CGMiner v4.1.11 (Download open source Bitcoin GPU miner

RX 5700 (NON XT) Mining Performance (7/28/2019)

**Disclaimer**
[Still testing, and Tuning but the new AMD RDNA Architecture is new and not only is AMD still optimizing drivers, the mining Developers who DO NOT get GPU's sent to them, are still working on optimizations. Please be patient with me as I continue to test and allow sufficient time for new miners to be developed.]
Same stuff different day just as with the RX 590 Fatboy and RTX 2080, I will be testing the RX 5700 over time as new miners come out, to compare price to performance for mining. Below are some of my results when testing the new AMD RX 5700 (Non XT) graphics card mining performance, now I was only able to get a few working. I did some videos on its Gaming performance and the "SoftPowerPlayTables" mod from Igor's Lab at Tom's Hardware, which allowed the RX 5700 to really stretch its legs. Allowing this Non-XT model to surpass the RTX 2060 Super and even get on par with the first Gen RTX 2070. Moving forward, as new miners are release I will update my numbers and test when I can.
***UPDATE: 7/31/19 - New Phoenix Miner 4.5c still only getting 2 - 4 Mhs, XMR Stak 2.10.7, only Algo that will run is RYO
***UPDATE: 9/15/19 - Updated Power Draw numbers, as my Watt Meter died, new one in and retested Algos below
***UPDATE: 12/14/19 - Updated and added Algos as miner support was implemented. Retesting with Radeon Adrenalin 2020 driver
***UPDATE: 1/22/19 - Updated additional miners as support was implemented. Retesting with Radeon Adrenalin 2020 driver (20.1.3)
RX 5700 GPU
Driver Currently in Use:
Mining Performance AMD DRIVER - Adrenalin Edition 19.9.1
OverdriveNTool 0.2.8
Average temps during mining
Stock Setup: 65c - 72c
Aggressive Fan Curve: 40% - 75%
Algo (Mining Program) / OC settings (volt mV) / Power draw

Claymore Miner (Updates will Follow) [ UPDATED 9/15/2019 got new Kill-A-Watt Meter ]
ETH (Claymore Miner V 15) STOCK*** 49.5 MHs 1750 Core (1037 mV) / Mem 1750 (850mV) 155 Watts
ETH (Claymore Miner V 15) SPPT Mod*** 51 MHs 1900 Core (1037mV) / Mem 1800 (850mV) 155 Watts
ETH (Claymore Miner V 15) SPPT Mod*** 53.2 MHs 1750 Core (990mV) / Mem 1850(850mV) 160 Watts
ETH (Claymore Miner V 15) SPPT Mod*** 53.5 MHs 1750 Core (990mV) / Mem 1860 (850mV) 160 Watts
ETH (Claymore Miner V 15) SPPT Mod*** [Best Config] 52.6 MHs 1325Core (900mV) / Mem 1860 (850mV) 115 Watts

Claymore Miner (Updates will Follow) [ UPDATED 9/15/2019 got new Kill-A-Watt Meter ]

ETH (Phoenix Miner) STOCK*** 48.8 MHs 1750 Core (1037 mV) / Mem 1750 (850mV) 155 Watts
ETH (Phoenix Miner) [Best Config] 53.4 Mhs 1250 Core (750 mV) / Mem 1850 (850 mV) 115 Watts

ProgPow | BCI - Bitcoin Interest (ethminer not working on Navi ATM)
Phoenix Miner 4.9c Stock 1.44 Mhs 1750 Core (1018mV) / Mem 1750 (850mV) 140 Watts
Phoenix Miner 4.9c 1.291 1500 Core (805mV) / Mem 1850 (850mV) 96 Watts
WildRig Multi Miner
Blake2b (WildRig Multi (0.20.1) 1.86 Ghs 1750 Core (1018mV) / Mem 1750 (850mV) 132 Watts
Blake2s (WildRig Multi (0.20.1) 4.7 Ghs 1750 Core (1018mV) / Mem 1750 (850mV) 128 Watts
BMW512 (WildRig Multi (0.20.1) 1.05 Ghs 1750 Core (1018mV) / Mem 1750 (850mV) 130 Watts
Lrya2Rev3 (WildRig Multi (0.20.1) 61.4 Mhs 1750 Core (1018mV) / Mem 1750 (850mV) 160 Watts
Lrya2Rev2 (WildRig Multi (0.19 Beta) 1.04 Khs 1750 Core (1018mV) / Mem 1750 (850mV) 160 Watts
Lrya2vCoban (WildRig Multi (0.19 Beta) 54.5 Mhs 1750 Core (1018mV) / Mem 1750 (850mV) 160 Watts
MTP (WildRig Multi (0.20.1) 2.5 Mhs 1750 Core (1018mV) / Mem 1750 (850mV) 152 Watts

XMR-Stak (Updates will Follow)
Cryptonight-GPU - RYO (XMRStak 2.10.8) 1.42 Khs (1 Thread) 1750 Core (1018 mV) / Mem 1750 (850mV) 132 Watts
Cryptonight-GPU - RYO (XMRStak 2.10.8) 1.62 Khs (2 Threads) 1750 Core (1018 mV) / Mem 1750 (850mV) 155 Watts
Cryptonight-GPU - RYO (XMRStak 2.10.8) 1.89 Khs (2 Threads) 1900 Core (1018 mV) / Mem 1750 (850mV) 160 Watts
Cryptonight-GPU - RYO (XMRStak 2.10.8) 1.89 Khs (2 Threads) Undervolt 1900 Core (1000 mV) / Mem 1750 (850mV) 155 Watts
Cryptonight-Conceal - CCX (XMRStak 2.10.8) 2.23 Khs (1 Thread) 1750 Core (1018 mV) / Mem 1750 (850mV) 116 Watts

XMR-Stak - Cryptonight-R
Cryptonight-R (XMRStak 2.10.7) 1.1 Khs (2 Threads) Undervolt 1325Core (800mV) / Mem 940 (850mV) 90 Watts
Cryptonight-R (XMRStak 2.10.7) 1.145 Khs (2 Threads) 1750 Core (1018 mV) / Mem 875 (850mV) 128 Watts

LOL miner - Grin 29
Grin29 (LoLMiner 0.8.8) 5.2 G/s 1750 Core (1037 mV) / Mem 1750 (850mV) 128 Watts
Grin31 (LoLMiner 0.9.3) 0.95 G/s 1750 Core (1037 mV) / Mem 1750 (850mV) 130 Watts

RX 5700 Mining Performance (WildRig - XMRStak)
submitted by cmvjax to gpumining [link] [comments]

Bitcoin Rhodium Mining Guide

Bitcoin Rhodium Mining Guide
Happy Mining!

