user's wallet if they ever lose or replace their device. HODL GRS is deterministic, which means the user's balance and transaction history can be recovered just from the backup recovery key.

Features

Download

Main Release (Main Net)
Testnet Release

Source

ALL NEW! – GroestlcoinSeed Savior

Groestlcoin Seed Savior is a tool for recovering BIP39 seed phrases.
This tool is meant to help users with recovering a slightly incorrect Groestlcoin mnemonic phrase (AKA backup or seed). You can enter an existing BIP39 mnemonic and get derived addresses in various formats.
To find out if one of the suggested addresses is the right one, you can click on the suggested address to check the address' transaction history on a block explorer.

Features

Live Version (Not Recommended)

https://www.groestlcoin.org/recovery/

Download

https://github.com/Groestlcoin/mnemonic-recovery/archive/master.zip

Source

ALL NEW! – Vanity Search Vanity Address Generator

NOTE: NVidia GPU or any CPU only. AMD graphics cards will not work with this address generator.
VanitySearch is a command-line Segwit-capable vanity Groestlcoin address generator. Add unique flair when you tell people to send Groestlcoin. Alternatively, VanitySearch can be used to generate random addresses offline.
If you're tired of the random, cryptic addresses generated by regular groestlcoin clients, then VanitySearch is the right choice for you to create a more personalized address.
VanitySearch is a groestlcoin address prefix finder. If you want to generate safe private keys, use the -s option to enter your passphrase which will be used for generating a base key as for BIP38 standard (VanitySearch.exe -s "My PassPhrase" FXPref). You can also use VanitySearch.exe -ps "My PassPhrase" which will add a crypto secure seed to your passphrase.
VanitySearch may not compute a good grid size for your GPU, so try different values using -g option in order to get the best performances. If you want to use GPUs and CPUs together, you may have best performances by keeping one CPU core for handling GPU(s)/CPU exchanges (use -t option to set the number of CPU threads).

Features

Usage

https://github.com/Groestlcoin/VanitySearch#usage

Download

Source

ALL NEW! – Groestlcoin EasyVanity 2020

Groestlcoin EasyVanity 2020 is a windows app built from the ground-up and makes it easier than ever before to create your very own bespoke bech32 address(es) when whilst not connected to the internet.
If you're tired of the random, cryptic bech32 addresses generated by regular Groestlcoin clients, then Groestlcoin EasyVanity2020 is the right choice for you to create a more personalised bech32 address. This 2020 version uses the new VanitySearch to generate not only legacy addresses (F prefix) but also Bech32 addresses (grs1 prefix).

Features

Download

Source

Remastered! – Groestlcoin WPF Desktop Wallet (v2.19.0.18)

Groestlcoin WPF is an alternative full node client with optional lightweight 'thin-client' mode based on WPF. Windows Presentation Foundation (WPF) is one of Microsoft's latest approaches to a GUI framework, used with the .NET framework. Its main advantages over the original Groestlcoin client include support for exporting blockchain.dat and including a lite wallet mode.
This wallet was previously deprecated but has been brought back to life with modern standards.

Features

Remastered Improvements

Download

Source

ALL NEW! – BIP39 Key Tool

Groestlcoin BIP39 Key Tool is a GUI interface for generating Groestlcoin public and private keys. It is a standalone tool which can be used offline.

Features

Download

Windows
Linux :
 pip3 install -r requirements.txt python3 bip39\_gui.py 

Source

ALL NEW! – Electrum Personal Server

Groestlcoin Electrum Personal Server aims to make using Electrum Groestlcoin wallet more secure and more private. It makes it easy to connect your Electrum-GRS wallet to your own full node.
It is an implementation of the Electrum-grs server protocol which fulfils the specific need of using the Electrum-grs wallet backed by a full node, but without the heavyweight server backend, for a single user. It allows the user to benefit from all Groestlcoin Core's resource-saving features like pruning, blocks only and disabled txindex. All Electrum-GRS's feature-richness like hardware wallet integration, multi-signature wallets, offline signing, seed recovery phrases, coin control and so on can still be used, but connected only to the user's own full node.
Full node wallets are important in Groestlcoin because they are a big part of what makes the system be trust-less. No longer do people have to trust a financial institution like a bank or PayPal, they can run software on their own computers. If Groestlcoin is digital gold, then a full node wallet is your own personal goldsmith who checks for you that received payments are genuine.
Full node wallets are also important for privacy. Using Electrum-GRS under default configuration requires it to send (hashes of) all your Groestlcoin addresses to some server. That server can then easily spy on your transactions. Full node wallets like Groestlcoin Electrum Personal Server would download the entire blockchain and scan it for the user's own addresses, and therefore don't reveal to anyone else which Groestlcoin addresses they are interested in.
Groestlcoin Electrum Personal Server can also broadcast transactions through Tor which improves privacy by resisting traffic analysis for broadcasted transactions which can link the IP address of the user to the transaction. If enabled this would happen transparently whenever the user simply clicks "Send" on a transaction in Electrum-grs wallet.
Note: Currently Groestlcoin Electrum Personal Server can only accept one connection at a time.

Features

Download

Windows
Linux / OSX (Instructions)

Source

UPDATED – Android Wallet 7.38.1 - Main Net + Test Net

The app allows you to send and receive Groestlcoin on your device using QR codes and URI links.
When using this app, please back up your wallet and email them to yourself! This will save your wallet in a password protected file. Then your coins can be retrieved even if you lose your phone.

Changes

Download

Main Net
Main Net (FDroid)
Test Net

Source

UPDATED – Groestlcoin Sentinel 3.5.06 (Android)

Groestlcoin Sentinel is a great solution for anyone who wants the convenience and utility of a hot wallet for receiving payments directly into their cold storage (or hardware wallets).
Sentinel accepts XPUB's, YPUB'S, ZPUB's and individual Groestlcoin address. Once added you will be able to view balances, view transactions, and (in the case of XPUB's, YPUB's and ZPUB's) deterministically generate addresses for that wallet.
Groestlcoin Sentinel is a fork of Groestlcoin Samourai Wallet with all spending and transaction building code removed.

Changes

Download

Source

UPDATED – P2Pool Test Net

Changes

Download

Pre-Hosted Testnet P2Pool is available via http://testp2pool.groestlcoin.org:21330/static/

Source

submitted by Yokomoko_Saleen to groestlcoin [link] [comments]

Issue upgrading my bitcoin node

Hello,
I'm trying to update my current node (v0.18.1.0). I'm running my node on Mac using an external HD.
Everything is on my HD except for the bitcoin.conf file and the Bitcoin Core icon in my Applications folder.
I was able to launch my node using the icon on my Application folder (bitcoin-qt) or using the command line (bitcoind)
Since I downloaded the new version (v0.19.0.1), I have the following issue:
When I launch my node using the icon on my Application folder (bitcoin-qt) everything is fine and the new version is running (using the data in my external HD), but when launch the node using the command line (bitcoind), it still launch the old version.
Is there a separate update from bitcoind? I've done some research online but I didn't find anything helpful.
Thank You!!!
***EDIT***
I have downloaded "bitcoin-0.19.0.1-osx64.tar.gz" which include the executable for bitcoind, bitcoin-cli, etc and replace the old ones by the new ones and everything looks fine!
submitted by germmmmmm to Bitcoin [link] [comments]

Gridcoin Leisure Update 3.7.14.0 Released

Today we have a new leisure update for you. This version includes a lot of "under the hood" changes, but there are some improvements for the average user as well.
 
Notably this release includes a better time to stake calculation method, thanks to @jamescowens. Also the Neural Network runs much smoother thanks to many optimizations by @ifoggz.
 
Download the update from GitHub here.
The Windows MSI can be downloaded here.
 
Full Release Notes:
Added
 
Changed
 
Fixed
 
Removed
 
Thank you to all the developers who contributed to this release. I will update this post when the Windows MSI has been uploaded to the website.
submitted by barton26 to gridcoin [link] [comments]

Run a 0.14 Full-Node on RaspberryPi3 Pruned(less than 16GB SD needed)

Hi!
Happy if this guide helps you.
Tip if you want: 19656Uwdwko5RjtnuwQENpjBwE3ChzD59v
UPDATE 04/06/17
Add 'uacomment=UASF-SegWit-BIP148' into your bitcoin.conf if you want to signal UASF.
UPDATE 03/13/17
ADDED a tl;dr; Version at the end of this Post.
UPDATE 03/12/17:
Just to test it - I reinstalled all on 8GB SD and it works as well. But maybe you should use at least 16GB for the beginning.
Using a 128GB card for the first version was a little bit stupid - so I reinstalled everything on a 8GB SD card. Including Linux and a pruned blockchain - and it works.
I used prune=550 and Jessie Lite (headless / command line) - without wallet and gui.
The SD is almost full, but it works so far
I also updated the whole manual a bit to make things more clear. Thank you for all your feedback!
Just started my Bitcoin Node today and wanted to share the way I did it with people who are interested in running their own full node. It took some time to write everything down - hopefully correct so far.
I am sure, many people around bitcoin are way more informed and educated as I am - I am the noob. So I wrote this manual to help users like me - noobs, to get started with a cheap, simple bitcoin node on raspberry pi.
Have fun!
I wanted to get my Raspberry Pi 3 working as a node to support the network. Actually the process of installing and running the node was more or less easy - but for Noobs (like I am) it might be a bit tricky to start the whole thing, because there are different ways.
Did you - like me - think you would need +120GB on the raspi, external USB HDD to be a full node? You won't!
If you have a Raspberry and you know what Bitcoin is, I guess, you are a little bit aware of linux, networks and of course bitcoin - so I won't go into detail too much.
This guide is just a little helper to get a full node running on your raspberry pi. Thanks to the help of the nice people in this sub and of course the documentation by the developers, I got it working - and of course also special thanks to raspnode.com - as I followed their tutorial to start - I went some other ways here and there - so please read carefully.
For the Part 2 I would suggest to have http://raspnode.com/diyBitcoin.html open and read through my manual.
I split the tutorial in 2 Parts - PART ONE is about installing the client on your PC and downloading the Blockchain.
PART TWO is about the setup of the raspberryPi and transferring the pruned blockchain to the pi and run it as a full node!
The first thing to be aware of is: You actually need to download the whole blockchain to get this working - if you already have your bitcoin client synced on the PC / MAC great you can reuse it!
Now you might think "but you said less than 16GB in the title!"
Yes, but the good thing is you won't need to download it on your Raspberry, neither you need to sync it completely on your raspberry which took ages (weeks!) before. When you finished this Guide, you will just have a max. 4GB Blockchain on your Raspberry Pi - but it still is a full node! The magic word is Pruning.
Maybe even a 8GB SD Card works just fine including Linux (jessie lite)!
So, if you already have a full node on your PC - Great you can almost skip PART ONE - BUT have at how to Prune in PART ONE if you don't know about it.
For PART TWO you'll need a Raspberry Pi 2 or 3 (I used 3) min. 8GB (works also) or better 16GB SD Card. (I used a 128GB for the first version of this manual - which is way too big)

