Found a 6.6gb 'Bitcoin' folder hidden on my computer

Issue upgrading my bitcoin node

Hello,
I'm trying to update my current node (v0.18.1.0). I'm running my node on Mac using an external HD.
Everything is on my HD except for the bitcoin.conf file and the Bitcoin Core icon in my Applications folder.
I was able to launch my node using the icon on my Application folder (bitcoin-qt) or using the command line (bitcoind)
Since I downloaded the new version (v0.19.0.1), I have the following issue:
When I launch my node using the icon on my Application folder (bitcoin-qt) everything is fine and the new version is running (using the data in my external HD), but when launch the node using the command line (bitcoind), it still launch the old version.
Is there a separate update from bitcoind? I've done some research online but I didn't find anything helpful.
Thank You!!!
***EDIT***
I have downloaded "bitcoin-0.19.0.1-osx64.tar.gz" which include the executable for bitcoind, bitcoin-cli, etc and replace the old ones by the new ones and everything looks fine!
submitted by germmmmmm to Bitcoin [link] [comments]

(Updated) [Staking] Reddcoin Core client GUI wallet on a Raspberry Pi Model 3B

Intro

This thread is an update to my first Reddcoin staking tutorial that was written 7 months ago.
 
The reason for the update
My Reddcoin Core software crashed and became unusable. My Raspberry Pi 3B would lag and freeze, I couldn't stake anymore.
 
Instead of just redoing everything the same way, I wanted to see if I could improve on 3 points:
 
The updates
 
If you would like to tip me
Writing a tutorial like this takes time and effort; tips are appreciated. My Reddcoin address: RqvdnNX5MTam855Y2Vudv7yVgtXdcYaQAW.
     

Overview

 

Steps

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
     

Video

https://www.youtube.com/watch?v=Snr5e8bzftI
This video shows how long it takes to start Reddcoin Core.   TL;DR:
     

Extra

Backup
Backup your wallet to prevent losing the RDDs in your wallet! There are two methods to backup, do both. Make new backups if you create a new receiving address!
 
 
   
Boot with only 1 USB drive plugged in:
Make sure only the USB drive (with the swap partition and data partition) is plugged in when you boot up your Raspberry Pi. This to make sure the swap partition (/dev/sda1) is recognized correctly.   If you boot up with multiple USB drives, Lubuntu might see the USB drive with the swap partition as the second drive (instead of the first drive), and ignore the 2 GB swap partition. If this happens, starting Reddcoin can render the Raspberry Pi unresponsive.
   
Connection issues If you have issues syncing the blockchain because you have 0 network connections, please follow the instructions in this thread.
   
Start Reddcoin Core easier
Run a shell script (.sh file), so you can start Reddcoin just by double clicking on an icon on your Desktop.
   
Minimization options
Adjust minimization options, so you can safely press on the X button (the close/exit button on the upper right corner).
   
RealVNC VNC Viewer (client) and VNC Connect (server): To remote connect to the Raspberry Pi, I use VNC Viewer ad VNC Connect from RealVNC.
 
   
Chromium as browser: The updates break Firefox, the browser crashes when you try to run it. Install another browser, Chromium, to solve this issue.
   
Updates / Upgrades
If Software Updater shows up and tells you that there is updated software available, do not install the updates using Software Updater. Use LXTerminal to update Lubuntu.  
     

Credits:

   
Credits in previous tutorial:
submitted by Yavuz_Selim to reddCoin [link] [comments]

Bitcoin 2 Core v.2.2 Wallets Released!

Now available for download at https://www.bitc2.org/#wallets and https://github.com/BITC2/bitcoin2/releases
Version 2.2 Change log:
Updating your Bitcoin 2 Core wallet to this version is mandatory. That includes upgrading all your Masternodes. After enough nodes have upgraded to this version, a new staking protocol will be activated and the old nodes that fail to upgrade their wallet before that will end up forking to the wrong chain. Estimated time of this protocol upgrade is between August 21 - August 24 2019. As soon as possible.
To update, you just need to download the archive, stop your wallet and let it fully shutdown, and then copy the executable files in the bitcoin2-bin folder to replace the ones you had installed already.
After upgrading your Masternode and your desktop wallet, you should go in the Masternodes tab on your controller wallet and click to Start the upgraded Masternodes.
Binaries for a couple of platforms that are less used are still to be compiled.
submitted by Giradone to bitc2 [link] [comments]

Gridcoin Research 3.7.12.0 Released

The Gridcoin Developers are pleased to unveil 3.7.12 to you today, which is a massive release featuring over 450 commits over the last couple months. While being a large update it is still leisure, and users do not have to update.
Download the update from GitHub here.
The Windows MSI can be downloaded here.
 