All available XRC pools can be found on MiningPoolStats

Bitcoin Rhodium Mining Hardware

Baikal Giant+: 1.6 GH/s
Baikal Quad Cube: 1.2 GH/s
Baikal Giant: 900 MH/s
Baikal Quadruple Mini Miner: 600 MH/s
Baikal Miner Cube: 300 MH/s
Baikal Mini Miner: 150 MH/s

Mining Setup

To mine Bitcoin Rhodium you need to set up an XRC wallet and configure your miner of choice. You can choose between Web wallet, Electrum-XRC or Magnum wallet. To set up a web wallet please visit wallet.bitcoinrh.org. Or download and install Electrum-XRC wallet (recommended) for Windows, Linux and MacOS.
Web wallet: wallet.bitcoinrh.org
Electrum-XRC wallet: electrum.bitcoinrh.org
Magnum wallet: https://magnumwallet.co

Sign up for XRC web wallet if not yet done so

  1. Create an account, with your username, password and secure question.
  2. Sign in and click “Create Wallet”.
  3. Set up a strong transaction password. Make sure you store it securely in a secure password manager of choice.
  4. Copy the seed somewhere safe. It’d be a good idea to write seed on a hardcopy and keep it safe.
  5. Paste it to confirm you got it right.
  6. Grab an address for the mining step. Your wallet is now ready to mine XRC.

Instructions for mining XRC on the official pool

Pool link: poolcore.bitcoinrh.org
  1. Any miner that supports X13 will be able to mine XRC. We have a few examples below of miners that are well tested with Bitcoin Rhodium network.
  2. For any miner, configure the miner to point to:
(0–0.8 GH/s) stratum+tcp://poolcore.bitcoinrh.org:3061
(0.8–2 GH/s) stratum+tcp://poolcore.bitcoinrh.org:3062
(3–4 GH/s) stratum+tcp://poolcore.bitcoinrh.org:3063
(5+ GH/s) stratum+tcp://poolcore.bitcoinrh.org:3064
with your XRC address as username and x as password. You don’t need to open an account on pool. You will be mining to XRC address and mined coins will be transferred to your wallet
after blocks reach 10 block maturity
after you mined up minimal amount of coins (currently 0.1 XRC)
sometimes mined blocks could get rejected by network (orphaned) after they were counted as valid blocks. This is normal network behavior to follow longest chain
  1. http://poolcore.bitcoinrh.org is used to follow your miner and network statistics.

CPU Miner-Multi

Source: https://github.com/tpruvot/cpuminer-multi
Sample configuration with CPU Miner tested on UBUNTU.
{
“url” : “stratum+tcp://poolcore.bitcoinrh.org:3061”, “user” : “YOUR XRC ADDRESS”,
“pass” : “x”,
“algo” : “x13”, “threads” : 1,
“cpu-priority” : 5,
“cpu-affinity” : 1, “benchmark” : false, “debug” : true, “protocol”: true, “show-diff”: true, “quiet” : false
}
Command to run your CPUMiner: cpuminer -c cpuminer.json

SGMiner (ATI GPU)

SGMiner is a GPU-based mine: https://github.com/nicehash/sgminereleases
The configuration below was tested on Windows:
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
cd C:\Software\sgminer-5.6.1-nicehash-51-windowsamd64 sgminer.exe
— gpu-platform 1 — algorithm x13mod -url stratum+tcp://poolcore.bitcoinrh. org:3062 — pool-user — userpass :x — auto-fan — temp-target 70 — temp-over- heat 82 — temp-cutoff 85 — gpu-fan 65–85 — log-file log.txt — no-adl — no-extra- nonce -P –T

CCMiner (NVIDIA GPU)

CCMiner is a GPU-based miner (NVIDIA)
Command to run your CCMINER:
ccminer-x64.exe -a x13 -o stratum+tcp://poolcore.bitcoinrh.org:3062 -O :without -D — show-diff

Baikal miner

Settings: Url:
(0–2 GH/s) stratum+tcp://poolcore.bitcoinrh.org:3062
(3–4 GH/s) stratum+tcp://poolcore.bitcoinrh.org:3063
(5+ GH/s) stratum+tcp://poolcore.bitcoinrh.org:3064
Algo: x13User: your XRC receiving address (make sure you set 2 distinct addresses for each hashing board)
Pass: x
Extranonce: leave off Priority set to 0 and 1
Once pool stratum address and your wallet as user are set up you should see your miner mining against XRC pool. When miner is working the status column is green. The pool and miner are incorrectly configured now as status says “Dead” highlighted in red.

Instructions for mining XRC on BSOD pool

Pool link: bsod.pw/en/pool/dashboard/XRC/
Use this code for your miner: -a x13 -o stratum+tcp://pool.bsod.pw:2582 -u WALLET.rig
BSOD pool allows both solo and party mining.
For solo mining use code: -a x13 -o stratum+tcp://pool.bsod.pw:2582 -u WALLET.rig -p m=solo And for party mining use: -a x13 -o stratum+tcp://pool.bsod.pw:2582 -u WALLET.rig -p m=party.yourpassword
NOTICE: You can use us for North America and asia for Asia instead of euin your .bat file or config.
You can also use BSOD pool’s monitor app for Android and iOS.

Instructions for mining XRC on ZERGPOOL

Zergpool offers low fees (just 0.5%) and also SOLO and PARTY mining with no extra fees.
To mine XRC on Zergpool use this command lines for your miner:
Regular: -a x13 -o stratum+tcp://x13.mine.zergpool.com:3633 -u -p c=XRC,mc=XRC Solo: -a x13 -o stratum+tcp://x13.mine.zergpool.com:3633 -u -p c=XRC,mc=XRC,m=solo Party: -a x13 -o stratum+tcp://x13.mine.zergpool.com:3633 -u -p c=XRC,mc=XRC,m=party
Use your coin wallet address as username in mining software. Specify c=SYMBOL as password to identify payout wallet coin, and the same coin in mc=SYMBOL to specify mining coin.
For more information and support please visit http://zergpool.com
Notice that when there are more pools mining XRC in different geographic/availability locations choose the nearest to you as lowest priority and then add desirable fall back pool options in different geographic locations or pools. This is useful when one pool experiences issues, to fall back to different pool in Bitcoin Rhodium network.