PART ONE

This is the manual how to get started on you PC / MAC / Linux (I did it on Win7)
Go to: https://bitcoin.org/en/download and download the core Client for your Machine (I used win64).
Install it and configure it to save the Blockchaindata to the directory of your choice - so instead getting 120GB on your C drive, I would suggest to download it to another place like a USB drive.
You can set this up during the install. Standard folder for the blockchain folder is "%APPDATA%\Bitcoin" on Windows.
or you can do it after the install by creating a bitcoin.conf file inside your installation folder / or %APPDATA%\Bitcoin and add
datadir=l:\yourfolder
to the file. Line by line.
By the way here you could also just add dbcache - to use more memory to speed up the process a bit:
dbcache=4096
if you don't want to use the settings inside the program. (you can also set this inside the program under settings! If you have this inside the bitcoin.conf you will see the amount you set there from inside the program - it overrides the values)
You can check inside the windows client under settings, if you can see a manual dbcache is set by having a look at the left footer area. When your dbcache value shows up, everything is fine.
So the Blockchain download process will take time - maybe a few days! Depending on your machine, internet connection and HDD.
The Blockchain is huge as it contains every single transaction of the past until today. You won't need to keep your PC running all the time, you can turn it off and on and it will resync automatically when you start bitcoin-qt.exe!
Make sure to close the client always via "quit" - ctrl+q.
After you have your bitcoin core installed, the blockchain downloaded and synced - you are ready to PRUNE!
First - close the Client and let it close smoothly. After it is really closed you can follow these steps:
By pruning, your blockchain will dramatically shrink. From 120GB to just a few GB.
Be aware, that you will lose your Downloaded Blockchain as pruning will erase a big chunk of it! If you have enough space, you could of course keep the full blockchain saved somewhere on another HDD.
You can prune by editing your bitcoin.conf file by adding:
prune=550
I used prune=1024 - not sure where the differences are right now (min. prune=550). (for my 8GB version I used 550! I suggest to use this.)
Save the bitcoind.conf file and restart your windows client.
It will now clean up the Blockchain. So just the latest blocks are saved. The client should start without any problems. Maybe it takes some time to prune the blockchain data.
Check if everything works normally (the client opens as usual, you can see an empty wallet) than close the client.
Inside the Bitcoin Folder, you'll find two folders called:
blocks chainstate
those are the interesting folders containing the important data (now pruned) - and we will transfer those two to the raspberry later!
Now you are good to start the raspi transfer explained in the next part.

PART 2

Here is what I did:
1) I installed Raspian Pixel (https://www.raspberrypi.org/downloads/raspbian/) using a 128 GB SD - which is not needed because of "Pruning" - I think a 16GB card might work, too! (You can also install Raspian Jessie Lite - which saves you even more space, as it runs headless - only command line) (Updated: It is better to use Jessie Lite to save a lot of space - when you are fine with only command line)
2) I followed partly this tutorial to get everything running and setup:
http://raspnode.com/diyBitcoin.html
Please have a look at it - I have copied the Headlines in capitals to let you know what I did, and what I skipped.
On Tutorial Page: Start with RASPBIAN (OPTIONAL) CONFIG OPTIONS.
Set You RasPi up including "EDITING FILES" to save your Layout at the tutorial page and come back here.
I skipped the CONFIGURE USB AND SET AUTOMOUNT process, as we are going to use PRUNING to reduce the 120GB to a tiny filesize - so USB Devices are not needed here!
It was necessary to ENLARGE SWAP FILE to install bitcoin core - otherwise it didn't went through which ended in a frozen raspi.
So have a close look by following the raspnode tutorial at: ENLARGE SWAP FILE.
I have my raspi running via cable to router - but you can also WiFi setup everything described under NETWORKING ON THE RASPBERRY PI.
Now comes the interesting part: Follow the steps at DOWNLOADING BITCOIN CORE DEPENDENCIES - they work fine for 0.14.0 too. Git should be on Board already when you installed Pixel - otherwise you would need to install it.
sudo apt-get install git -y (only jessy lite)
I skipped the next command lines - as I don't use bitcoin-qt wallet. If you want to use it as wallet - do the step.
mkdir ~/bin cd ~bin
Now you are in the folder you want your bitcoin core data be downloaded to via git. I didn't Downloaded the Berkeley Database source code - so I also skipped the whole next command lines
[email protected]~/bin$ wget http://download.oracle.com/berkeley-db/db-4.8.30.NC.tar.gz [email protected]~/bin$ tar -xzvf db-4.8.30.NC.tar.gz [email protected]~/bin$ cd db-4.8.30.NC/build_unix/ [email protected]~/bin/db-4.8.30.NC/build_unix$ ../dist/configure --enable-cxx [email protected]~/bin/db-4.8.30.NC/build_unix$ make -j4
and went on with "INSTALLING BITCOIN"!
I followed the first part but instead downloading 0.13 I took of course the latest version:0.14
git clone -b 0.14 https://github.com/bitcoin/bitcoin.git cd bitcoin ./autogen.sh
this might take some time to start.
If you have trouble with hanging RESOLVING DELTAS - just restart the Raspberry Pi and remove the bitcoin folder inside /~bin using
rm -rf bitcoin
this command will delete the folder and you can reuse
git clone -b 0.14 https://github.com/bitcoin/bitcoin.git

For some reason RESOLVING DELTAS is a common problem with different downloads - so just retry it and at least after 3 times it should work!

as I didn't use the GUI/ Wallet, I ran
./configure --enable-upnp-default --disable-wallet
as I don't need the wallet functionality.
I didn't need to use "MAKE" which saves you maybe up to 2.5 hours.
instead you can just go ahead with:
sudo make install
(If I am wrong in doing so - please let me know)
The install takes some time - and just a heads up: when it gets stuck somewhere - just redo the installation process - it took three times to went through - stuck at some processing.
After the installation took place you can finally get your Raspberry Pi Node running in no time!
To test if the the installation went through - you can just start bitcoind using:
bitcoind &
than check if everything is working so far:
bitcoin-cli getinfo
after a few seconds you should see version: etc...
if not, something went wrong. Try to redo the steps in the raspnode tutorial.
(don't give up if it failed - retry! Ask your questions here)
IMPORTANT: you need to stop bitcoin on your raspberry now!
bitcoin-cli stop
If you don't need an external USB Drive - what I hope - as we are going to use pruning just go ahead and skip the USB part and create a file inside (or follow the raspnode tutorial on how to setup the USB drive):
cd .bitcoin
sudo nano bitcoin.conf
and enter the exact same pruning size you have used on your Desktop Machine to prune. I used 1024 but the minimum is 550. (used 550 for the 8GB SD card on PC and Raspberry)
prune=550
That's it for the raspi.
update: To signal UASF enter in a new line:
uacomment=UASF-SegWit-BIP148

TRANSFER

Now you have to transfer the two folders CHAINSTATE and BLOCKS from your PC bitcoind directory to your raspberry.
I am using a program called "WINSCP" - it is free and easy to use: https://winscp.net/eng/download.php
We need this to transfer the files to the Raspberry pi. Pretty sure you can also do it via SSH - but I am the noob. So let's keep it simple.
Open Winscp and put in the IP Address of your Raspberry Pi, User and Password (same as in SSH)
You should now see the directories on your Raspberry Pi. There is a folder called
.bitcoin
enter it and you will see the two folders
blocks & chainstate
you can delete them on the raspberry as they have some data from your previous test inside.
Make sure you can also see the bitcoin.conf file in that directory, which needs to contain the exact same prune line, like the one on your desktop machine. If not, make sure to edit it via SSH. The line "datadir=l:\yourfolder" is obviously not needed in the Raspberry bitcoin.conf file.
Now grab the two folders CHAINSTATE and BLOCKS from your PC and copy them to your .bitcoind folder.
I also copied banlist.dat, fee_estimation.dat, mempool.dat and peers.dat to the folder - not really knowing if needed! Not needed.
The whole copy process might take some minutes (against some weeks in the old way).
After copying is finished, you can now start bitcoind on the Raspberry.
bitcoind &
the & symbol let you still use the command line while the process is running btw.
The process - if succesfull - will take some time to finish.
bitcoin-cli getinfo
Will give you some informations what is going on right now. When you can see, that it is checking the blocks, this is good!
If you get an error - double check - if you have the correct prune size (same as on desktop machine) - in bitcoin.conf and that this file is inside .bitcoin on RaspberryPi. It took me some time, to find my mistakes.
Congrats! You are almost a part of the network!
To make your node now a fullnode, you will need to go to your router (often 192.168.1.1) and enable portforwarding for your raspberry pi - and open ports 8333 - that's it!
You can now go to: https://bitnodes.21.co/nodes/
scroll down to "JOIN THE NETWORK" and check check if your node IP is connected!
It will show up as soon as the blocks are checked and the raspi is running.
Well done!
Now you are running a full node, with a small Blockchain and got it working in Minutes, not weeks!
I really hope, my little tutorial worked for you and your are part of the Node network now.
If you have problems or I made a mistake in this helper tut, just let me know and I will try to make it better.
Have fun and NODL!
the noob
tl;dr; (if you are a real noob start with the non-tl;dr version!)
tl;dr; PART ONE
1) Download & install / setup bitcoincore @ https://bitcoin.org/de/download
2) change dbcache to something smaller than your memory and download the whole Blockchain (120GB).
3) create a file called bitcoin.conf put the line prune=550 (or higher) in to activate pruning on win inside %appData%/bitcoin
4) Open ports 8333 on your Router to make this a full node with a smaller Blockchain.
You are running a full node on your PC.
tl;dr; PART TWO
1) Install jessie lite and the needed dependencies on your SDCard - Raspberry
( >git clone -b 0.14 https://github.com/bitcoin/bitcoin.git )
  • see tutorial for more info.
2) create a file called bitcoin.conf inside .bitcoin and add the same prune=Number you had on your PC.
3) transfer the pruned folders BLOCKS and CHAINSTATE to the Raspberry Folder .bitcoin
4)Start "bitcoind &"
5) let everything sync
6) Make sure you have port 8333 opened on your router.
You are running a full node on your Raspberry with a super small Blockchain (I put all on a 8GB SDcard)
Tip if you want : 19656Uwdwko5RjtnuwQENpjBwE3ChzD59v
updated 03/12 - will update more, soon.
updated 03/12.2 - I updated the whole process a bit and also added some improvements.
updated 03/14/ Added a tl;dr version at the end.
submitted by I-am-the-noob to Bitcoin [link] [comments]

such beginner shibe thread wow how to get coin

 how to shibecoin v rich in minutes much instruct so simple any doge can do 

START HERE

UPDATE 1/21/14: I'm not updating this guide anymore. Most of the steps should still work though. See the wiki or check the sidebar for updated instructions.
Before you do anything else, you need to get a wallet. Until there's a secure online wallet, this means you need to download the dogecoin client.
Now open the client you just downloaded. You'll be given a default address automatically, and it should connect to peers and start downloading the dogechain (aka blockchain in formal speak). You'll know because there will be a progress bar at the bottom and at the lower right there should be a signal strength icon (TODO: add screenshots).
If you've waited 2 or 3 minutes and nothing is happening, copy this:
maxconnections=100 addnode=95.85.29.144 addnode=162.243.113.110 addnode=146.185.181.114 addnode=188.165.19.28 addnode=166.78.155.36 addnode=doge.scryptpools.com addnode=doge.netcodepool.org addnode=doge.pool.webxass.de addnode=doge.cryptopool.it addnode=pool.testserverino.de addnode=doge.luckyminers.com addnode=doge.cryptovalley.com addnode=miner.coinedup.comdoge addnode=doge.cryptoculture.net addnode=dogepool.pw addnode=doge.gentoomen.org addnode=doge.cryptominer.net addnode=67.205.20.10 addnode=162.243.113.110 addnode=78.46.57.132 
And paste it into a new text file called dogecoin.conf, which you then place into the dogecoin app directory.
Now restart your qt client and the blockchain should start downloading in about 1-2 minutes.
Once it finished downloading, you're ready to send and receive Dogecoins!