Rather than posting the full release notes (because that would be ridiculous given the number of changes), I will instead showcase some of the more prominent and exciting features in this release. If you would like the full unedited changelog please see the Github commit list here.
 
New changes in this release include:

Gridcoin Research is now a 64 bit installation

New UI

NewUI

RPC Overhaul

New AutoTools Build System

Neural Network Enhancements

 
These are far from all the changes, but these five are the ones we would like to specifically showcase for the average wallet user. We hope you will be happy with the new release and look forward to your feedback.
 
As always, thank you to all the developers who contributed to this release, including but not limited to: @ravonn, @ifoggz, @tomasbrod, @thecharlatan, and @jamescowens.
 
I would also like to thank all our dedicated testnet users who helped to find bugs and issues to ensure a smooth release. Special thanks to @noah-blaker, @jamescowens (again!), and @GlenArm for going the extra mile to assist debugging tricky last minute issues.
submitted by barton26 to gridcoin [link] [comments]

[PSA] Dogecoin Wallet version 1.4 released. You must update.

WARNING: DO NOT send your wallet.dat file or dogecoin folder to anyone. There have been reports of people offering to help others by asking them to send their files to them so they can help. DO NOT do this. Scam attempt picture
Always encrypt your wallet! I can't express this enough. You should use a strong password longer than 15 characters. This password should contain numbers, symbols, and some capitalization! There is no need to have your wallet open 24 hours a day. Open it only when you need it. See - 'Getting Started' on the side bar.
This entire post has been written to be as close to ELI5 (Explain it like I'm 5) as possible - By request! If anyone wants to add/fix/correct anything in this message, please send a message to the mods <<-- Click blue text.
All blue text in this post can be clicked on. The blue text is a link to a picture, site or download file.
A very important message/reminder below.
25 Jan 1.5 pre-releases have started.
http://www.reddit.com/dogecoin/comments/1uhpwf/dogecoin_for_mac_14_topic_thread/
OLD VERSIONS The 1.4 update for the dogecoin wallet has been released. This update addresses the block chain error that occurred. This update is mandatory meaning you have to do this update. Also further down the page you can read up about the block chain. You MUST make sure you're on the correct block chain and the old block chain has been removed.
For a Windows computer the version must be 1.4. - 1.4.1 just released! See below
For a Apple Mac Computer the version must be 1.4
Download links:
[Windows Download Link](https://github.com/dogecoin/dogecoin/releases/download/1.4/dogecoin-qt-v14-Win.zip) <<--Click to start download
Windows Download Link 1.4.1 UPDATED 19JAN
Mac Download Link <<--Click to start download
Mac users can join this thread if there are any problems
Android (phone): Please see This post
To update, simply download the new version from the download link above. Open the downloaded file and extract the contents of the downloaded file into any new folder or location on your computer. If you put the files into a folder you can name the folder anything you want but make sure you remember that this is the latest version of the software.
You don't have to remove your folder containing the old version of the wallet. You can place it in a folder called 'Old versions of dogecoin wallet' if you like.
Now you can click on the Dogecoin icon contained in the new folder to open your version 1.4 wallet.
What happens if I get an error when I open the new wallet?
An error was reported called "11DbException"
If this happens Download this file and place it in the same folder as your updated wallet. Open the file you just downloaded called "Dogecoin OPEN' and wait. This might take 2 or 3 minutes.
Also jtlarousse has found a solution that worked on Windows. Please follow carefully and make backups before starting.
Reebzy might have found a solution for Apple Mac
Blockchain fork 101: The block chain is a ledger or document created containing every transaction that has ever happened. This file can be quite large. Bitcoins ledger is over 15GB. At some point this document/ledger split into two separate documents known as a fork.
How do I know if I am on the right block chain?
Go to your newly updated dogecoin wallet and open it. Click on Help>>Debug next Observe the current block number
*Note the example numbers in the pictures might be out of date by the time you read them
Now go over to http://dogechain.info/chain/Dogecoin . This website is the official Dogecoin blockchain website. Check the block number they're reporting
The number you found in your wallet and the number reported on the website should close. There might be a difference of 100 blocks depending on when you last refreshed your wallet or how long it took for you to get from one step to the next step in this guide and if the dogechain website is lagging.
I'M NOT ON THE CORRECT BLOCK CHAIN
My numbers are very different. How do I get back onto the right block chain?
IMPORTANT
For windows:
1)Close down the Dogecoin wallet client.
2)Go to your data folder: C:\Users[your windows log-in name]\AppData\Roaming\DogeCoin
3)Delete the Dogecoin.conf file. Do not delete the wallet.dat file!
4)Download this update file and place it into the Dogecoin folder where the other file was deleted.
For Apple Mac:
1)Close down the Dogecoin wallet client.
2)Go to your data folder: ~/Libarary/Application Support/Dogecoin
3)Delete the Dogecoin.conf file. Do not delete the wallet.dat file!
4)Download this update file and place it into the Dogecoin folder where the other file was deleted.
Next visit this post by Netcodepool for instructions on how to manually download the correct block chain and install it.
Much Thanks. 
Edit: Some posts were removed from this thread. To limit confusion.
Check this post for details about mining pools that were/are using the wrong fork.
Did you send coins only to find out you're on the wrong chain? See this post to get them back
An Apple Mac support thread has been made by voidref (The mac developer). If you're having troubles please see this thread
Some shibes have reported their wallets wont sync. Please check to make sure your firewall, antivirus, malware scanner or similar programs are not blocking it the wallet. You can add rules to these programs to allow the wallet to make contact with the internet. It's not advised but possible to also disable the software for a short amount of time. Don't forget to enable the software again afterwards.
Is your wallet crashing? Try this helpful tip from gandhikahn or if you're using windows try the 1.4.1 update above.
submitted by 42points to dogecoin [link] [comments]