Calculate your Bitcoin Rhodium mining profitability

WhatToMine: https://whattomine.com/coins/317-xrc-x13
CoinCalculators: https://www.coincalculators.io/coin/bitcoin-rhodium

Feel free to ask questions in Discord community. There are lots of helpful people around the world watching XRC 24x7.

Bitcoin Rhodium Dev Team
submitted by BitcoinRh to BitcoinRhodium [link] [comments]

I literally have tens of thousands of dollars in top-shelf hardware, looking to repurpose some before selling on eBay to build a NAS system, possibly a dedicated firewall device as well. o_O

Q1) What will you be doing with this PC? Be as specific as possible, and include specific games or programs you will be using.**

A1) This will be a dedicated NAS system for my home network. As such, I'm looking to have it:

- Host ##TB's of 720, 1080 & up resolution Movies and TV Shows I'm about to begin ripping from a MASSIVE DVD & Blueray collection I have.

- My kids are big on Minecraft. I understand it's possible to host your own "worlds" (or whatever they call the maps you can build) on your own "server". I think it would be pretty neat to offer them (& their friends - if can be done 'safely/securely') their own partition on one of my NAS HDD's.

- I also have accounts with a couple diff VPN companies... I understand it's possible (?) to sync said VPN's with a NAS, this might be a more relative topic on the next point/purpose...

- I'd like to be able to remotely link to this NAS for when I travel overseas and want to stream at my temp location from my house/this NAS.
______________________
Q2) What is your maximum budget before rebates/shipping/taxes?**

* A2) Here's where I make matters more complicated than most others would... I've been an advocate for Bitcoin and crypto-currencies in general since 2013. I invested in a small mining outfit back in 2014 (strictly Bitcoin/ASIC's). One of my buddies is the President of a large-scale mining operation (foreign and domestic) and he convinced me to dabble in the GPU mining-space. I made my first hardware purchase in Q4, 2017 and launched a small-scale GPU-Farm in my house since then. I had the rigs mining up until Q3 of 2018 (not cost-efficient to keep on, especially living in SoFlo) and since then, the hardware's been collecting dust (& pissing off my family members since they lost access to 3X rooms in the house - I won't let anyone go near my gear). One of my New Years Resolutions for 2019 was to clear out the house of all my mining equipment so that's all about to go up on eBay. So "budget" is relative to whatever I "MUST" spend if I can't repurpose any of the parts I already have on hand for this build... (Anyone having something I "need" and is looking to barter for one of the items I'll list later on in here, LMK).
______________________
Q3) When do you plan on building/buying the PC? Note: beyond a week or two from today means any build you receive will be out of date when you want to buy.**

A3) IMMEDIATELY! :)
______________________
Q4) What, exactly, do you need included in the budget? (ToweOS/monitokeyboard/mouse/etc\)**

A4) Well I had a half-assed idea approximately 1 year ago that it might be wise to build a bunch of 'gaming rigs' to sell on eBay with my intended repurposed mining hardware so I went on a shopping spree for like 6 months. That said; I've got a plethora of various other components that aren't even unboxed yet. 90% of the items I've purchased for this additional project were items that were marked down via MIR (mail-in-rebates) & what-not...
AFAIK, there are only 3X items I absolutely do not have which I 'MUST' find. Those would be - 1) Motherboard which accepts "ECC RAM". 2) CPU for said MOBO. 3) Said "ECC RAM".\* 
______________________
Q5) Which country (and state/province) will you be purchasing the parts in? If you're in US, do you have access to a Microcenter location?**

A5) I'm located in Southwest Florida. No Microcenter's here. Best Buy is pretty much my only option although I am a member of Newegg, Amazon & Costco if that makes any difference?
______________________
Q6) If reusing any parts (including monitor(s)/keyboard/mouse/etc), what parts will you be reusing? Brands and models are appreciated.**

A6) In an attempt to better clean up this Q&A, I'm going to list the items I have on-hand at the end of this questionnaire in-case passers-by feel like this might be a TLDR.* (Scroll to the bottom & you'll see what I mean).
______________________
Q7) Will you be overclocking? If yes, are you interested in overclocking right away, or down the line? CPU and/or GPU?**

A7) I don't think that's necessary for my intended purpose although - I'm not against it if that helps & FWIW, I'm pretty skilled @ this task already (it's not rocket science).
______________________
Q8) Are there any specific features or items you want/need in the build? (ex: SSD, large amount of storage or a RAID setup, CUDA or OpenCL support, etc)**

A8) As stated in A4; ECC RAM is non-negotiable... RAID seems like a logical application here as well.

- This will predominantly be receiving commands from MacOS computers. I don't think that matters really but figured it couldn't hurt to let you guys know.\*

- I'd also be quite fond of implementing "PFSENSE" (or something of that caliber) applied to this system so I could give my Netgear Nighthawks less stress in that arena, plus my limited understanding of PFSENSE is that it's ability to act as a firewall runs circles around anything that comes with consumer-grade Wi-Fi routers (like my Nighthawks). Just the same, I'm open to building a second rig just for the firewall.\*

- Another desirable feature would be that it draws as little electricity from the wall as possible. (I'm EXTREMELY skilled in this arena. I have "Kill-A-Watts" to test/gauge on, as well as an intimate understanding of the differences between Silver, Gold, Platinum and Titanium rated PSU's. As well as having already measured each of the PSU's I have on-hand and taken note of the 'target TDP draw' ("Peak Power Efficiency Draw") each one offers when primed with X amount of GPU's when I used them for their original purpose.\*

- Last, but not least, sound (as in noise created from the rig). I'd like to prop this device up on my entertainment center in the living room. I've (almost) all of the top-shelf consumer grade products one could dream of regarding fans and other thermal-related artifacts.