GETTING COINS

Decide how you want to get Dogecoin. Your options are:
I'll go into detail about each of these. I'm currently writing this out. I'll make edits as I add sections. Suggestions are welcome.

MINING

Mining is how new dogecoins are created. If you're new to crypto currencies, read this. To mine (also called "digging"), a computer with a decent GPU (graphics card) is recommended. You can also mine with your CPU, but it's not as efficient.

GPU MINING

These instructions cover only Windows for now. To mine, you'll need to figure out what GPU you have. It'll be either AMD/ATI or Nvidia. The setup for both is approximately the same.

Step One: Choose a pool

There's a list of pools on the wiki. For now it doesn't really matter which one you choose. You can easily switch later.
NOTE: You can mine in two ways. Solo mining is where you mine by yourself. When you find a block you get all the reward. Pool mining is when you team up with other miners to work on the same block together. This makes it more likely that you'll find a block, but you won't get all of it, you'll have to split it up with others according to your share of the work. Pool mining is recommended because it gives you frequent payouts, because you find more blocks. The larger the pool you join, the more frequent the payouts, but the smaller the reward you get.
Over a long period of time the difference between pool and solo mining goes away, but if you solo mine it might be months before you get any coins.

Step two: Set up pool account

The pool you chose should have a getting started page. Read it and follow the instructions. Instructions vary but the general idea is:
When you're done with this, you'll need to know:

Step three: Download mining software

For best performance you'll need the right mining software.
Unzip the download anywhere you want.

Step four: Set up miner

Create a text file in the same folder as your miner application. Inside, put the command you'll be running (remove brackets).
For AMD it's cgminer.exe --scrypt -o stratum+tcp://: -u -p
For Nvidia it's cudaminer.exe -o stratum+tcp://: -O :
Substitute the right stuff in for the placeholders. Then on the next line of the text file type pause. This will let you see any errors that you get. Then save the file with any name you want, as long as the file extension is .bat. For example mine_serverName.bat.

Step five: Launch your miner

Just open the .bat file and a command line window should pop up, letting you know that the miner is starting. Once it starts, it should print out your hash rate.
If you now go to the pool website, the dashboard should start showing your hashrate. At first it'll be lower than what it says in the miner, but that's because the dashboard is taking a 5 minute average. It'll catch up soon enough.
NOTE: A normal hashrate is between 50 Kh/s up to even 1 Mh/s depending on your GPU.

You're now mining Dogecoins

That's it, nothing more to it.

CPU MINING

CPU mining isn't really recommended, because you'll be spending a lot on more on power than you'd make from mining Dogecoin. You could better spend that money on buying Dogecoin by trading. But if you have free electricity and want to try it out, check out this informative forum post.

Trading

Trading has been difficult so far, but Dogecoin just got added to a few new exchanges. If you don't have a giant mining rig, this is probably the best way to get 100k or more dogecoins at the moment. I'll write up a more complete guide, but for now check out these sites:

Faucets

Faucets are sites that give out free coins. Usually a site will give out somewhere between 1 and 100 Dogecoin. Every site has its own time limits, but usually you can only receive coins once every few hours, or in some cases, days. It's a great way to get started. All you do is copy your address from the receive section of your wallet and enter it on some faucet sites. Check out /dogecoinfaucets for more. If you go to each site on there you might end up with a couple hundred Dogecoin!

Begging

This method is pretty straightforward. Post your receiving address, and ask for some coins. Such poor shibe. The only catch is, don't do it here! Please go to /dogecoinbeg.

Tips

At the moment there are two tip bots:
Other redditors can give you Dogecoin by summoning the tip bot, something like this:
+dogetipbot 5 doge
This might happen if you make a good post, or someone just wants to give out some coins. Once you receive a tip you have to accept it in a few days or else it'll get returned. Do this by following the instructions on the message you receive in your inbox. You reply to the bot with "+accept". Commands go in the message body. Once you do that, the bot will create a tipping address for you, and you can use the links in the message you receive to see your info, withdraw coins to your dogecoin-qt wallet, see your history, and a bunch of other stuff.
As a bonus, so_doge_tip has a feature where you can get some Dogecoins to start with in exchange for how much karma you have. To do this, send the message "+redeem DOGE" to so_doge_tip. You'll need to create a tipping account if you don't have one.
If you want to create a tipping account without ever being tipped first, message either of the bots with "+register" and an address will be created for you.

CHANGELOG

  • 1/21/14 - Added note about this thread no longer being updated
  • 1/21/14 - Changed wallet links to official site
  • 12/27/13 - Added 1.3 wallet-qt links
  • 12/21/13 - Added new windows 1.2 wallet link
  • 12/20/13 - Fixed +redeem text
  • 12/18/13 - Added short blurb on trading.
  • 12/18/13 - Updated cudaminer to new version (cudaminer-2013-12-18.zip).
  • 12/18/13 - Fixed +redeem link
  • 12/18/13 - Updates dogecoin.conf, from here.
  • 12/17/13 - Linked to mining explanation.
  • 12/17/13 - Added link to CPU mining tutorial, in response to this.
  • 12/16/13 - Added links to tip commands, link to dogetipbot wiki.
  • 12/16/13 - Note about tip commands going in body, in response to this.
  • 12/16/13 - Added link to cgminer mirror, thanks to scubasteve812 and thanks to Bagrisham.
  • 12/16/13 - Note about removing brackets in response to this.
  • 12/15/13 - Fixed hash rate as per this comment, thanks lleti
  • 12/15/13 - Added info for all other ways of getting money, except for trading (placeholder for now)
  • 12/15/13 - Added windows GPU mining instructions 12/15/13 - Added wallet instructions, list of how to get money
submitted by lego-banana to dogecoin [link] [comments]

PIVX Core v3.0.6 released (November 30th) - Optional Upgrade

Github release info and binaries
Forum Post
Important information about the automint and zPIV backup requirements

How to Upgrade

This release is optional but recommended. The latest mandatory upgrade is v3.0.5.1, but if you have any problems with earlier versions the latest version is recommended.
If you are running an older version, gracefully shut it down. Wait until it has completely shut down (which might take a few minutes for older versions), then run the installer (on Windows) or just copy over /Applications/PIVX-Qt (on Mac) or pivxd/pivx-qt (on Linux).
There are no special steps needed like config file changes but a backup is always a good idea.
A note from presstab in case it gets buried in the comments
Command line install and upgrade guide

Notable Changes

(but you should still read the release notes on Github)

Automated Database Corruption Repair

There have been cases of blockchain database corruption that can occur when PIVX client is not closed gracefully. The most common cases of corruption have been identified and the wallet will now automatically fix most of these corruptions. Certain corruption states are still unable to be fixed, but now provide more detailed error messages to the user as well as prompting the user to reindex their database.

More Accurate Error Messages

Some error messages in the wallet have been too vague and done little to help developers and the support team properly identify issues. Error messages have been refined and are now more specific.

Reduction of Debug Log Spam

Many 3rd party services have reported that their debug logs have been overloaded with messages about unknown transaction types. This log spam has been fixed.

Removal of Heavy Running Transaction Search Code

Many areas of the block validation code use a "slow" transaction search, which searches redundantly for transactions. This "slow" search has been removed upstream in Bitcoin and is now removed in PIVX. This provides a more efficient syncing process and generally better performing wallet.

Sync Fix for Block 908000

Many wallets were having trouble getting past block 908000. This block recalculates certain aspects of the money supply and zPIV transactions, and is known to take longer to sync. Code has been added to allow block 908000 to be validated without the user needing to enter any special commands into the debug console.

Working Testnet

Testnet is now accessible with this release of the wallet. Testnet can be accessed using the -testnet startup flag.

zPIV Spending Fix

zPIV that were minted between block 891730 and 895400 were experiencing an error initializing the accumulator witness data correctly, causing an inability to spend those mints. This has been fixed.