[Staking] Reddcoin Core client GUI wallet on a Raspberry Pi Model 3B

This tutorial has been updated: https://www.reddit.com/reddCoin/comments/a0wn1v/updated_staking_reddcoin_core_client_gui_wallet/.
   

Intro

I want to stake Reddcoins on my Raspberry Pi, but there is no easy to install package for the Reddcoin Core client. I found some tutorials (mentioned at the bottom, under 'credits'), but I still struggled to get the result I wanted. It took some small adjustments, but I got the GUI Wallet of Reddcoin Core working on my Raspberry Pi Model 3B. See the steps below. :).
 
If you have any questions or comments, please post a comment in this thread, so others can also benefit from it.
 
If you would like to tip me: RqvdnNX5MTam855Y2Vudv7yVgtXdcYaQAW.
   
Even though Raspbian is the primary OS for the Raspberry Pi, it seems that it's not possible to build and compile the Reddcoin wallet software for Raspbian Stretch. However, I got the wallet compiled using Ubuntu MATE.
     

Overview

     

Steps

 
 
 
 
 
 
 
 
 
 
 
 
 
 
     

Extra

 
 
 
 
     

Credits:

 
Thank you all for sharing your knowledge!
submitted by Yavuz_Selim to reddCoin [link] [comments]

such beginner shibe thread wow how to get coin

 how to shibecoin v rich in minutes much instruct so simple any doge can do 

START HERE

UPDATE 1/21/14: I'm not updating this guide anymore. Most of the steps should still work though. See the wiki or check the sidebar for updated instructions.
Before you do anything else, you need to get a wallet. Until there's a secure online wallet, this means you need to download the dogecoin client.
Now open the client you just downloaded. You'll be given a default address automatically, and it should connect to peers and start downloading the dogechain (aka blockchain in formal speak). You'll know because there will be a progress bar at the bottom and at the lower right there should be a signal strength icon (TODO: add screenshots).
If you've waited 2 or 3 minutes and nothing is happening, copy this:
maxconnections=100 addnode=95.85.29.144 addnode=162.243.113.110 addnode=146.185.181.114 addnode=188.165.19.28 addnode=166.78.155.36 addnode=doge.scryptpools.com addnode=doge.netcodepool.org addnode=doge.pool.webxass.de addnode=doge.cryptopool.it addnode=pool.testserverino.de addnode=doge.luckyminers.com addnode=doge.cryptovalley.com addnode=miner.coinedup.comdoge addnode=doge.cryptoculture.net addnode=dogepool.pw addnode=doge.gentoomen.org addnode=doge.cryptominer.net addnode=67.205.20.10 addnode=162.243.113.110 addnode=78.46.57.132 
And paste it into a new text file called dogecoin.conf, which you then place into the dogecoin app directory.
Now restart your qt client and the blockchain should start downloading in about 1-2 minutes.
Once it finished downloading, you're ready to send and receive Dogecoins!