- Almost forgot; this will be hosting to devices on the KODI platform (unless you guys have better alternative suggestions?)
______________________
Q9) Do you have any specific case preferences (Size like ITX/microATX/mid-towefull-tower, styles, colors, window or not, LED lighting, etc), or a particular color theme preference for the components?**

A9) Definitely! Desired theme would be WHITE. If that doesn't work for whatever reason, black or gray would suffice. Regarding "Case Size". Nah, that's not too important although I don't foresee a mini-ITX build making sense if I'm going to be cramming double digit amounts of TB in the system, Internal HDD's sounds better than a bunch of externals plugged in all the USB ports.
______________________
Q10) Do you need a copy of Windows included in the budget? If you do need one included, do you have a preference?**

A10) I don't know. If I do need a copy of Windows, I don't have one so that's something I'll have to consider I guess. I doubt that's a necessity though.
______________________
______________________
______________________
**Extra info or particulars:*\*

AND NOW TO THE FUN-STUFF... Here's a list of everything (PARTS PARTS PARTS) I have on-hand and ready to deploy into the wild &/or negotiate a trade/barter with:

CASES -
Corsair Carbide Series Air 540 Arctic White (Model# Crypto-Currency-9011048-WW) - (Probably my top pick for this build).
Cooler Master HAF XB EVO (This is probably my top 1st or 2nd pick for this build, the thing is a monster!).
Cooler Master Elite 130 - Mini ITX - Black
Cooler Master MasterBox 5 MID-Tower - Black & White
Raidmax Sigma-TWS - ATX - White
MasterBox Lite 5 - ATX - Black w/ diff. Colored accent attachments (included with purchase)
NZXT S340 Elite Matte White Steel/Tempered Glass Edition
EVGA DG-76 Alpine White - Mid Tower w/ window
EVGA DG-73 Black - Mid Tower w/ window (I have like 3 of these)

______________________
CPU's -
***7TH GEN OR BELOW INTEL's ("Code Name Class mentioned next to each one)**\*
Pentium G4400 (Skylake @54W TDP) - Intel ARK states is "ECC CAPABLE"
Celeron G3930 (Kaby Lake @ 51W TDP) - Intel ARK states is "ECC CAPABLE" :)
i5 6402P (Skylake @65W TDP) - Intel ARK states is "NOT ECC CAPABLE" :(
i5 6600k (Skylake @ 91W TDP) - Intel ARK states is "NOT ECC CAPABLE" :(
i7 6700 (Skylake @ 65W TDP) - Intel ARK states is "NOT ECC CAPABLE" :(
i7 7700k (Kaby Lake @ 95W TDP) - Intel ARK states is "NOT ECC CAPABLE" :(


***8TH GEN INTEL's **\*
i3-8350K (Coffee Lake @91W TDP) - Intel ARK states is "ECC FRIENDLY" :)
I5-8600K (Coffee Lake @95W TDP) - Intel ARK states is "NOT ECC CAPABLE" :(


***AMD RYZEN's **\*
Ryzen 3 2200G
Ryzen 5 1600
Ryzen 7 1700X

______________________
MOTHERBOARDS -

***7TH GEN AND BELOW INTEL BASED MOBO'S - **\*
MSI Z170A-SLI
ASUS PRIME Z270-A
ASUS PRIME Z270-P
ASUS PRIME Z270-K
EVGA Z270 Stinger
GIGABYTE GA-Z270XP-SLI
MSI B150M ARCTIC
MSI B250M MICRO ATX (PRO OPT. BOOST EDITION)

***8TH GEN INTEL BASED MOBO'S - **\*
EVGA Z370 FTW
GIGABYTE Z370XP SLI (Rev. 1.0)
MSI Z370 SLI PLUS


***AMD RYZEN BASED MOBO'S - **\*
ASUS ROG STRIX B350-F GAMING
MSI B350 TOMAHAWK
MSI X370 GAMING PRO
ASROCK AB350M PRO4
______________________


RAM -

Way too many to list, nothing but 4 & 8GB DDR4 sticks and unfortunately, none are ECC so it's not even worth mentioning/listing these unless someone reading this is willing to barter. At which time I'd be obliged to send an itemized list or see if I have what they're/you're specifically looking for.\*
______________________
THERMAL APPLICATIONS/FANS -
JUST FANS -
BeQuiet -
Pure Wings 2 (80mm)
Pure Wings 2 (120mm)
Pure Wings 2 (140mm)
Silent Wings 3 PWM (120mm)

NOCTUA -
PoopBrown - NF-A20 PWM (200mm) Specifically for the BIG "CoolerMaster HAF XB EVO" Case
GREY - NF-P12 Redux - 1700RPM (120mm) PWM
Corsair -
Air Series AF120LED (120mm)

CPU COOLING SYSTEMS -
NOCTUA -
NT-HH 1.4ml Thermal Compound
NH-D15 6 Heatpipe system (this thing is the tits)

EVGA (Extremely crappy coding in the software here, I'm like 99.99% these will be problematic if I were to try and use in any OS outside of Windows, because they barely ever work in the intended Windows as it is).
CLC 240 (240mm Water-cooled system
CRYORIG -
Cryorig C7 Cu (Low-Profile Copper Edition*)

A few other oversized CPU cooling systems I forget off the top of my head but a CPU cooler is a CPU cooler after comparing to the previous 3 models I mentioned.
I almost exclusively am using these amazing "Innovation Cooling Graphite Thermal Pads" as an alternative to thermal paste for my CPU's. They're not cheap but they literally last forever.

NZXT - Sentry Mesh Fan Controller
______________________
POWER SUPPLIES (PSU's) -
BeQuiet 550W Straight Power 11 (GOLD)

EVGA -
750P2 (750W, Platinum)
850P2 (850W, Platinum)
750T2 (750W, TITANIUM - yeah baby, yeah)

ROSEWILL -
Quark 750W Platinum
Quark 650W Platinum

SEASONIC -
Focus 750W Platinum
______________________
STORAGE -
HGST Ultrastar 3TB - 64mb Cache - 7200RPM Sata III (3.5)
4X Samsung 860 EVO 500GB SSD's
2X Team Group L5 LITE 3D 2.5" SSD's 480GB
2X WD 10TB Essential EXT (I'm cool with shucking)
+ 6X various other external HDD's (from 4-8TB) - (Seagate, WD & G-Drives)
______________________

Other accessories worth mentioning -
PCI-E to 4X USB hub-adapter (I have a dozen or so of these - might not be sufficient enough &/or needed but again, 'worth mentioning' in case I somehow ever run out of SATA & USB ports and have extra external USB HDD's. Although, I'm sure there would be better suited components if I get to that point that probably won't cost all that much).
______________________
______________________
______________________
Needless to say, I have at least 1X of everything mentioned above. In most all cases, I have multiples of these items but obviously won't be needing 2X CPU's, Cases, etc...