Credits

Thanks to everyone who directly contributed to this release:
As well as everyone that helped translating on Transifex.
submitted by turtleflax to pivx [link] [comments]

IRC Log from Ravencoin Open Developer Meeting - Aug 24, 2018

[14:05] <@wolfsokta> Hello Everybody, sorry we're a bit late getting started
[14:05] == block_338778 [[email protected]/web/freenode/ip.72.214.222.226] has joined #ravencoin-dev
[14:06] <@wolfsokta> Here are the topics we would like to cover today • 2.0.4 Need to upgrade - What we have done to communicate to the community • Unique Assets • iOS Wallet • General Q&A
[14:06] == Chatturga changed the topic of #ravencoin-dev to: 2.0.4 Need to upgrade - What we have done to communicate to the community • Unique Assets • iOS Wallet • General Q&A
[14:06] <@wolfsokta> Daben, could you mention what we have done to communicate the need for the 2.0.4 upgrade?
[14:07] == hwhwhsushwban [[email protected]/web/freenode/ip.172.58.37.35] has joined #ravencoin-dev
[14:07] <@wolfsokta> Others here are free to chime in where they saw the message first.
[14:07] == hwhwhsushwban [[email protected]/web/freenode/ip.172.58.37.35] has quit [Client Quit]
[14:08] Whats up bois
[14:08] hi everyone
[14:08] hi hi
[14:08] <@wolfsokta> Discussing the 2.0.4 update and the need to upgrade.
[14:08] <@Chatturga> Sure. As most of you are aware, the community has been expressing concerns with the difficulty oscillations, and were asking that something be done to the difficulty retargeting. Many people submitted suggestions, and the devs decided to implement DGW.
[14:09] <@Tron> I wrote up a short description of why we're moving to a new difficulty adjustment. https://medium.com/@tronblack/ravencoin-dark-gravity-wave-1da0a71657f7
[14:09] <@Chatturga> I have made posts on discord, telegram, bitcointalk, reddit, and ravencointalk.org from testnet stages through current.
[14:10] <@Chatturga> If there are any other channels that can reach a large number of community members, I would love to have more.
[14:10] <@wolfsokta> Thanks Tron, that hasn't been shared to the community at large yet, but folks feel free to share it.
[14:10] When was this decision made and by whom and how?
[14:10] <@Chatturga> I have also communicated with the pool operators and exchanges about the update. Of all of the current pools, only 2 have not yet updated versions.
[14:11] <@wolfsokta> The decision was made by the developers through ongoing requests for weeks made by the community.
[14:12] <@wolfsokta> Evidence was provided by the community of the damages that could be caused to projects when the wild swings continue.
[14:12] So was there a meeting or vote? How can people get invited
[14:12] <@Tron> It was also informed by my conversations with some miners that recommended that we make the change before the coin died. They witnessed similar oscillations from which other coins never recovered.
[14:13] only two pools left to upgrade is good, what about the exchanges? Any word on how many of those have/have not upgraded?
[14:13] <@wolfsokta> We talked about here in our last meeting Bruce_. All attendees were asked if they had any questions or concerns.
[14:13] == blondfrogs [[email protected]/web/freenode/ip.185.245.87.219] has joined #ravencoin-dev
[14:13] == roshii [[email protected]/web/freenode/ip.41.251.25.100] has joined #ravencoin-dev
[14:13] sup roshii long time no see
[14:14] <@Chatturga> Bittrex, Cryptopia, and IDCM have all either updated or have announced their intent to update.
[14:14] == wjcgiwgu283ik3cj [[email protected]/web/freenode/ip.172.58.37.35] has joined #ravencoin-dev
[14:15] sup russki
[14:15] what's the status here?
[14:15] I don’t think that was at all clear from the last dev meeting
[14:15] I can’t be the only person who didn’t understand it
[14:15] <@wolfsokta> Are there any suggestions on how to communicate the need to upgrade even further? I am concerned that others might also not understand.
[14:17] I’m not sold on the benefit and don’t understand the need for a hard fork — I think it’s a bad precedent to simply go rally exchanges to support a hard fork with little to no discussion
[14:17] so just to note, the exchanges not listed as being upgraded or have announced their intention to upgrade include: qbtc, upbit, and cryptobridge (all with over $40k usd volume past 24 hours according to coinmarketcap)
[14:18] <@wolfsokta> I don't agree that there was little or no discussion at all.
[14:19] <@wolfsokta> Looking back at our meeting notes from two weeks ago "fork" was specifically asked about by BrianMCT.
[14:19] If individual devs have the power to simple decide to do something as drastic as a hard fork and can get exchanges and miners to do it that’s got a lot of issues with centralization
[14:19] <@wolfsokta> It had been implemented on testnet by then and discussed in the community for several weeks before that.
[14:19] == under [[email protected]/web/freenode/ip.72.200.168.56] has joined #ravencoin-dev
[14:19] howdy
[14:19] Everything I’ve seen has been related to the asset layer
[14:19] I have to agree with Bruce_, though I wasn't able to join the last meeting here. That said I support the fork
[14:20] Which devs made this decision to do a fork and how was it communicated?
[14:20] well mostly the community made the decision
[14:20] Consensus on a change is the heart of bitcoin development and I believe the devs have done a great job building that consensus
[14:20] a lot of miners were in uproar about the situation
[14:20] <@wolfsokta> All of the devs were supporting the changes. It wasn't done in isolation at all.
[14:21] This topic has been a huge discussion point within the RVN mining community for quite some time
[14:21] the community and miners have been having issues with the way diff is adjusted for quite some time now
[14:21] Sure I’m well aware of that -
[14:21] Not sold on the benefits of having difficulty crippled by rented hashpower?
[14:21] The community saw a problem. The devs got together and talked about a solution and implemented a solution
[14:21] I’m active in the community
[14:22] So well aware of the discussions on DGW etc
[14:22] Hard fork as a solution to a problem community had with rented hashpower (nicehash!!) sounds like the perfect decentralized scenario!
[14:23] hard forks are very dangerous
[14:23] mining parties in difficulty drops are too
[14:23] <@wolfsokta> Agreed, we want to keep them to an absolute minimum.
[14:23] But miners motivation it’s the main vote
[14:24] What would it take to convince you that constantly going from 4 Th/s to 500 Gh/s every week is worse for the long term health of the coin than the risk of a hard fork to fix it?
[14:24] == Tron [[email protected]/web/freenode/ip.173.241.144.77] has quit [Ping timeout: 252 seconds]
[14:24] This hardfork does include the asset layer right? if so why is it being delayed in implementation?
[14:24] <@wolfsokta> Come back Tron!
[14:24] coudl it have been implement through bip9 voting?
[14:24] also hard fork is activated by the community! that's a vote thing!
[14:24] @mrsushi to give people time to upgrade their wallet
[14:25] @under, it would be much hard to keep consensus with a bip9 change
[14:25] <@wolfsokta> We investigated that closely Under.
[14:25] == Tron [[email protected]/web/freenode/ip.173.241.144.77] has joined #ravencoin-dev
[14:25] <@wolfsokta> See Tron's post for more details about that.
[14:25] <@spyder_> Hi Tron
[14:25] <@wolfsokta> https://medium.com/@tronblack/ravencoin-dark-gravity-wave-1da0a71657f7
[14:25] Sorry about that. Computer went to sleep.
[14:26] I'm wrong
[14:26] 2 cents. the release deadline of october 31st puts a bit of strain on getting code shipped. (duh). but fixing daa was important to the current health of the coin, and was widely suppported by current mining majority commuity. could it have been implemented in a different manner? yes . if we didnt have deadlines
[14:27] == wjcgiwgu283ik3cj [[email protected]/web/freenode/ip.172.58.37.35] has quit [Quit: Page closed]
[14:27] sushi this fork does not include assets. it's not being delayed though, we're making great progress for an Oct 31 target
[14:28] I don’t see the urgency but my vote doesn’t matter since my hash power is still CPUs
[14:28] <@wolfsokta> We're seeing the community get behind the change as well based on the amount of people jumping back in to mine through this last high difficulty phase.
[14:28] So that will be another hardfork?
[14:28] the fork does include the asset code though set to activate on oct 30th
[14:28] yes
[14:29] <@wolfsokta> Yes, it will based on the upgrade voting through the BIP9 process.
[14:29] I wanted to ask about burn rates from this group: and make a proposal.
[14:29] we're also trying hard to make it the last for awhile
[14:29] Can you clear up the above — there will be this one and another hard fork?
[14:29] <@wolfsokta> Okay, we could discuss that under towards the end of the meeting.
[14:30] If this one has the asset layer is there something different set for October
[14:30] <@wolfsokta> Yes, there will be another hard fork on October 31st once the voting process is successful.
[14:31] <@wolfsokta> The code is in 2.0.4 now and assets are active on testnet
[14:31] Bruce, the assets layer is still being worked on. Assets is active on mainnet. So in Oct 31 voting will start. and if it passes, the chain will fork.
[14:31] this one does NOT include assets for mainnet Bruce -- assets are targeted for Oct 31
[14:31] not***
[14:31] not active****
[14:31] correct me if I'm wrong here, but if everyone upgrades to 2.0.4 for this fork this week, the vote will automatically pass on oct 31st correct? nothing else needs to be done
[14:31] Will if need another download or does this software download cover both forks?
[14:31] <@wolfsokta> Correct Urgo
[14:32] thats how the testnet got activated and this one shows "asset activation status: waiting until 10/30/2018 20:00 (ET)"
[14:32] Will require another upgrade before Oct 31
[14:32] thank you for the clarification wolfsokta
[14:32] <@wolfsokta> It covers both forks, but we might have additional bug fixes in later releases.
[14:32] So users DL one version now and another one around October 30 which activates after that basically?
[14:33] I understand that, but I just wanted to make it clear that if people upgrade to this version for this fork and then don't do anything, they are also voting for the fork on oct 31st
[14:33] Oh okay — one DL?
[14:33] Bruce, Yes.
[14:33] Ty
[14:33] well there is the issue that there maybe some further consensus bugs dealing with the pruneability of asset transactions that needs to be corrected between 2.0.4 and mainnet. so i would imagine that there will be further revisions required to upgrade before now and october 31
[14:33] @under that is correct.
[14:34] I would highly recommend bumping the semver up to 3.0.0 for the final pre 31st release so that the public know to definitely upgrade
[14:34] @under +1
[14:35] out of curiosity, have there been many bugs found with the assets from the version released in july for testnet (2.0.3) until this version? or is it solely a change to DGW?
[14:35] <@wolfsokta> That's not a bad idea under.
[14:35] <@spyder_> @under good idea
[14:35] @urgo. Bugs are being found and fixed daily.
[14:35] Any time the protocol needs to change, there would need to be a hard fork (aka upgrade). It is our hope that we can activate feature forks through the BIP process (as we are doing for assets). Mining pools and exchanges will need to be on the newest software at the point of asset activation - should the mining hash power vote for assets.
[14:35] blondfrogs: gotcha
[14:35] There have been bugs found (and fixed). Testing continues. We appreciate all the bug reports you can give us.
[14:36] <@wolfsokta> Yes! Thank you all for your help in the community.
[14:37] (pull requests with fixes and test coverage would be even better!)
[14:37] asset creation collision is another major issue. current unfair advantage or nodes that fore connect to mining pools will have network topologies that guarantee acceptance. I had discussed the possibility of fee based asset creation selection and i feel that would be a more equal playing ground for all users
[14:38] *of nodes that force
[14:38] <@wolfsokta> What cfox said, we will always welcome development help.
[14:38] So just to make sure everyone know. When assets is ready to go live on oct 31st. Everyone that wants to be on the assets chain without any problems will have to download the new binary.
[14:39] <@wolfsokta> The latest binary.
[14:39] under: already in the works
[14:39] excellent to hear
[14:39] == UserJonPizza [[email protected]/web/freenode/ip.24.218.60.237] has joined #ravencoin-dev
[14:39] <@wolfsokta> Okay, we've spent a bunch of time on that topic and I think it was needed. Does anybody have any other suggestions on how to get the word out even more?
[14:40] maybe preface all 2.0.X releases as pre-releases... minimize the number of releases between now and 3.0 etc
[14:41] <@wolfsokta> Bruce_ let's discuss further offline.
[14:41] wolfsokta: which are the remaining two pools that need to be upgraded? I've identified qbtc, upbit, and cryptobridge as high volume exchanges that haven't said they were going to do it yet
[14:41] so people can help reach out to them
[14:41] f2pool is notoriously hard to contact
[14:41] are they on board?
[14:42] <@wolfsokta> We could use help reaching out to QBTC and Graviex
[14:42] I can try to contact CB if you want?
[14:42] <@Chatturga> The remaining pools are Ravenminer and PickAxePro.
[14:42] <@Chatturga> I have spoken with their operators, the update just hasnt been applied yet.
[14:42] ravenminer is one of the largest ones too. If they don't upgrade that will be a problem
[14:42] okay good news
[14:42] (PickAxePro sounds like a Ruby book)
[14:43] I strongly feel like getting the word out on ravencoin.org would be beneficial
[14:44] that site is sorely in need of active contribution
[14:44] Anyone can volunteer to contribute
[14:44] <@wolfsokta> Okay, cfox can you talk about the status of unique assets?
[14:44] sure