GETTING COINS

Decide how you want to get Dogecoin. Your options are:
I'll go into detail about each of these. I'm currently writing this out. I'll make edits as I add sections. Suggestions are welcome.

MINING

Mining is how new dogecoins are created. If you're new to crypto currencies, read this. To mine (also called "digging"), a computer with a decent GPU (graphics card) is recommended. You can also mine with your CPU, but it's not as efficient.

GPU MINING

These instructions cover only Windows for now. To mine, you'll need to figure out what GPU you have. It'll be either AMD/ATI or Nvidia. The setup for both is approximately the same.

Step One: Choose a pool

There's a list of pools on the wiki. For now it doesn't really matter which one you choose. You can easily switch later.
NOTE: You can mine in two ways. Solo mining is where you mine by yourself. When you find a block you get all the reward. Pool mining is when you team up with other miners to work on the same block together. This makes it more likely that you'll find a block, but you won't get all of it, you'll have to split it up with others according to your share of the work. Pool mining is recommended because it gives you frequent payouts, because you find more blocks. The larger the pool you join, the more frequent the payouts, but the smaller the reward you get.
Over a long period of time the difference between pool and solo mining goes away, but if you solo mine it might be months before you get any coins.

Step two: Set up pool account

The pool you chose should have a getting started page. Read it and follow the instructions. Instructions vary but the general idea is:
When you're done with this, you'll need to know:

Step three: Download mining software

For best performance you'll need the right mining software.
Unzip the download anywhere you want.

Step four: Set up miner

Create a text file in the same folder as your miner application. Inside, put the command you'll be running (remove brackets).
For AMD it's cgminer.exe --scrypt -o stratum+tcp://: -u -p
For Nvidia it's cudaminer.exe -o stratum+tcp://: -O :
Substitute the right stuff in for the placeholders. Then on the next line of the text file type pause. This will let you see any errors that you get. Then save the file with any name you want, as long as the file extension is .bat. For example mine_serverName.bat.

Step five: Launch your miner

Just open the .bat file and a command line window should pop up, letting you know that the miner is starting. Once it starts, it should print out your hash rate.
If you now go to the pool website, the dashboard should start showing your hashrate. At first it'll be lower than what it says in the miner, but that's because the dashboard is taking a 5 minute average. It'll catch up soon enough.
NOTE: A normal hashrate is between 50 Kh/s up to even 1 Mh/s depending on your GPU.

You're now mining Dogecoins

That's it, nothing more to it.

CPU MINING

CPU mining isn't really recommended, because you'll be spending a lot on more on power than you'd make from mining Dogecoin. You could better spend that money on buying Dogecoin by trading. But if you have free electricity and want to try it out, check out this informative forum post.

Trading

Trading has been difficult so far, but Dogecoin just got added to a few new exchanges. If you don't have a giant mining rig, this is probably the best way to get 100k or more dogecoins at the moment. I'll write up a more complete guide, but for now check out these sites:

Faucets

Faucets are sites that give out free coins. Usually a site will give out somewhere between 1 and 100 Dogecoin. Every site has its own time limits, but usually you can only receive coins once every few hours, or in some cases, days. It's a great way to get started. All you do is copy your address from the receive section of your wallet and enter it on some faucet sites. Check out /dogecoinfaucets for more. If you go to each site on there you might end up with a couple hundred Dogecoin!

Begging

This method is pretty straightforward. Post your receiving address, and ask for some coins. Such poor shibe. The only catch is, don't do it here! Please go to /dogecoinbeg.