Naturally, I have GPU's. Specifically;

At least 1X of every. Single. NVIDIA GTX 1070 TI (Yes, I have every variation of the 1070 ti made by MSI, EVGA and Zotac. The only brand I don't have is the Gigabyte line. My partners have terrible experience with those so I didn't even bother. I'm clearly not going to be needing a GPU for this build but again, I'm cool with discussing the idea of a barter if anyone reading this is in the market for one.

I also have some GTX 1080 TI's but those are already spoken for, sorry.

It's my understanding that select CPU's I have on this list are ECC Friendly and AFAIK, only 1 of my MOBO's claims to be ECC Friendly (The ASROCK AB350M PRO4), but for the life of me, I can't find any corresponding forums that confirm this and/or direct me to a listing where I can buy compatible RAM. Just the same, if I go w/ the ASROCK MOBO, that means I'd be using one of the Ryzens. Those are DEF. power hungry little buggers. Not a deal-breaker, just hoping to find something a little more conservative in terms of TDP.


In closing, I don't really need someone to hold my hand with the build part as much as figuring out which motherboard, CPU and RAM to get. Then I'm DEFINITELY going to need some guidance on what OS is best for my desired purpose. If building 2X Rigs makes sense, I'm totally open to that as well...
Rig 1 = EPIC NAS SYSTEM
Rig 2 = EPIC PFSENSE (or the like) DEDICATED FIREWALL

Oh, I almost forgot... The current routers I'm using are...
1X Netgear Nighthawk 6900P (Modem + Router)
1X Netgear Nighthawk X6S (AC 4000 I believe - Router dedicated towards my personal devices - no IoT &/or Guests allowed on this one)
1X TP-Link Archer C5 (Router). Total overkill after implementing the Nighthawks but this old beast somehow has the best range, plus it has 2X USB ports so for now, it's dedicated towards my IoT devices.
---- I also have a few other Wi-Fi routers (Apple Airport Extreme & some inferior Netgear's but I can only allocate so many WiFi Routers to so many WiFi channels w/out pissing off my neighbors) On that note, I have managed to convince my neighbors to let me in their house/WiFi configuration so we all have our hardware locked on specific, non-competing frequencies/channels so everyone's happy. :)


Please spare me the insults as I insulted myself throughout this entire venture. Part of why I did this was because when I was a kid, I used to fantasize about building a 'DREAM PC' but could never afford such. To compensate for this deficiency, I would actually print out the latest and greatest hardware components on a word document, print the lists up & tape to wall (for motivation). I was C++ certified at the age of 14 and built my first PC when I was 7. At the age of 15 I abandoned all hope in the sector and moved on to other aspirations. This entire ordeal was largely based off me finally fulfilling a childhood fantasy. On that note = mission accomplished. Now if I'm actually able to fulfill my desires on this post, I'm definitely going to feel less shitty about blowing so much money on all this stuff over the last couple years.

TIA for assisting in any way possible. Gotta love the internets!


THE END.
:)

EDIT/UPDATE (5 hours after OP) - My inbox is being inundated with various people asking for prices and other reasonable questions about my hardware being up for sale. Not to be redundant but rather to expound on my previous remarks about 'being interested in a bartetrade' with any of you here...

I did say I was going to sell my gear on eBay in the near future, I also said I wanted to trade/barter for anything relative to helping me accomplish my OP's mission(s). I'm not desperate for the $$$ but I'm also not one of those people that likes to rip other people off. That said; I value my time and money invested in this hardware and I'm only willing to unload it all once I've established I have ZERO need for any of it here in my home first. Hence my writing this lengthy thread in an attempt to repurpose at least a grand or two I've already spent.

One of the most commonly asked questions I anticipate receiving from interested bodies is going to be "How hard were you on your hardware?" Contrary to what anyone else would have probably done in my scenario which is say they were light on it whether they were or weren't, I documented my handling of the hardware, and have no problem sharing such documentation with verified, interested buyers (WHEN THE TIME COMES) to offer you guys peace of mind.

I have photo's and video's of the venture from A-Z. I am also obliged to provide (redacted) electricity bill statements where you can correlate my photo's (power draw on each rig), and also accurately deduct the excess power my house consumed with our other household appliances. Even taking into consideration how much (more) I spent in electricity from keeping my house at a constant, cool 70-72F year-round (via my Nest thermostat). Even without the rigs, I keep my AC @ 70 when I'm home and for the last 1.5-2 years, I just so happened to spend 85% of my time here at my house. When I would travel, I'd keep it at 72 for my wife & kids.
Additionally; I had each GPU 'custom' oveunderclocke'd (MSI Afterburner for all GPU's but the EVGA's).*
I doubt everyone reading this is aware so this is for those that don't.... EVGA had the brilliant idea of implementing what they call "ICX technology" in their latest NVIDIA GTX GPU's. The short(est) explanation of this "feature" goes as follows:

EVGA GPU's w/ "ICX 9 & above" have EXTRA HEAT/THERMAL SENSORS. Unlike every other GTX 1070 ti on the market, the one's with this feature actually have each of 2/2 on-board fans connected to individual thermal sensors. Which means - if you were to use the MSI Afterburner program on one of these EVGA's and create a custom fan curve for it, you'd only be able to get 1/2 of the fans to function the way intended. The other fan simply would not engage as the MSI Afterburner software wasn't designed/coded to recognize/ communicate with an added sensor (let alone sensor'S). This, in-turn, would likely result in whoever's using it the unintended way having a GPU defect on them within the first few months I'd imagine... Perhaps if they had the TDP power settings dumbed down as much as I did (60-63%), they might get a year or two out of it since it wouldn't run as near as hot, but I doubt any longer than that since cutting off 50% of the cooling system on one of these can't be ignored too long, surely capacitors would start to blow and who knows what else...
(Warning = RANT) Another interesting side-note about the EVGA's and their "Precision-X" OveUnderclocking software is that it's designed to only recognize 4X GPU's on a single system. For miners, that's just not cool. My favorite builds had 8X and for the motherboards that weren't capable of maintaining stable sessions on 8, I set up with 6X. Only my EVGA Rigs had 3 or 4X GPU's dedicated to a single motherboard. Furthermore, and as stated in an earlier paragraph, (& this is just my opinion) = EVGA SOFTWARE SUCKS! Precision X wasn't friendly with every motherboard/CPU I threw at it and their extension software for the CLC Close-Loop-Cooling/ CPU water-coolers simply didn't work on anything, even integrating into their own Precision-X software. The amount of time it took me to finally find compatible matches with that stuff was beyond maddening. (END RANT).
Which leads me to my other comments on the matter. That's what I had every single 1070 ti set at for TDP = 60-63%. Dropping the power load that much allowed me to bring down (on average) each 1070 ti to a constant 110-115W (mind you, this is only possible w/ "Titanium" rated PSU's, Platinum comes pretty damn close to the Titanium though) while mining Ethereum and was still able to maintain a bottom of 30 MH/s and a ceiling of 32 MH/s. Increasing the TDP to 80, 90, 100% or more only increased my hashrates (yields) negligibly, like 35-36 MH/s TOPS, which also meant each one was not only pulling 160-180W+ (Vs. the aforementioned 115'ish range), it also meant my rigs were creating a significantly greater amount of heat! Fortunately for the GPU's and my own personal habits, I live in South Florida where it's hot as balls typically, last winter was nothing like this one. Increasing my yields by 10-15% didn't justify increasing the heat production in my house by >30%, nor the added electricity costs from subjecting my AC handlers to that much of an extra work-load. For anyone reading this that doesn't know/understand what I'm talking about - after spending no less than 2-3 hours with each. and. every. one. I didn't play with the settings on just one and universally apply the settings to the rest. I found the 'prime' settings and documented them with a label-maker and notepad. Here's the math in a more transparent manner:

*** I NEVER LET MY GPU's BREACH 61C, EVER. Only my 8X GPU rigs saw 60-61 & it was the ones I had in the center of the build (naturally). I have REALLY high power fans (used on BTC ASIC MINERS) that were sucking air from those GPU's which was the only way I was able to obtain such stellar results while mining with them. **\*
Mining at "acceptable" heat temps (not acceptable to me, but most of the internet would disagree = 70C) and overclocking accordingly brings in X amount of yields per unit. =
'Tweaking' (underclocking) the GPU's to my parameters reduced my yield per unit from -10-15%, but it SAVED me well over 30-35% in direct electricity consumption, and an unknown amount of passive electricity consumption via creating approximately 20%+ less heat for my AC handler to combat.

I say all this extra stuff not just for anyone interested in mining with their GPU's, but really to answer (in-depth) the apparent questions you people are asking me in PM's. Something else that should help justify my claims of being so conservative should be the fact I only have/used "Platinum and Titanium" rated PSU's. Heat production, power efficiency and longevity of the hardware were ALWAYS my top priority.* . I truly thought Crypto would continue to gain and/or recover and bounce back faster than it did. If this project had maintained positive income for 12 months+, I'd have expanded one of our sites to also cater to GPU mining on a gnarly scale.

Once I have my NAS (& possibly 2nd rig for the firewall) successfully built, I'll be willing/able to entertain selling you guys some/all of the remaining hardware prior to launching on eBay. If there's something you're specifically looking for that I listed having, feel free to PM me with that/those specific item(s). Don't count on an immediate response but what you can count on is me honoring my word in offering whoever asks first right of refusal when the time comes for me to sell this stuff. Fortunately for me, PM's are time-stamped so that's how I'll gauge everyone's place in line. I hope this extra edit answers most of the questions you guys wanted to have answered and if not, sorry I guess. I'll do my best to bring light to anything I've missed out on after I realize whatever that error was/is. The only way anyone is getting first dibs on my hardware otherwise is if they either offer compelling insight into my original questions, or have something I need to trade w/.

THE END (Round#2)


submitted by Im-Ne-wHere to buildapcforme [link] [comments]

The World’s 1st Graphics Card Integrated Miner Is Shipping in November, 2016

Dear folks in the community,
My name is Zoey and I’m here on behalf of the company to announce the official launch of our new brand - PandaMiner, the world’s first graphics card integrated altercoin miner. (www.pandaminer.com)
You may have seen all kinds of self-made GPU miners, but PandaMiner is the first that integrates top-level graphics cards into a real powerful altercoin miner, supported by our innovative technology and manufacturer expertise that guarantee a much higher mining yield than normal GPU miners.
PandaMiner will be soon shipped globally in November 2016. There will be two products released with different hashing powers, depending on the number of graphics card integrated. The graphics card we use is RX480 of AMD chip. The miner will be able to provide as much as 240 MHS hashing power. And most importantly, it can mine all altercoins that run under ETH, ZCASH, LTC...
PandaMiner is a startup company based in China but we already have years of experience in the industry and a professional team with huge passion and strong faith in the crypto-world. We see a rising momentum of altercoins - that’s why we chose to focus on them instead of Bitcoin. And we’ve maximized our capabilities in cost control and quality management that gave birth to the innovative product, and a great option for altercoin fans.
If you have any questions regarding our new miners, please feel free to discuss here or contact our service team [email protected] We would like your witness of a new way to renovate the industry.
UPDATE: Detailed Specification will release on next week!
http://a3.qpic.cn/psb?/V13WdTtu4FTQ5t/Z*6oxK9B6yJ5o69jjGkpRg2bXcP3FiSE*PyFw8VDTYQ!/b/dAoBAAAAAAAA&bo=VQOAAgAAAAAFB*A!&rf=viewer_4 http://a2.qpic.cn/psb?/V13WdTtu4FTQ5t/zc05ltYfzGBS0UOGO8BHpREiHZFv6mGqWROKrUUb4O8!/b/dAwBAAAAAAAA&bo=gAKAAgAAAAAFACM!&rf=viewer_4 http://a2.qpic.cn/psb?/V13WdTtu4FTQ5t/JVrEbl6*34d5efD9Ztc4dDoccBHg.EJZ59lIqNTfIAw!/b/dHIBAAAAAAAA&bo=gAKAAgAAAAAFACM!&rf=viewer_4 http://a3.qpic.cn/psb?/V13WdTtu4FTQ5t/CxKuXOTMA4bdfvA43i4pLNNFG7jmxmURejVvlgs5F8Y!/b/dAoBAAAAAAAA&bo=gAKAAgAAAAAFACM!&rf=viewer_4 http://a2.qpic.cn/psb?/V13WdTtu4FTQ5t/y8a1fVN3oGVt0HuLSWkuYsNpL1*2JC7G2Fq6ZUPN3dc!/b/dAkBAAAAAAAA&bo=gAKAAgAAAAAFACM!&rf=viewer_4
The first Graphics Card Integrated Miner in our office, all running well for eth and zcash.CHECK ALL THE IMAGES HERE.
Detailed Specification:
1,Hash Rate: 230MH/s (ETH) & 580SH/s (Zcash mining 4.0). Variation of ±5% is expected(increase with ZEC mining software update)
2,Power Consumption: 1380W +10% (ETH) & 1050W +10% (Zcash) (at the wall, with PandaMiner’s power, 93% efficiency, 25°C ambient temp)
3,,Rated Voltage: 12.4 to 12.6V
4,Chip quantity per unit: 8 * RX480
5,Dimensions: 505mm(L) x 188mm(W) x 66mm(H)
6,Cooling: 16x fans; 8cmx8cm
7,Operating Temperature: 0°C to 40°C
8,Network Connection: Ethernet
PandaMiner Service www.pandaminer.com
submitted by Zoey-zou to Monero [link] [comments]