[14:45] <@wolfsokta> I'll add website to the end of our topics.
[14:45] code is in review and will be on the development branch shortly
[14:45] would it make sense to have a page on the wiki (or somewhere else) that lists the wallet versions run by pools & exchanges?
[14:45] will be in next release
[14:45] furthermore, many sites have friendly link to the standard installers for each platform, if the site linked to the primary installers for each platform to reduce github newb confusion that would be good as well
[14:46] likely to a testnetv5 although that isn't settled
[14:46] <@wolfsokta> Thanks cfox.
[14:46] <@wolfsokta> Are there any questions about unique assets, and how they work?
[14:47] after the # are there any charachters you cant use?
[14:47] will unique assets be constrained by the asset alphanumeric set?
[14:47] ^
[14:47] <@Chatturga> @Urgo there is a page that tracks and shows if they have updated, but it currently doesnt show the actual version that they are on.
[14:47] a-z A-Z 0-9
[14:47] <@Chatturga> https://raven.wiki/wiki/Exchange_notifications#Pools
[14:47] There are a few. Mostly ones that mess with command-line
[14:47] you'll be able to use rpc to do "issueunique MATRIX ['Neo','Tank','Tank Brother']" and it will create three assets for you (MATRIX#Neo, etc.)
[14:47] @cfox - No space
[14:48] @under the unique tags have an expanded set of characters allowed
[14:48] Chatturga: thank you
[14:48] @UJP yes there are some you can't use -- I'll try to post gimmie a sec..
[14:49] Ok. Thank you much!
[14:49] 36^36 assets possible and 62^62 uniques available per asset?
[14:49] <@spyder_> std::regex UNIQUE_TAG_CHARACTERS("^[[email protected]$%&*()[\\]{}<>_.;?\\\\:]+$");
[14:50] regex UNIQUE_TAG_CHARACTERS("^[[email protected]$%&*()[\\]{}<>_.;?\\\\:]+$")
[14:50] oh thanks Mark
[14:51] <@wolfsokta> Okay, next up. I want to thank everybody for helping test the iOS wallet release.
[14:51] <@wolfsokta> We are working with Apple to get the final approval to post it to the App Store
[14:51] @under max asset length is 30, including unique tag
[14:51] Does the RVN wallet have any other cryptos or just RVN?
[14:52] == BruceFenton [[email protected]/web/freenode/ip.67.189.233.170] has joined #ravencoin-dev
[14:52] will the android and ios source be migrated to the ravenproject github?
[14:52] I've been adding beta test users. I've added about 80 new users in the last few days.
[14:52] <@wolfsokta> Just RVN, and we want to focus on adding the asset support to the wallet.
[14:53] == Bruce_ [[email protected]/web/freenode/ip.67.189.233.170] has quit [Ping timeout: 252 seconds]
[14:53] <@wolfsokta> Yes, the code will also be freely available on GitHub for both iOS and Android. Thank you Roshii!
[14:53] Would you consider the iOS wallet to be a more secure place for one's holdings than say, a Mac connected to the internet?
[14:53] will there be a chance of a more user freindly wallet with better graphics like the iOS on PC?
[14:53] the android wallet is getting updated for DGW, correct?
[14:53] <@wolfsokta> That has come up in our discussion Pizza.
[14:54] QT framework is pretty well baked in and is cross platform. if we get some qt gurus possibly
[14:54] Phones are pretty good because the wallet we forked uses the TPM from modern phones.
[14:54] Most important is to write down and safely store your 12 word seed.
[14:54] TPM?
[14:54] <@wolfsokta> A user friendly wallet is one of our main goals.
[14:55] TPM == Trusted Platform Module
[14:55] Ahhh thanks
[14:55] just please no electron apps. they are full of security holes
[14:55] <@spyder_> It is whats makes your stuffs secure
[14:55] not fit for crypto
[14:55] under: depends on who makes it
[14:55] The interface screenshots I've seen look like Bread/Loaf wallet ... I assume that's what was forked from
[14:55] ;)
[14:56] <@wolfsokta> @roshii did you see the question about the Android wallet and DGW?
[14:56] Yes, it was a fork of breadwallet. We like their security.
[14:56] chromium 58 is the last bundled electron engine and has every vuln documented online by google. so unless you patch every vuln.... methinks not
[14:56] Agreed, great choice
[14:57] <@wolfsokta> @Under, what was your proposal?
[14:58] All asset creation Transactions have a mandatory OP_CHECKLOCKTIMEVERIFY of 1 year(or some agreed upon time interval), and the 500 RVN goes to a multisig devfund, run by a custodial group. We get: 1) an artificial temporary burn, 2) sustainable community and core development funding for the long term, after OSTK/Medici 3) and the reintroduction of RVN supply at a fixed schedule, enabling the removal of the 42k max cap of total As
[14:58] *im wrong on the 42k figure
[14:58] <@wolfsokta> Interesting...
[14:59] <@wolfsokta> Love to hear others thoughts.
[14:59] Update: I posted a message on the CryptoBridge discord and one of their support members @stepollo#6276 said he believes the coin team is already aware of the fork but he would forward the message about the fork over to them right now anyway
[14:59] Ifs 42 million assets
[14:59] yep.
[15:00] I have a different Idea. If the 500 RVN goes to a dev fund its more centralized. The 500 RVN should go back into the unmined coins so miners can stay for longer.
[15:01] *without a hardfork
[15:01] <@wolfsokta> lol
[15:01] that breaks halving schedule, since utxos cant return to an unmined state.
[15:01] @UJP back into coinbase is interesting. would have to think about how that effects distribution schedule, etc.
[15:01] only way to do that would be to dynamicaly grow max supply
[15:02] and i am concerned already about the max safe integer on various platforms at 21 billion
[15:02] js chokes on ravencoin already
[15:02] <@wolfsokta> Other thoughts on Under's proposal? JS isn't a real language. ;)
[15:02] Well Bitcoin has more than 21 bn Sats
[15:02] Is there somebody who wants to volunteer to fix js.
[15:02] hahaha
[15:03] I honestly would hate for the coins to go to a dev fund. It doesn't seem like Ravencoin to me.
[15:03] Yep, but we're 21 billion x 100,000,000 -- Fits fine in a 64-bit integer, but problematic for some languages.
[15:03] <@wolfsokta> Thanks UJP
[15:04] <@wolfsokta> We're past time but I would like to continue if you folks are up for it.
[15:04] Yeah no coins can go anywhere centrality contorted like a dev fund cause that would mean someone has to run it and the code can’t decide that so it’s destined to break
[15:05] currently and long term with out the financial backing of development then improvements and features will be difficult. we are certainly thankful for our current development model. but if a skunkworks project hits a particular baseline of profitability any reasonable company would terminate it
[15:05] Yes let’s contibue for sure
[15:05] the alternative to a dev fund in my mind would be timelocking those funds back to the issuers change address
[15:06] But we can’t have dev built in to the code — it has to be open source like Bitcoin and monero and Litecoin - it’s got drawbacks but way more advantages- it’s the best model
[15:06] Dev funding
[15:06] i highly reccommend not reducing the utility of raven by removing permanently the supply
[15:07] == BW_ [[email protected]/web/freenode/ip.138.68.243.202] has joined #ravencoin-dev
[15:07] timelocking those funds accompllishes the same sacrifice
[15:07] @under timelocking is interesting too
[15:07] How exactly does timelocking work?
[15:07] <@wolfsokta> ^
[15:07] I mean you could change the price of assets with the Block reward halfing.
[15:07] == Roshiix [[email protected]/web/freenode/ip.105.67.2.212] has joined #ravencoin-dev
[15:08] funds cant be spent from an address until a certain time passes
[15:08] but in a what magical fairy land do people continue to work for free forever. funding development is a real issue... as much as some might philosphically disagree. its a reality
[15:08] You’d still need a centralized party to decide how to distribute the funds
[15:08] even unofficially blockstream supports bitcoin devs
[15:08] on chain is more transparent imho
[15:09] == Tron_ [[email protected]/web/freenode/ip.173.241.144.77] has joined #ravencoin-dev
[15:09] @UJP yes there are unlimited strategies. one factor that I think is v important is giving application developers a way to easily budget for projects which leads to flat fees
[15:09] If the project is a success like many of believe it will be, I believe plenty of people will gladly done to a dev fund. I don't think the 500 should be burned.
[15:09] *donate
[15:09] centralized conservatorship, directed by community voting process
[15:10] == Tron [[email protected]/web/freenode/ip.173.241.144.77] has quit [Ping timeout: 252 seconds]
[15:10] <@wolfsokta> Thanks Under, that's an interesting idea that we should continue to discuss in the community. You also mentioned the existing website.
[15:10] It would need to be something where everyone with a QT has a vote
[15:10] think his computer went to sleep again :-/
[15:10] I agree UJP
[15:10] with the website
[15:10] No that’s ico jargon — any development fund tied to code would have to be centralized and would therefor fail
[15:11] ^
[15:11] ^
[15:11] ^
[15:11] dashes model for funding seems to be pretty decentralized
[15:11] community voting etc
[15:11] Once you have a dev fund tied to code then who gets to run it? Who mediates disputes?
[15:11] oh well another discussion
[15:11] Dash has a CEO
[15:12] <@wolfsokta> Yeah, let's keep discussing in the community spaces.
[15:12] Dash does have a good model. It's in my top ten.
[15:12] having the burn go to a dev fund is absolute garbage
[15:12] These dev chats should be more target than broad general discussions — changing the entire nature of the coin and it’s economics is best discussed in the RIPs or other means
[15:13] <@wolfsokta> Yup, let's move on.
[15:13] just becuase existing implementation are garbage doesnt mean that all possible future governance options are garbage
[15:13] <@wolfsokta> To discussing the website scenario mentioned by under.
[15:13] the website needs work. would be best if it could be migrated to github as well.
[15:13] What about this: Anyone can issue a vote once the voting feature has been added, for a cost. The vote would be what the coins could be used for.
[15:14] features for the site that need work are more user friendly links to binaries
[15:14] <@wolfsokta> We investigated how bitcoin has their website in Github to make it easy for contributors to jump in.
[15:14] that means active maintenance of the site instead of its current static nature
[15:15] <@wolfsokta> I really like how it's static html, which makes it super simple to host/make changes.
[15:15] the static nature isn’t due to interface it’s due to no contributors
[15:15] no contribution mechanism has been offered
[15:15] github hosted would allow that
[15:16] We used to run the Bitcoin website from the foundation & the GitHub integration seemed to cause some issues
[15:16] its doesnt necessarily have to be hosted by github but the page source should be on github and contributions could easily be managed and tracked
[15:17] for example when a new release is dropped, the ability for the downlaods section to have platform specific easy links to the general installers is far better for general adoption than pointing users to github releases
[15:18] <@wolfsokta> How do people currently contribute to the existing website?
[15:18] they dont?
[15:18] We did that and it was a complete pain to host and keep working — if someone wants to volunteer to do that work hey can surely make the website better and continually updated — but they could do that in Wordpress also
[15:19] I’d say keep an eye out for volunteers and maybe we can get a group together who can improve the site
[15:19] == digitalvap0r-xmr [[email protected]/web/cgi-irc/kiwiirc.com/ip.67.255.25.134] has joined #ravencoin-dev
[15:19] And they can decide best method
[15:20] I host the source for the explorer on github and anyone can spin it up instantly on a basic aws node. changes can be made to interface etc, and allow for multilingual translations which have been offered by some community members
[15:20] there are models that work. just saying it should be looked at
[15:20] i gotta run thank you all for your contributions
[15:20] <@wolfsokta> I feel we should explore the source for the website being hosted in GitHub and discuss in our next dev meeting.
[15:21] <@Chatturga> Thanks Under!
[15:21] == under [[email protected]/web/freenode/ip.72.200.168.56] has quit [Quit: Page closed]
[15:21] <@wolfsokta> Thanks, we also need to drop soon.
[15:21] There is no official site so why care. Someone will do better than the next if RVN is worth it anyway. That's already the case.
[15:21] <@wolfsokta> Let's do 10 mins of open Q&A
[15:22] <@wolfsokta> Go...
[15:23] <@Chatturga> Beuller?
[15:24] No questions ... just a comment that the devs and community are great and I'm happy to be a part of it
[15:24] I think everyone moved to discord. I'll throw this out there. How confident is the dev team that things will be ready for oct 31st?
[15:24] <@wolfsokta> Alright! Thanks everybody for joining us today. Let's plan to get back together as a dev group in a couple of weeks.
[15:25] thanks block!
[15:25] <@wolfsokta> Urgo, very confident
[15:25] Please exclude trolls from discord who havent read the whitepaper
[15:25] great :)
[15:25] "things" will be ready..
[15:25] Next time on discord right?
[15:25] woah why discord?
[15:25] some of the suggestions here are horrid
[15:25] this is better less point
[15:25] == blondfrogs [[email protected]/web/freenode/ip.185.245.87.219] has quit [Quit: Page closed]
[15:25] Assets are working well on testnet. Plan is to get as much as we can safely test by Sept 30 -- this includes dev contributions. Oct will be heavy testing and making sure it is safe.
[15:26] people
[15:26] <@wolfsokta> Planning on same time, same IRC channel.
[15:26] == BW_ [[email protected]/web/freenode/ip.138.68.243.202] has quit [Quit: Page closed]
[15:26] @xmr any in particular?
[15:27] (or is "here" discord?)
[15:27] Cheers - Tron
[15:27] "Cheers - Tron" - Tron
submitted by Chatturga to Ravencoin [link] [comments]