Tips

At the moment there are two tip bots:
Other redditors can give you Dogecoin by summoning the tip bot, something like this:
+dogetipbot 5 doge
This might happen if you make a good post, or someone just wants to give out some coins. Once you receive a tip you have to accept it in a few days or else it'll get returned. Do this by following the instructions on the message you receive in your inbox. You reply to the bot with "+accept". Commands go in the message body. Once you do that, the bot will create a tipping address for you, and you can use the links in the message you receive to see your info, withdraw coins to your dogecoin-qt wallet, see your history, and a bunch of other stuff.
As a bonus, so_doge_tip has a feature where you can get some Dogecoins to start with in exchange for how much karma you have. To do this, send the message "+redeem DOGE" to so_doge_tip. You'll need to create a tipping account if you don't have one.
If you want to create a tipping account without ever being tipped first, message either of the bots with "+register" and an address will be created for you.

CHANGELOG

  • 1/21/14 - Added note about this thread no longer being updated
  • 1/21/14 - Changed wallet links to official site
  • 12/27/13 - Added 1.3 wallet-qt links
  • 12/21/13 - Added new windows 1.2 wallet link
  • 12/20/13 - Fixed +redeem text
  • 12/18/13 - Added short blurb on trading.
  • 12/18/13 - Updated cudaminer to new version (cudaminer-2013-12-18.zip).
  • 12/18/13 - Fixed +redeem link
  • 12/18/13 - Updates dogecoin.conf, from here.
  • 12/17/13 - Linked to mining explanation.
  • 12/17/13 - Added link to CPU mining tutorial, in response to this.
  • 12/16/13 - Added links to tip commands, link to dogetipbot wiki.
  • 12/16/13 - Note about tip commands going in body, in response to this.
  • 12/16/13 - Added link to cgminer mirror, thanks to scubasteve812 and thanks to Bagrisham.
  • 12/16/13 - Note about removing brackets in response to this.
  • 12/15/13 - Fixed hash rate as per this comment, thanks lleti
  • 12/15/13 - Added info for all other ways of getting money, except for trading (placeholder for now)
  • 12/15/13 - Added windows GPU mining instructions 12/15/13 - Added wallet instructions, list of how to get money
submitted by lego-banana to dogecoin [link] [comments]