[Help] Looking to get started. Questions and Concerns

So, I'm at school, and I'm going to be in the dorms next year. I mainly use my laptop for my work / play, but I have a desktop back home that was my rig before I came here. I was thinking about ripping out the NVidia GTS 250 and putting in a card or two for bitcoin / litecoin mining. It sports an AMD Athlon II X4 CPU @ 2.6GHz and 8GB RAM with a 650W PSU. I was thinking about putting a 7970 or two in. I know that there are other cards, but this would allow it to fall back as a great gaming rig if mining doesn't turn out. The plan was also to set up some liquid cooling to keep it from running too hot. I think this investment would be around $1500 max (This includes some money for an initial direct investment in bitcoins / litecoins).
I have done a bit of research for the past few days on this, and I'm a bit hesitant to get started. The cost of power is no concern, so I'm guaranteed to make SOME money. Even if it takes a year for me to break even, that's okay. However, I know that a lot of people are saying NOT to get into bitcoin mining due to the new ASIC miners coming out that are going to fuck the difficulty for GPU rigs. I also hear a lot of people saying that getting into Litecoin mining is an alternative due to it's low hash rate requirement. However, won't ASICs also screw the difficulty here as well, despite it being very low right now (compared to bitcoins)?
Last concern I have is that I want to try out litecoin mining a bit first. However, my gaming laptop isn't cooled very efficiently, and it is currently my only machine besides my phone. It has a 7970M and an i7 Ivy Bridge. I did some bitcoin mining just to test speeds, and the 7970M would pull 320 - 350 Mh/s which isn't awful. However, the temps would get upwards of 90C, and the CPU while litecoin mining would get to about 89C with only 1.5 Mh/s. Now I may be wrong, but this seems too hot. I tested these temps against the load from Hitman: Absolution, and while it wasn't quite maxed, it would still run the temp up to about 90C. I've played this and many other high demand games for over a year, and have had no issues. How safe would it be for me to run some litecoin mining on this laptop?
Rundown:
If I'm not paying for power, would a ~$1500 investment in a mining rig be a smart idea for bitcoin / litecoin mining?
Is this planned rig even a good idea, or should I be going for the less available but more efficient cards?
Have I missed the boat entirely and is bitcoin / litecoin mining just not a good idea in general anymore?
Would it be safe for my laptop to run some litecoin mining on it for short 1hour spurts?
Thanks very much in advance!
submitted by TheGadgetCat to BitcoinMining [link] [comments]

Config post, just in case someone finds it useful.

Was responding to another user's post, figured it might help any other new people. This is one rig that produces 3.9 mh/s at 1600 watts (measured with killawatt), is stable with ~1.2% error rate, ~70C temps.
1 of these http://www.amazon.com/MSI-Computer-Corp-Motherboards-Z77A-G45/dp/B007QWI9TY/ref=sr_1_1?ie=UTF8&qid=1375396364&sr=8-1&keywords=msi+z77-g45a
1 of these http://www.amazon.com/Intel-Celeron-2-60GHz-Processor-BX80637G1610/dp/B00B4BJYVU/ref=sr_1_1?ie=UTF8&qid=1375396383&sr=8-1&keywords=celeron+g1610
1 of these http://www.amazon.com/LEPA-1600-Watts-Crossfire-Certified-G1600-MA/dp/B007W5TV6K/ref=sr_1_1?ie=UTF8&qid=1375396400&sr=8-1&keywords=lepa+1600
6 of these http://www.amazon.com/Gigabyte-Mini-Displayport-PCI-Express-Graphic-GV-R795WF3-3GD/dp/B007581QHG/ref=sr_1_1?ie=UTF8&qid=1375396424&sr=8-1&keywords=gigabyte+7950
1 of these http://www.amazon.com/Samsung-Series-120GB-internal-MZ-7TD120BW/dp/B009NHAF06/ref=sr_1_2?ie=UTF8&qid=1375396482&sr=8-2&keywords=samsung+840
1 of these http://www.amazon.com/dp/B003ZDJ42O/?tag=pcpapi-20
2 of these http://www.amazon.com/Micro-SATA-Cables-Express-Flexible/dp/B0057M16Q8/ref=sr_1_2?ie=UTF8&qid=1375396635&sr=8-2&keywords=pci+risers
1 of these http://www.amazon.com/Powered-Flexible-Extender-Bitcoin-Mining/dp/B00CQB1RIU/ref=sr_1_1?ie=UTF8&qid=1375396667&sr=8-1&keywords=powered+pci+risers
3 of these http://www.amazon.com/Powered-Flexible-Extender-Bitcoin-Mining/dp/B00CQBCKPY/ref=sr_1_2?ie=UTF8&qid=1375396667&sr=8-2&keywords=powered+pci+risers
1 of these http://www.lowes.com/pd_328959-80752-142430B-DS_0__?productId=3468765&Ntt=shelves&pl=1¤tURL=%3FNtt%3Dshelves&facetInfo=
2 of these http://www.lowes.com/pd_95021-1621-3733_0__?productId=1114391&Ntt=box+fan&pl=1¤tURL=%3FNtt%3Dbox%2Bfan&facetInfo=
a shitload of these http://www.lowes.com/pd_292678-1781-45-518UVL_0__?productId=3201639&Ntt=zip+ties&pl=1¤tURL=%3FNtt%3Dzip%2Bties&facetInfo=
And the lid from the cardboard box the motherboard came in. Makes a perfect motherboard tray.
Windows 8, catalyst 12.8, cgminier 3.1.1
setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_USE_SYNC_OBJECTS 1 color 02 timeout /t 45 cgminer --scrypt -o coinotron.com:3334 -u user -p pass --no-submit-stale --gpu-fan 80 --gpu-reorder --thread-concurrency 22400 --lookup-gap 2 --gpu-engine 1125 --gpu-memclock 1250 -w 256 -I 19 -g 1
submitted by pork_belly to litecoinmining [link] [comments]