Groestlcoin Release September 2018

Introduction

As always, the past 3 months since 22nd June have been crazy busy. The bears might still be around, but the show must go on and of course has not slowed the Groestlcoin development team in the slightest. Here’s a quick overview of what has already happened since the last release: - Integrated into the bitbns exchange, with the ability to buy Groestlcoin directly with the Indian Rupee. - Groestlcoin Rebrand Vote – Whilst there was much talk and push for a rebrand vote, the overall result was almost unanimously in favour of keeping our unique and conversation-starting name. With just 83 votes to Rebrand, and 2577 votes to No Rebrand. Thank you for all who voted, the funds raised are being used to fund ongoing hosting and development costs. - Integrated into the Cryptobridge exchange. Cryptobridge is a popular decentralised exchange where you always hold the private keys to your funds, only YOU have access to them. - Groestlcoin has been added to SimpleSwap – Groestlcoin can now be swapped with over 100 other cryptocurrencies, without signing up! - Groestlcoin has been added to UnoDax, one of the leading cryptocurrency exchanges in India, with TUSD, BTC and INR trading pairs. - Groestlcoin has been added to SwapLab.cc, where you can buy Groestlcoin using Bitcoin and over 50 other altcoins. Purchasing with VISA/Mastercard is coming VERY SOON. Discussed later: - Groestlcoin has been listed on #3 largest exchange in the world on volume, Huobi Global! More on this to come further on in the announcements. - Groestlcoin has been added to the Guarda Multi-Currency Wallet. - Groestlcoin has been added to Melis Multi-Device, Multi-Account, Multi-Platform, Multi-Signature advanced wallet! Already this list is far more than most other cryptocurrencies have achieved in the past 3 months. But this is just the tip of the iceberg of what has been developed.

What's been Happening?

GRSPay Released

We are so excited for this, that it has it's own separate reddit thread. Head over there now at https://www.reddit.com/groestlcoin/comments/9ikr5m/groestlcoin_releases_grspay/? to see more on this!
https://www.melis.io/assets/logo-navbar-4b6f0d372f15b2446d3fa4c68f346e4fb08ee113941186cee58fd6135f3f8b7d.svg

Melis Wallet

The the most advanced wallet for Bitcoin, Bitcoin Cash, Litecoin and now Groestlcoin.
With Melis you have the complete control of your bitcoins and private keys, you can define spending limits policies and make use of two or more factors authentication. Melis is open source, published on GitHub.

How Melis Works?

You can create as many accounts as you want. An account is a part of your wallet that can be customised to your requirements. You can choose how many co-signers are required to spend funds. The accounts are completely independent and act like separate wallets from each other but can be accessed via the same details. A core feature of Melis is the ability to set a ‘primary’ device. With this you can set an account as ‘Secure’ so it is only viewable (and accessible at all) from the Primary device. You can have a savings account hidden from the outside world whilst also having your ‘spending’ funds available on the go. With Melis you can create a multi-signature account between N people, where up to N signatures are required to sign a transaction, choosing if any of those should be mandatory.
Core Features:
https://guarda.co/assets/images/1PGo4ID.svg?1537791124643

Guarda Wallet

Safer than ever! Desktop Light Wallet - Anonymous and fast!
With Guarda Multi-currency Desktop Light Wallet you don’t need to register. Guarda has no access to your private keys or funds. You can receive, send, store, buy and exchange cryptocurrencies in complete anonymity and safety. All these features are available on Linux, Windows or MacOS. Choose the one that suits you!
More info about Guarda wallet on www.guarda.co
https://holytransaction.com/images/logo.png

Integrated into HolyTransaction

What is HolyTransaction?

HolyTransaction gives users access to the crypto world with a universal cryptocurrency wallet and instant exchange.

Features

For more information, visit Holy Transaction here.
https://www.groestlcoin.org/wp-content/uploads/2018/09/next-grs-groestlcoin.jpg

Integrated into NEXT Wallet

What is NEXT?

NEXT is a modern, next-generation stylish open-source Desktop wallet.

Features

For more information, visit NextWallet here.
https://blockchainfinancial.com/mediaserve2018/09/admin-06143647-bcf_logo_vec_256x256.png

Integrated into Blockchain Financial

What is Blockchain Financial?

Blockchain Financial is a set of web based services for individuals and companies that want to make things happen with the Cryptocurrencies Ecosystem. - For those that don't know anything about cryptocurrencies, we offer tools that will let them receive, send and operate with an assortment of coins. - For those that are already riding the wave, we offer tools that will let them do all those things that they weren't able to do.

Blockchain Financials mission

We're not here to reinvent the wheel. We're here to make it run smoother for you, and we provide some of the most useful services you'll find on the internet, made in a way that is easy to understand and use on a daily basis. In short, we're a bunch of people that claim to be Crypto Evangelists. We strongly believe in cryptocurrencies, and our main promise is to push them up so more people get involved and take all the advantages they offer.

More information from Blockchain Financial

Back in 2014, the world was taken by storm when Facebook approved the first cryptocurrencies tipping apps. The first was for Dogecoin, and the second was for multiple coins.
The project was hosted on whitepuma.net, and persisted for almost two years, built up a massive user community and gave a home to Bitcoin, Litecoin, Dogecoin and dozens of other bitcoin-based altcoins.
After very active months, the tipping hype started to fade away. Then, the developers decided to jump into the next stage: bringing not only tipping, but also mining and a widget that could be embedded on websites to allow everyone to accept payments. Sadly, the work was never completed because the project started to require an unsustainable amount of resources. Then, in a painful decision, a shutdown was announced by December 2015.
A couple of months after whitepuma.net was closed, the source code was released by its creator as Open Source on GitHub. But it wasn't maintained.
Now, some of the original members of the dev and admin teams gathered up with a handful of the WhitePuma's elite users, and decided to make something good with the best pieces of the old source code. That, with fresh new ideas and the power of the BardCanvas engine, synthesized the core of Blockchain Financial.
More info about Blockchain Financial wallet on .
For more information, visit [Blockchain Financial](www.blockchainfinancial.com)
https://www.huobi.com/image/logo.aeb4723.svg

Groestlcoin Listed on Huobi

Who are Huobi?

Huobi was founded in China and is now based in Singapore, with offices in Hong Kong, South Korea, Japan and the North America, currently sitting #3 in volume on Coinmarketcap. Huobi is a great leap forward for our growing presence in Asia and we are very excited to be listed here!
You can find the official Huobi announcement here.

Groestlcoin Core v2.16.3 - Please Update ASAP

A new major Groestlcoin Core version 2.16.3 is now available for download which includes both a Denial of Service component and a critical inflation vulnerability, so it is recommended to upgrade to it if you are running a full Groestlcoin node or a local Groestlcoin Core wallet.
v2.16.3 is now the official release version of Groestlcoin Core. This is a new major version release with a very important security updates. It is recommended to upgrade to this version as soon as possible. Please stop running versions of Groestlcoin Core affected by CVE-2018-17144 ASAP: These are 2.13.3 and 2.16.0.
As a result in this, all exchanges and services have been asked to upgrade to this version, so please be patient if wallets go in to maintenance mode on these services.