[Guide] No hardware to mine? How to net 6,000+Ð/day using Windows Azure

Inspired by lleti 's free guide for using Amazon Web Services. However, from what I understand due to rental costs, it is more efficient to buy doge directly than use AWS. This guide is based on utilizing the $200 credit that comes with the Windows Azure cloud computing free trial, so you will not pay anything.
This is targeted at shibes with poor hardware that can only mine 50-200 doge per day, but it will work for everyone.
Disclaimer: Doge rate is an estimate based on current difficulties and market. Windows Azure trial may be US only (?)
Overview / How it works
You will not be mining doge directly with this method. Mining doge effeciently requires a GPU, which aren't found in traditional servers. Instead, we will be using the powerful CPUs provided with Windows Azure servers to mine a CPU based crypto-currency, such as QuarkCoin or SecureCoin, and convert those to doge.
Steps
1) Install your QRK or SRC wallet
Ideally if you are reading this, you have installed a dogecoin-qt wallet for yourself before. We will need to do the same for either QuarkCoin or SecureCoin. This is the wallet where will will send the coins you mine with your Windows Azure servers.
These are not the only CPU coin options, but QRK and SRC are very similar (same hash function) and simple to mine.
Once you have installed the wallet, it should look very similar to your DogeCoin wallet. If you have trouble downloading the blockchain ('out of sync'), look at these threads respectively to see which nodes you need to add to your config file. Config files are located at C:\Users\UserName\AppData\Roaming\CoinName.conf on Windows.
2) Set up a mining pool account
If you have joined a mining pool for DogeCoin, it will be a very similar experience for other alt coins. See the following bitcointalk threads which have a list of mining pools:
If you would like a pool recommendation, I can recommend src.coinmine.pl and qrk.coinmine.pl; this is from personal experience, I am not affiliated with them.
Once you are logged in you should also create 3 workers, as we will be setting up 3 servers, one for each server. So you should have 3 worker names, and a password set up for each worker.
3) Sign up for Windows Azure free trial
Link: www.windowsazure.com/en-us/pricing/free-trial/
You will have to provide a valid credit card and verify your account with a cell phone so they know you are a real person. This is a Microsoft product so they are reputable. Once you sign up, you will receive a $200 to use in 30 days. Remember to cancel when your credits are running out so they don't charge you.
4) Create Windows Server instances
I would recommend you watch this video which walks you through the UI of the Windows Azure management site to set up the virtual machines we need. Essentially we are going to do the following:
Thus we have a total of 20 CPU cores to mine QRK / SRC with. We want the the most CPU power we can get without excessively burning our $200 credit. That's why 2008 R2 is used, and only 3 instances of it.
5) Remotely connect to servers and download miner
This section is also covered in the video from section 4, watch it for a visual walkthrough.
Once the servers have been initialized on Microsoft's end, we should be able to access them under 'Virtual Machines' at www.manage.windowsazure.com. You should see each host name and a status, and when selected there should be an additional 'Connect' button - click it.
You should now be prompted to download a .rdp file. Download this for each of your 3 virtual machines to a folder you will remember. You will open this .rdp file and use the login credentials you previously specified to connect to each server.
Once you are remotely connected, you should see the desktop. Open up the first icon on the taskbar that looks like a server, this is your server manager. We need to open up the 'Configure IE ESC' setting that's visible on this pane. Make sure 'Off' is selected for both admins and users on the IE ESC configuration.
Now, open up the IE browser and navigate to https://docs.google.com/file/d/0B9cvOfoOekSdVzZZcThLZHg4bjA/edit. Press Ctrl + S to download the entire zip to the desktop, and un-zip it.
6) Configure and start miner
Again, this is pretty much covered in the video from section 4, if you prefer watching.
You should now have a folder on your server's desktop named quark-v2_w64. This is the miner for both QRK and SRC. We are going to be using minerd64_sse4.exe. Create a shortcut to minerd64_sse4.exe within the same folder. We now need to add the parameters for your miner.
Right click on your minerd64_sse4.exe shortcut -> Properties. Look at the target field, it should look like this:
C:\Users\UserName\Desktop\quark-v2_w64\minerd64_sse4.exe
We are going append the following format to this target field
-a quark -t 8 -o stratum+tcp://src.coinmine.pl:6020 -u user.worker -p password
-a: algorithm, both SRC and QRK use 'quark'
-t: number of cores (so either 8 or 4 for our purposes)
-o: mining pool information (url and port).
-u: account you have for your mining pool, then a period, then a worker name
-p: password that you created for the worker in step 2
So here is an example of what the target field of your shortcut should look like when you are done:
C:\Users\Nexic\Desktop\quark-v2_w64\minerd64_sse4.exe -a quark -t 8 -o stratum+tcp://src.coinmine.pl:6020 -u Nexic.worker1 -p pass1
7) Profit!!
If you set up your miners correctly on each Windows Server VM (I prefer to assign a separate worker to each one), you should be able to run them and see an output like this: http://i.imgur.com/3lECqSz.png. You can close your remote sessions without interrupting it.
How do you get the doge, you ask? Well, using the above setup I have earned 10 SecureCoins in the past 2 days. These are worth 0.00094 bitcoins (BTC) on Cryptsy at present. A doge is worth 0.0000007 BTC at present, so if I go from SRC -> BTC -> DOGE, I can turn 5 SRC to 6,642 DOGE on Cryptsy. There are also other exchanges, I won't go into how to exchange coins on this post. Remember, this is every day for about a week, for free!
Also, you can CPU mine on your own personal computers as well, not just the servers.
TL;DR
Mine QuarkCoin / SecureCoin using Windows Azure free trial, use Cryptsy (or other exchange) to convert to DOGE. Much more efficient than CPU mining Doge.
submitted by Nexic to dogecoin [link] [comments]

How to setup a Dogecoin Vanity Address!

WHAT IS A DOGE VANITY ADDRESS
Vanity addresses are ones where you can choose what characters appear somewhere in the address. For example, DPie5ucpypDTUsgquc3ea2Meg6TwpW6mW1. All Doge addresses must start with D (capital) and the second character must be a capital if it is a letter (not all letters accepted, for example I O Y W are not allowed as the second character). You can also create letters or words at the end or even beginning of the address such as:
Letters that I have found valid as second characters are: 5 6 7 8 9 A B C D E F G H J K L M N P Q R S T U
HOW TO CREATE YOUR VERY OWN DOGE VANITY ADDRESS
HOW TO IMPORT YOUR NEW DOGE VANITY ADDRESS INTO YOUR DOGECOIN-QT WALLET
For MultiDoge, see here
<3 pie
submitted by PieCrafted to dogecoin [link] [comments]

Hmmm? How do I get the correct balance out of the fullnode wallet?