[SG] Stable 2.6 MH/s Scrypt Mining Rig

Photo Gallery - http://imgur.com/a/z9Wka#0
Your looking at a complete scrypt mining rig which mines or creates altcoins. This mining rig will create cryptocurrency such as Litecoin, Dogecoin, and more.
Currently selling this mining rig at 2100 USD which is a lot less than what I paid for the entire thing brand new. It has been mining dogecoin/litecoin/etc for 3 weeks and it turns out after my electric bill + summer time coming soon it will not be profitable for me as I pay .14 cents a kilowatt.
The mining rig was restarted every Friday for basic dusting and maintenance and purs like a kitten. Price is negotiable depending on the drive your willing to make to Dallas TX (PM for Location). The rig has been in my garage and has always had temps of 76-78 or lower.
One thing about this setup is you don't have to do a thing but sign up for the pool you want, type in your username/pass and your mining within minutes. No Setup required as i've gotten the perfect settings for each card on the rig. I've also placed each card to get maximum airflow without pulling heat from neighboring cards, henced the 280x angled upward to pull cooler air.
It is also setup to automatically reboot and start mining on it's own in case of a power outage. I can also disable this feature as that is what I prefer to do. I like manually starting my rig once a week to make sure things are running flawless.
These cards have all been undervolted, overclocked, and set up to be the most efficient and fast at what they do. Stability is key with mining cryptocurrency and I can proudly say this 2.6 MH/s mining rig has run a week at a time before I manually restart it to dust it. You can choose to let it mine tirelessly for as long as you want but I recommend dusting it often. I'm sure this baby can mine for months without being touched.
All or most hardware has original boxes.
Complete Scrypt Mining Rig With Aluminum Frame + Box Fan:
GPU's:
This does not come with a keyboard, monitor, or a mouse. I run this thing headless and directly remote in using splashtop so I have control of my rig wherever i'm at using my macbook.
I am willing to ship the rig taken apart in 1 Huge Box with all original boxes inside + hardware if you pay the shipping. It will be carefully packed and sent via UPS, you can also add insurance which will also be paid by you.
You can also meet me or come take a look at the rig if your interested, i'm located in Dallas Tx. PM me for exact address and phone number if interested.
I will accept Chase Instant Pay, Dogecoin, Bitcoin, or Litecoin.
I will not sell the rig in parts it's buy all or nothing.
Note: As you can see I have two instances of SGminer running, the mining program I use. This is because I use different settings for the Sapphire 280x's and different intensity/thread concurrency settings for the R9 versions of the cards which are the 290x/270.
submitted by Thatdudesly to dogemarket [link] [comments]

Bitcoin Mining Update - Wemo, Miner Control, GPU Rig Control, Bitmain Replacement Bitcoin Mining on an Asus Geforce GTX 1070 Strix OC GPU 4 MH/S Scrypt Miner - GPU Litecoin mining rig Bitcoin Mining on combined GTX 1070 and 960 GPUs 36 GPU Mining Rigs 1 GH ETH , 25 MH XMR, ETN

The Sapphire Block Erupters were the first Bitcoin USB miners. They have 330 MH/s of hash power which would net you less than $0.01 per month. It may be a good choice just to see how mining works, but like with most USB miners: do not expect to turn a profit. The EVGA SuperNOVA 1300 Watt GPU PSU, which sells for about $170 on Amazon. Note Once you’ve built a GPU mining rig from a hardware perspective, the next task is to find the right software to start mining. We’ve compiled a list of GPU mining software options below. We have only included software that has been updated in the last 12 months and we’ve placed the miners we ourselves use at the top of the list. After creating new worker for the second Gpu, it still doesnt work 0 Mhashes the first gpu at 304 Mhashes clock at 970 Mhz 60% fan speed temp 74 degrees Celsius flags -v -w128 -a4. Also: ATI must be loving this, and if the exchange rate stays favorable to the monthly projected output of a nice GPU I imagine sales are going to continue to grow for the high-end cards. Crypto Coin Mining Rig 7x GTX1070 8GB ETH Ethereum 212 MH/s Zcash 3000 Sol/s ZEC. $3,999.00. Brand: NVIDIA. Free shipping. or Best Offer. PDU Cyber Power Suppy 240V Locking Plug & 4 Power Cords GPU Miner Bitcoin 24 Amp. $17.50. 0 bids 10 X Antminer T9 S1 S3 S5 S7 S9 A3 D3 L3 V9 5" 120mm High Temp Fan Duct Shroud. $30.99. Brand: Antminer

[index] [11289] [7096] [16878] [867] [18970] [13470] [8348] [13516] [2367] [5035]

Bitcoin Mining Update - Wemo, Miner Control, GPU Rig Control, Bitmain Replacement

- GPU protection temperature is also a safety setting, it wont let your GPU's overheat, and if a GPU reaches this temperature, it will be turned off until it cools down by 15c, then it will be ... Same thing for gpu rigs. Also talking about bitmain sending me back a bad replacement. ... S9 Bitcoin Miner Overclock Hash Rate / Temps / Watts - Duration: 3:35. ... Bitcoin / GPU Mining Farm ... How to set UP BITCOIN ... 3:22. 11 GPU Mining Rig @ 337 MH/s (MSI Radeon RX 580 Gaming X 8GB) - Duration: 1:07. Elvis Morales 20,006 views. 1:07. New fan for the Mining Tent is Awesome! lower ... Today i show you a new minetrick, you must know the safe temparatures of your cards! Discord chat of the Channel: https://discord.gg/6PwuaTq Facebook page: h... This video show the results of Bitcoin mining with dual GPUs - Asus TGX 1070 Strix OC and Gigabyte GTX 960 G1 using Nicehash. The CPU and GPU temps and ultilizations are show and the temp impact ...

Flag Counter