What's new in version v2.16.3?

This is a major release of Groestlcoin Core fixing a Denial of Service component and a critical inflation vulnerability (https://nvd.nist.gov/vuln/detail/CVE-2018-17144) exploitable by miners that has been discovered in Groestlcoin Core version 2.13.3 and 2.16.0. It is recommended to upgrade to 2.16.3 as soon as possible. If you only occasionally run Groestlcoin Core, then it's not necessary to run out and upgrade it right this second. However, you should upgrade it before you next run it. If you know anyone who is running an older version, tell them to upgrade it ASAP. Stored funds are not at risk, and never were at risk. At this time we believe over half of the Groestlcoin hashrate has upgraded to patched nodes. We are unaware of any attempts to exploit this vulnerability. However, it still remains critical that affected users upgrade and apply the latest patches to ensure no possibility of large reorganizations, mining of invalid blocks, or acceptance of invalid transactions occurs.

The Technicals

In Groestlcoin Core 2.13.3, an optimization was added (Bitcoin Core PR #9049) which avoided a costly check during initial pre-relay block validation that multiple inputs within a single transaction did not spend the same input twice which was added in 2012 (Bitcoin Core PR #443). While the UTXO-updating logic has sufficient knowledge to check that such a condition is not violated in 2.13.3 it only did so in a sanity check assertion and not with full error handling (it did, however, fully handle this case twice in prior to 2.1.0.6). Thus, in Groestlcoin Core 2.13.3, any attempts to double-spend a transaction output within a single transaction inside of a block will result in an assertion failure and a crash, as was originally reported. In Groestlcoin Core 2.16.0, as a part of a larger redesign to simplify unspent transaction output tracking and correct a resource exhaustion attack the assertion was changed subtly. Instead of asserting that the output being marked spent was previously unspent, it only asserts that it exists. Thus, in Groestlcoin Core 2.16.0, any attempts to double-spend a transaction output within a single transaction inside of a block where the output being spent was created in the same block, the same assertion failure will occur. However, if the output being double-spent was created in a previous block, an entry will still remain in the CCoin map with the DIRTY flag set and having been marked as spent, resulting in no such assertion. This could allow a miner to inflate the supply of Groestlcoin as they would be then able to claim the value being spent twice.
Groestlcoin would like to publicly thank Reddit user u/Awemany for finding CVE-2018-17144 and reporting it (https://lists.linuxfoundation.org/pipermail/bitcoin-core-dev/2018-Septembe000064.html). You deserve gratitude and appreciation from cryptoworld, and you have ours. If you want to support him for his work, please consider donating to him on his bitcoin cash address: bitcoincash:qr5yuq3q40u7mxwqz6xvamkfj8tg45wyus7fhqzug5
http://i.imgur.com/3YhyNZK.png

Groestlcoin Electrum-GRS 3.2.2 - Ledger & Trezor Edition

What is Electrum-GRS?
Electrum-GRS is a lightweight "thin client" groestlcoin wallet Windows, MacOS and Linux based on a client-server protocol. Its main advantages over the original Groestlcoin client include support for multi-signature wallets and not requiring the download of the entire block chain.

Changes:

http://i.imgur.com/3YhyNZK.png

Electrum-GRS Mobile Android

What is Electrum-GRS Mobile?

Electrum-grs is a lightweight "thin client" groestlcoin wallet Android based on a client-server protocol. Its main advantages over the original Groestlcoin client include support for multi-signature wallets and not requiring the download of the entire block chain.

Changes

Groestlcoin EasyVanity Released

Groestlcoin EasyVanity is a Windows app is built from the ground-up in C# and makes it easier than ever before to create your very own bespoke Groestlcoin address(es), even whilst not connected to the internet! You can even generate multiple keys with the same prefix and leave it on overnight whilst your CPU or GPU collects and stores these addresses locally.
If you're tired of the random, cryptic addresses generated by regular groestlcoin clients, then Groestlcoin EasyVanity is the right choice for you to create a more personalized address.

Features

• Ability to continue finding keys after first one is found • Includes warning on startup if connected to the internet • Ability to output keys to a text file (And shows button to open that directory) • Ability to make your match case sensitive (Where possible) • Show and hide the private key with a simple toggle switch, and copy the private key straight to your clipboard • Show full output of commands • Includes statistics whilst the application is running • Ability to choose between Processor (CPU) and Graphics Card (GPU) • Automatically detects 32 or 64 bit systems • Features both a Light and Dark Material Design inspired Themes • EasyVanity's search is probabilistic, and the amount of time required to find a given pattern depends on how complex the pattern is, the speed of your computer, and whether you get lucky. • EasyVanity includes components to perform address searching on your CPU (vanitygen) and your OpenCL-compatible GPU (oclvanitygen). Both can be built from source, and both are included in the Windows binary package. • Prefixes are exact strings that must appear at the beginning of the address. When searching for prefixes, Easyvanity will ensure that the prefix is possible, and will provide a difficulty estimate. • The percentage displayed just shows how probable it is that a match would be found in the session so far. If it finds your address with 5% on the display, you are extremely lucky. If it finds your address with 92% on the display, you are unlucky. If you stop EasyVanity with 90% on the display, restart it, and it finds your address with 2% on the display, your first session was unlucky, but your second session was lucky. • EasyVanity uses the OpenSSL random number generator. This is the same RNG used by groestlcoin and a good number of HTTPS servers. It is regarded as well-scrutinized. Guessing the private key of an address found by EasyVanity will be no easier than guessing a private key created by groestlcoin itself. • To speed up address generation, EasyVanity uses the RNG to choose a private key, and literally increments the private key in a loop searching for a match. As long as the starting point is not disclosed, if a match is found, the private key will not be any easier to guess than if every private key tested were taken from the RNG. EasyVanity will also reload the private key from the RNG after 10,000,000 unsuccessful searches (100M for oclvanitygen), or when a match is found and multiple patterns are being searched for. • Free software - MIT. Anyone can audit the code. • Written in C# - The code is short, and easy to review.

Groestlcoin Sentinel (Android & Blackberry) – Mainnet + Testnet

What is Sentinel?

Groestlcoin Sentinel is the easiest and fastest way to track/receive/watch payments in your offline Groestlcoin Wallets. Groestlcoin Sentinel is compatible with any standard Groestlcoin address, BIP44 XPUB (Extended Public Key) BIP49 YPUB and BIP84 ZPUB
Groestlcoin Sentinel is a great solution for anyone who wants the convenience and utility of a hot wallet for receiving payments directly into their cold storage (or hardware wallets). Sentinel accepts XPUB's, YPUB'S, ZPUB's and individual Groestlcoin address. Once added you will be able to view balances, view transactions, and (in the case of XPUB's, YPUB's and ZPUB's) deterministically generate addresses for that particular wallet.

What's New?

The P2SH paperwallet supports creating P2SH paperwallets in bulk, keypair generation with QR codes and sweeping tool. Groestlcoin believes strongly in privacy, the live version does not collect and store IP or transaction data.
Changes
Features
The BECH32 paperwallet supports creating BECH32 paperwallets in bulk, keypair generation with QR codes and sweeping tool. Groestlcoin believes strongly in privacy, the live version does not collect and store IP or transaction data.
Features
![WebWallet](https://i.imgur.com/Z2oj7bj.png)

Groestlcoin Web Wallet Update 1.4

What is Groestlcoin Web Wallet?
Groestlcoin Webwallet is an open source, multisignature, HD Wallet and more! Webwallet is a a open source browser based Groestlcoin webwallet.
Webwallet is a playground for Groestlcoin in javascript to experiment with. It supports multisig, OP_HODL, RBF and many more. Groestlcoin believes strongly in privacy, the live version does not collect and store IP or transaction data.
Changes:
submitted by Yokomoko_Saleen to groestlcoin [link] [comments]

Bitcoin Core 0.10.1 Released

Bitcoin Core version 0.10.1 is now available from:
https://bitcoin.org/bin/bitcoin-core-0.10.1/
This is a new minor version release, bringing bug fixes and translation updates. If you are using 0.10.0, it is recommended to upgrade to this version.
Please report bugs using the issue tracker at github:
https://github.com/bitcoin/bitcoin/issues

Upgrading and downgrading

How to Upgrade

If you are running an older version, shut it down. Wait until it has completely shut down (which might take a few minutes for older versions), then run the installer (on Windows) or just copy over /Applications/Bitcoin-Qt (on Mac) or bitcoind/bitcoin-qt (on Linux).

Downgrade warning

Because release 0.10.0 and later makes use of headers-first synchronization and parallel block download (see further), the block files and databases are not backwards-compatible with pre-0.10 versions of Bitcoin Core or other software:
If you want to be able to downgrade smoothly, make a backup of your entire data directory. Without this your node will need start syncing (or importing from bootstrap.dat) anew afterwards. It is possible that the data from a completely synchronised 0.10 node may be usable in older versions as-is, but this is not supported and may break as soon as the older version attempts to reindex.
This does not affect wallet forward or backward compatibility.

Notable changes

This is a minor release and hence there are no notable changes. For the notable changes in 0.10, refer to the release notes for the 0.10.0 release at https://github.com/bitcoin/bitcoin/blob/v0.10.0/doc/release-notes.md

0.10.1 Change log

Detailed release notes follow. This overview includes changes that affect external behavior, not code moves, refactors or string updates.
RPC:
Block (database) and transaction handling:
P2P protocol and network code:
Validation:
Build system:
Wallet:
GUI:
Tests:
Miscellaneous:

Credits

Thanks to everyone who contributed to this release:
As well as everyone that helped translating on Transifex.
submitted by harda to Bitcoin [link] [comments]

Interested in contributing to the BTC network? Here is the steps to get a full node up and running in Linux.