As the full node wallet became available I downloaded and installed. Well basically it's still the bitcoin core bitcoin-qt desktop application.
Now I imported my private key in which there was bitcoin at the time of the split. I expected the amount of BTG to show up in the wallet and then go from here....
But it seems this full node wallet also shows when I spent my bitcoin after the split... I am confused: Isn't that the whole idea of the split that after importing the private key into the new wallet I only see the transactions I do or have done on the new chain and not the others as well...
Well, what a mess, how do I have to proceed to ensure the new wallet recognizes that amounts I spent AFTER the chain split are not relevant for the BTG chain? (Meaning I still get the coins in the wallet and they aren't marked as spent immediately....)
thx for some clarification here...
p.s.: btw, there really hasn't been time enough to seperate the modified bitcoin-qt from the original one? By default using the same folders and basic settings, also not even branding the title or icons - cmon, thats a job an intern can do in one hour... really disappointing...
submitted by piedro_k to BitcoinGoldHQ [link] [comments]

Bitcoin GENERATOR Software PC WITHOUT MINING FREE FULL VERSION New 2020 free bitcoin generator MAC WINDOWS version Working 100% all PC How to Download File from Creates effect Channel? How To Get 0 5 BTC Free BTC MINER ULTIMATE 2020 Best Free Bitcoin Mining Software 2020 Free Download BTC Miner Software

Bitcoin, Dash, Litecoin and every Altcoins has its own core wallet. While the looks of each and every wallet may vary slightly its functionalities remain the same. Whenever you open your QT wallet the first thing your wallet does is; it starts scanning all the recent blocks on the blockchain and tries to catch up with the network. Download Bitcoin Core. Bitcoin Core is the backbone of the Bitcoin network. Almost all Bitcoin wallets rely on Bitcoin Core in one way or another. If you have a fairly powerful computer that is almost always online, you can help the network by running Bitcoin Core. You can also use Bitcoin Core as a very secure Bitcoin wallet. Bitcoin Core initial synchronization will take time and download a lot of data. You should make sure that you have enough bandwidth and storage for the full block chain size (over 200GB). If you have a good Internet connection, you can help strengthen the network by keeping your PC running with Bitcoin Core and port 8333 open. Download all the file icons you need. Choose between 128691 file icons in both vector SVG and PNG format. Related icons include document icons, format icons, extension icons, folder icons Qt Bitcoin Trader. This software helps you open and cancel orders very fast. Real time data monitoring. Developed on pure Qt, uses OpenSSL, AES 256 key and secret protection. I want to develop this Trader App so that it can be configured for any rule and strategy. Next ToDo: - Add realtime charts - Make rules more advanced. Official website

[index] [384] [11885] [23613] [2133] [22366] [23776] [26099] [9463] [13475] [23094]

Bitcoin GENERATOR Software PC WITHOUT MINING FREE FULL VERSION

A very simple video tutorial showing you how to get started mining Bitcoin using your regular Windows desktop or Laptop computer. In this guide I'll take you through the entire process of mining ... These are the links to help you get your QT wallet synced and up to date DO NOT SEND YOUR COINS UNTIL THE WALLET IS SYNCED OR YOU WILL LOSE THEM. Download the wallet here : https://bitconnectcoin ... address,bitcoin atm business,bitcoin atm machine,a bitcoin storm is brewing,a bitcoin atm,a bitcoin wallet,a bitcoin miner,a moeda bitcoin,bitcoin billionaire,bitcoin blast,bitcoin bangla,bitcoin ... Please subscribe to my Channel: https://www.youtube.com/channel/UCp2H5Nwn6ry402F2pofZWXg Facebook: https://www.facebook.com/pages/Mrcluster87/152185951511384... address,bitcoin atm business,bitcoin atm machine,a bitcoin storm is brewing,a bitcoin atm,a bitcoin wallet,a bitcoin miner,a moeda bitcoin,bitcoin billionaire,bitcoin blast,bitcoin bangla,bitcoin ...

Flag Counter