These instructions will work both on a VPS cloud server or a personal computer. You may find cheap VPS somewhere online for rent.
What Is A Full Node?
A full node is a program that fully validates transactions and blocks. Almost all full nodes also help the network by accepting transactions and blocks from other full nodes, validating those transactions and blocks, and then relaying them to further full nodes.
Most full nodes also serve lightweight clients by allowing them to transmit their transactions to the network and by notifying them when a transaction affects their wallet. If not enough nodes perform this function, clients won’t be able to connect through the peer-to-peer network—they’ll have to use centralized services instead.
Many people and organizations volunteer to run full nodes using spare computing and bandwidth resources—but more volunteers are needed to allow Bitcoin to continue to grow. This document describes how you can help and what helping will cost you.
Costs And Warnings
Running a Bitcoin full node comes with certain costs and can expose you to certain risks. This section will explain those costs and risks so you can decide whether you’re able to help the network.
Special Cases
Miners, businesses, and privacy-conscious users rely on particular behavior from the full nodes they use, so they will often run their own full nodes and take special safety precautions. This document does not cover those precautions—it only describes running a full node to help support the Bitcoin network in general.
Please consult an expert if you need help setting up your full node correctly to handle high-value and privacy-sensitive tasks.
Secure Your Wallet
It’s possible and safe to run a full node to support the network and use its wallet to store your bitcoins, but you must take the same precautions you would when using any Bitcoin wallet. Please see the securing your wallet page for more information.
Minimum Requirements
Bitcoin Core full nodes have certain requirements. If you try running a node on weak hardware, it may work—but you’ll likely spend more time dealing with issues. If you can meet the following requirements, you’ll have an easy-to-use node.
Note: many operating systems today (Windows, Mac, and Linux) enter a low-power mode after the screensaver activates, slowing or halting network traffic. This is often the default setting on laptops and on all Mac OS X laptops and desktops. Check your screensaver settings and disable automatic “sleep” or “suspend” options to ensure you support the network whenever your computer is running.
Possible Problems
Legal: Bitcoin use is prohibited or restricted in some areas.
Bandwidth limits: Some Internet plans will charge an additional amount for any excess upload bandwidth used that isn’t included in the plan. Worse, some providers may terminate your connection without warning because of overuse. We advise that you check whether your Internet connection is subjected to such limitations and monitor your bandwidth use so that you can stop Bitcoin Core before you reach your upload limit.
Anti-virus: Several people have placed parts of known computer viruses in the Bitcoin block chain. This block chain data can’t infect your computer, but some anti-virus programs quarantine the data anyway, making it more difficult to run a full node. This problem mostly affects computers running Windows.
Attack target: People who want to disrupt the Bitcoin network may attack full nodes in ways that will affect other things you do with your computer, such as an attack that limits your available download bandwidth or an attack that prevents you from using your full node’s wallet for sending transactions.
Linux Instructions
The following instructions describe installing Bitcoin Core on Linux systems.
Ubuntu 14.10 Instructions for Bitcoin Core 0.10.0.
If you use Ubuntu Desktop, click the Ubuntu swirl icon to start the Dash and type “term” into the input box. Choose any one of the terminals listed:
Alternatively, access a console or terminal emulator using another method, such as SSH on Ubuntu Server or a terminal launcher in an alternative desktop environment.
Type the following line to add the Bitcoin Personal Package Archive (PPA) to your system:
sudo apt-add-repository ppa:bitcoin/bitcoin
You will be prompted for your user password. Provide it to continue. Afterwards, the following text will be displayed:
Stable Channel of bitcoin-qt and bitcoind for Ubuntu, and their dependencies
More info: https://launchpad.net/~bitcoin/+archive/ubuntu/bitcoin
Press [ENTER] to continue or ctrl-c to cancel adding it
Press enter to continue. The following text (with some variations) will be displayed and you will be returned to the command line prompt:
gpg: keyring /tmp/tmpixuqu73x/secring.gpg' created gpg: keyring/tmp/tmpixuqu73x/pubring.gpg' created gpg: requesting key 8842CE5E from hkp server > > > >keyserver.ubuntu.com gpg: /tmp/tmpixuqu73x/trustdb.gpg: trustdb created gpg: key 8842CE5E: public key "Launchpad PPA for Bitcoin" imported gpg: no ultimately trusted keys found gpg: Total number processed: 1 pg: imported: 1 (RSA: 1) OK
Type the following line to get the most recent list of packages:
sudo apt-get update
A large number of lines will be displayed as different update files are downloaded. This step may take several minutes on a slow Internet connection.
To continue, choose one of the following options
sudo apt-get install bitcoin-qt
sudo apt-get install bitcoind
sudo apt-get install bitcoin-qt bitcoind
After choosing what packages to install, you will be asked whether you want to proceed. Press enter to continue.
If you’re logged in as an administrative user with sudo access, you may log out. The steps in this section should be performed as the user you want to run Bitcoin Core. (If you’re an expert administrator, you can make this a locked account used only by Bitcoin Core.)
Before using the Bitcoin Core daemon, bitcoind, you need to create its configuration file with a user name and password. First create the .bitcoin directory, create (touch) the file, and set the file’s permissions so that only your user account can read it. From the terminal, type:
mkdir ~/.bitcoin touch ~/.bitcoin/bitcoin.conf chmod 600 ~/.bitcoin/bitcoin.conf
Then you can run the command bitcoind. It will print output similar to this:
bitcoind Error: To use the "-server" option, you must set a rpcpassword in the configuration file: /home/bitcoinorg/.bitcoin/bitcoin.conf It is recommended you use the following random password: rpcuser=bitcoinrpc rpcpassword=XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX (you do not need to remember this password)
The username and password MUST NOT be the same.
If the file does not exist, create it with owner-readable-only file permissions. It is also recommended to set alertnotify so you are notified of problems; for example: alertnotify=echo %s | mail -s "Bitcoin Alert" [email protected] The “rpcpassword” displayed will be unique for your system. You can copy the rpcuser and rpcpassword lines into your configuration file using the following commands. Note that in most Ubuntu terminals, you need to press Ctrl-Shift-C to copy and Ctrl-Shift-V to paste because Ctrl-C and Ctrl-V have different meanings in a Unix-style terminal.
echo rpcuser=bitcoinrpc >> ~/.bitcoin/bitcoin.conf echo rpcpassword=XXXXXX >> ~/.bitcoin/bitcoin.conf (Warning: Don’t use XXXXXX as your RPC password. Copy the rpcpassword displayed by bitcoind for your system.)
Now you can start Bitcoin Core daemon for real. Type the following command:
bitcoind -daemon
It will print a message that Bitcoin Core is starting. To interact with Bitcoin Core daemon, you will use the command bitcoin-cli (Bitcoin command line interface). Note: it may take up to several minutes for Bitcoin Core to start, during which it will display the following message whenever you use bitcoin-cli:
error: {"code":-28,"message":"Verifying blocks..."}
After it starts, you may find the following commands useful for basic interaction with your node:
to safely stop your node, run the following command:
bitcoin-cli stop
A complete list of commands is available in the Bitcoin.org developer reference.
When Bitcoin Core daemon first starts, it will begin to download the block chain. This step will take at least several hours, and it may take a day or more on a slow Internet connection or with a slow computer. During the download, Bitcoin Core will use a significant part of your connection bandwidth. You can stop Bitcoin Core at any time using the stop command; it will resume from the point where it stopped the next time you start it.
Optional: Start Your Node At Boot
Starting your node automatically each time your computer boots makes it easy for you to contribute to the network. The easiest way to do this is to start Bitcoin Core daemon from your crontab. To edit your crontab, run the following command:
crontab -e
@reboot bitcoind -daemon Save the file and exit; the updated crontab file will be installed for you. Now Bitcoin Core daemon will be automatically started each time your reboot your computer.
If you’re an Ubuntu expert and want to use an init script instead, see this Upstart script.
You have now completed installing Bitcoin Core. If you have any questions, please ask in one of Bitcoin’s many communities, such as Bitcoin StackExchange, BitcoinTalk technical support, or the #bitcoin IRC chatroom on Freenode.
To support the Bitcoin network, you also need to allow incoming connections. Please read the Network Configuration section for details.
Network Configuration
If you want to support the Bitcoin network, you must allow inbound connections.
When Bitcoin Core starts, it establishes 8 outbound connections to other full nodes so it can download the latest blocks and transactions. If you just want to use your full node as a wallet, you don’t need more than these 8 connections—but if you want to support lightweight clients and other full nodes on the network, you must allow inbound connections.
Servers connected directly to the Internet usually don’t require any special configuration. You can use the testing instructions below to confirm your server-based node accepts inbound connections.
Home connections are usually filtered by a router or modem. Bitcoin Core will request your router automatically configure itself to allow inbound connections to Bitcoin’s port, port 8333. Unfortunately many routers don’t allow automatic configuration, so you must manually configure your router. You may also need to configure your firewall to allow inbound connections to port 8333. Please see the following subsections for details.
Testing Connections
The BitNodes project provides an online tool to let you test whether your node accepts inbound connections. To use it, start Bitcoin Core (either the GUI or the daemon), wait 10 minutes, and then visit the GetAddr page (https://getaddr.bitnodes.io/). The tool will attempt to guess your IP address—if the address is wrong (or blank), you will need to enter your address manually.
For more instruction and reviews based off BTC please follow my subreddit /BTC_Reviews
all material from this post was found here --> https://bitcoin.org/en/full-node
submitted by Mattjhagen to Bitcoin [link] [comments]

Features of Database Management System Smartwatch Iwo12 How to Pick Stocks - Investing for Beginners. Blocknet Linux Wallet Upgrade, Install or run Qt from Command Line ProgrammingKnowledge - YouTube

Replace 'bitcoin-0.20.0-win64-setup.exe' with the name of the file you actually downloaded. certUtil -hashfile bitcoin-0.20.0-win64-setup.exe SHA256 Ensure that the checksum produced by the command above matches one of the checksums listed in the checksums file you downloaded earlier. As of v0.18.1 I can use test_bitcoin-qt -platform cocoa to run GUI tests; this opens and closes a regtest GUI a bunch of times. As of master (6e4f655) it seems to ignore the -platform cocoa and just run the test as with minimal. As seen I'm trying to communicate with the new Bitcoin-Qt -server via a command line on Mac. I run ./Bitcoin-Qt -server, the application starts, but my terminal window is stuck on an empty line (no matter what I type in, there is no response). The simplest way to start from scratch with the command line client, automatically syncing blockchain and creating a wallet, is to just run this command (without arguments) from the directory containing your bitcoind binary: ./bitcoind To run with the standard GUI interface: ./bitcoin-qt Command-line arguments contrib/spendfrom is a python-language command-line utility that demonstrates how to use the “raw transactions” JSON-RPC api to send coins received from particular addresses (also known as “coin control”). New/changed settings (command-line or bitcoin.conf file) dbcache : controls LevelDB memory usage.

[index] [8460] [8179] [5326] [24828] [3760] [31180] [11138] [959] [8933] [21437]

Features of Database Management System

Qt also Pronounce “Cute” is a Cross platform application development framework. Qt is a cross-platform application and UI framework. Using Qt, you can write applications once and deploy them ... This is a quick tutorial on how to upgrade or install the Blocknet wallet from the Linux Command Line. This is difficulty level of easy to moderate depending upon your comfort with the command ... in this video i am going to show How to Install FFMPEG on macOS. FFmpeg is a free software project that produces libraries and programs for handling multimedia data. FFmpeg includes libavcodec, an ... Get here a portable setup to handle the command line interpreting for making tutorials, images, convert to the same formats for opening, and sharing. #ReaConverter_Crack_2021 #ReaConverter_Crack ... In this video you can get the knowledge about Data Dictionary, Backup and Recovery, security given by the DBMS, why we generate reports or which program is used to create attractive reports etc.

Flag Counter